Anybody here ever rebuilt an SM420? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shp4man · 12-17-2018, 10:52 AM

Do you need a press or any special tools? The bearings in mine are beginning to make noise.

**The Rocknrod** · 12-17-2018, 11:49 AM

No but I found a place for parts:
https://www.novak-adapt.com/catalog/...s/sm420-parts/

shp4man · 12-17-2018, 12:12 PM

Quote:

Originally Posted by The Rocknrod

No but I found a place for parts:
https://www.novak-adapt.com/catalog/...s/sm420-parts/

Well, it says "We suggest the rebuilder have access to a set of snap ring pliers, and a small arbor press, in addition to standard shop tools.".

So there's the answer. thanks buddy!

**The Rocknrod** · 12-17-2018, 01:08 PM

I rebuilt a Saginaw 4 speed at the auto hobby shop on Miramar when it was a NAB. Not that bad to do. They had a shop manual I used. You can do it Luke.

shp4man · 12-17-2018, 01:13 PM

Thanks, Master Chief!

66C10LB · 12-17-2018, 07:55 PM

As far as I can tell so far, synchro rings are not available for the SM420 (in case they are needed). Novak notes on their site that they hope to have them available in the future.

Grounded63 · 12-18-2018, 06:04 PM

Some minor googling, will bring up other sources for synchronizer rings.

Short 3/4 · 12-19-2018, 12:55 AM

I've had good luck with Torque King-very nice and helpful on phone

12-17-2018, 10:52 AM	#1
shp4man Registered User Join Date: Oct 2016 Location: San Diego, CA Posts: 557	Anybody here ever rebuilt an SM420? Do you need a press or any special tools? The bearings in mine are beginning to make noise. __________________ Everybody has to believe in something. I believe I'll have another beer.

12-17-2018, 11:49 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Anybody here ever rebuilt an SM420? No but I found a place for parts: https://www.novak-adapt.com/catalog/...s/sm420-parts/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-17-2018, 01:08 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Anybody here ever rebuilt an SM420? I rebuilt a Saginaw 4 speed at the auto hobby shop on Miramar when it was a NAB. Not that bad to do. They had a shop manual I used. You can do it Luke. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-17-2018, 01:13 PM	#5
shp4man Registered User Join Date: Oct 2016 Location: San Diego, CA Posts: 557	Re: Anybody here ever rebuilt an SM420? Thanks, Master Chief! __________________ Everybody has to believe in something. I believe I'll have another beer.

12-17-2018, 07:55 PM	#6
66C10LB Registered User Join Date: Jul 2016 Location: West Kelowna, BC, Canada Posts: 204	Re: Anybody here ever rebuilt an SM420? As far as I can tell so far, synchro rings are not available for the SM420 (in case they are needed). Novak notes on their site that they hope to have them available in the future.

12-18-2018, 06:04 PM	#7
Grounded63 Registered User Join Date: Dec 2016 Location: Canon City, Colorado Posts: 124	Re: Anybody here ever rebuilt an SM420? Some minor googling, will bring up other sources for synchronizer rings.

12-19-2018, 12:55 AM	#8
Short 3/4 Registered User Join Date: Jan 2017 Location: Los Osos Ca Posts: 560	Re: Anybody here ever rebuilt an SM420? I've had good luck with Torque King-very nice and helpful on phone __________________ 65 short stepside K10 292-SM420-T221 8 lug closed D44 front NoSpin HO72 4.10 rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.