47-55.1 Holding Hubcaps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mechanixman · 02-19-2019, 01:06 AM

Hey Folks
How do you fasten your hubcaps to your wheels? Is it worth buying them or just making them youself? do you tack weld them to the wheels? or drill and screw/bolt them in?

Pic for attentiton.

Thanks,

**joedoh** · 02-19-2019, 02:33 AM

Quote:

Originally Posted by mechanixman

do you tack weld them to the wheels?

well that escalated quickly.

I recently put stock clip caps on a rally wheel by trimming the clip cap a little and welding a cheap rally cap to it. worked great.

for your case, you have clip caps and nub wheels. you might be able to order clips to drill and screw to the center portion of the wheel and that will let the clip caps fit. do a search on ebay for VW hubcap clips, sometimes you can get 20 for under 15 bucks. then you measure, mark, spin the wheel with a marker so its a true circle, drill and attach.

also, there is a guy who modifies caps and wheels, may not be cheap but his website is thewheelsmith.net

**mr48chev** · 02-19-2019, 03:12 AM

It would be simpler to buy a set of the correct wheels with the clips on them.

Then you wouldn't have those nubs sticking out around the hubcap and holding it off the wheel.

*Jesse Z* · 02-19-2019, 07:07 AM

Quote:

Originally Posted by mechanixman

How do you fasten your hubcaps to your wheels? do you tack weld them to the wheels?

Of course not, that would be ridiculous.

For safety sake hubcaps must be fully welded to the wheel around their entire circumference.

nvrdone · 02-19-2019, 10:10 AM

just use duct tape. that should hold them on for the first block ….

**joedoh** · 02-19-2019, 12:04 PM

Quote:

Originally Posted by mr48chev

It would be simpler to buy a set of the correct wheels with the clips on them.

Then you wouldn't have those nubs sticking out around the hubcap and holding it off the wheel.

i dont think there are a lot of options for wide 8 lug wheels that take clips. most clip 8 lugs are widowmakers and 5 inches wide.

but if thats what you want, wheelsmith can make them too, the wheels and the caps. keep in mind he wanted $160 ea for those gmc hubcaps to fit rally centers, probably totally worth it but I did all 4 myself for $150.

I would probably get a flatter nub hubcap and weld the clip hubcap to it after trimming the back flat. it would have a shoulder you could paint the wheel color and I bet no one would notice ever.

**mr48chev** · 02-19-2019, 02:11 PM

My bad there, I didn't even count the lugs. Yup that is a big problem. When you get old your eyes don't always tell you the whole story.

What about taking a painted 8 lug hubcap and trimming the center out and using it as an adapter for the smaller cap? Paint it to match the wheel and it shouldn't show that much.

**71blksuper4x4** · 02-23-2019, 05:47 AM

I think there are aftermarket clips for Volkswagens? Maybe that should work.

1project2many · 02-23-2019, 04:02 PM

I bought aftermarket clips for a Chevy truck thank you very much. They may have been designed for a VW, but they were sold for the truck so that's what I'm going with.

And after they were purchased, I have never used them. Instead I found stainless baby moon caps that fit nub wheels.

So i have this bag of clips taking up valuable shelf space...

02-19-2019, 01:06 AM	#1
mechanixman Registered User Join Date: Sep 2012 Location: Mt. Prospect, ILL Posts: 820	Holding Hubcaps Hey Folks How do you fasten your hubcaps to your wheels? Is it worth buying them or just making them youself? do you tack weld them to the wheels? or drill and screw/bolt them in? Pic for attentiton. Thanks, Attached Images __________________ -Nick Projects: 1952 Chevy 1 ton = The Build page

02-19-2019, 03:12 AM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Holding Hubcaps It would be simpler to buy a set of the correct wheels with the clips on them. Then you wouldn't have those nubs sticking out around the hubcap and holding it off the wheel. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

02-19-2019, 10:10 AM	#5
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,482	Re: Holding Hubcaps just use duct tape. that should hold them on for the first block ….

02-19-2019, 02:11 PM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Holding Hubcaps My bad there, I didn't even count the lugs. Yup that is a big problem. When you get old your eyes don't always tell you the whole story. What about taking a painted 8 lug hubcap and trimming the center out and using it as an adapter for the smaller cap? Paint it to match the wheel and it shouldn't show that much. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

02-23-2019, 05:47 AM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Holding Hubcaps I think there are aftermarket clips for Volkswagens? Maybe that should work. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-23-2019, 04:02 PM	#9
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: Holding Hubcaps I bought aftermarket clips for a Chevy truck thank you very much. They may have been designed for a VW, but they were sold for the truck so that's what I'm going with. And after they were purchased, I have never used them. Instead I found stainless baby moon caps that fit nub wheels. So i have this bag of clips taking up valuable shelf space...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.