S10 Transmission Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

puttputt1977 · 07-24-2019, 06:00 PM

So I have a 1965 longbed with a 327 in it. It already has a 3 on the floor but the shifter is to close the seat. I'm wanting to put a s10 transmission in it. What all do I need to put one in my truck besides the transmission its self. Thanks for any info.

**slepysal** · 07-24-2019, 11:36 PM

Lots and lots of info using the search .

here is one from the faq section

http://67-72chevytrucks.com/vboard/s....php?p=4871869

and one from LUGNUTZ
https://lugnutz65chevystepside.weebl...rear-axle.html

rvrfoot · 07-26-2019, 07:18 PM

Why a s10 trans????????

puttputt1977 · 07-27-2019, 05:31 PM

Quote:

Originally Posted by rvrfoot

Why a s10 trans????????

That's what I was told would bolt up to my 327 and they are fairly cheap to find.

**slepysal** · 07-27-2019, 09:34 PM

your welcome for the links

**jocko** · 07-28-2019, 12:35 AM

Quote:

Originally Posted by rvrfoot

Why a s10 trans????????

The real reason it's a good idea is because it's a 5-speed trans with overdrive - and the S10 variant of the T5 has the stick in the right place to clear a bench seat. Low highway rpm is the benefit. It's light duty, but is fine behind a small V8 as long as not abused. There a few "world class" S10 transmission out there, but not many - WC is slightly beefier. The best combo is a Camaro main case with an S10 tailshaft - avoids the spacing required with an S10 input shaft yet has stick correctly located.

Quote:

Originally Posted by puttputt1977

That's what I was told would bolt up to my 327 and they are fairly cheap to find.

Just about any trans GM ever made will fit behind your 327.

Quote:

Originally Posted by slepysal

your welcome for the links

Those ARE some good links by the way...

**slepysal** · 07-28-2019, 12:48 PM

Those ARE some good links by the way...

[/QUOTE]

Vincenthdfan · 07-28-2019, 02:38 PM

The previous owner that I bought my 62 SWB from installed a World Class Camaro T-5 with an S-10 tail housing.

It is an outstanding combo and I really like it. It fits like it was made for the truck, shifts like butter...cant beat it.

I just installed a brand new crate 350 motor but have no intentions of driving it hard, so trans should last a good long time (knock on wood).

If I ever win the lottery or get the desire to do burnouts I may upgrade to a different trans at a later date, but for now I'm plenty thankful for the trouble the previous owner went to on my truck.

puttputt1977 · 07-31-2019, 02:16 PM

Quote:

Originally Posted by slepysal

your welcome for the links

Sorry about that. I appreciate your help. A lot of great info there. Thanks again.

**slepysal** · 07-31-2019, 09:46 PM

Quote:

Originally Posted by puttputt1977

Sorry about that. I appreciate your help. A lot of great info there. Thanks again.

no worries

07-24-2019, 06:00 PM	#1
puttputt1977 Registered User Join Date: Sep 2016 Location: Albemarle Posts: 21	S10 Transmission Question So I have a 1965 longbed with a 327 in it. It already has a 3 on the floor but the shifter is to close the seat. I'm wanting to put a s10 transmission in it. What all do I need to put one in my truck besides the transmission its self. Thanks for any info.

07-24-2019, 11:36 PM	#2
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: S10 Transmission Question Lots and lots of info using the search . here is one from the faq section http://67-72chevytrucks.com/vboard/s....php?p=4871869 and one from LUGNUTZ https://lugnutz65chevystepside.weebl...rear-axle.html __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-26-2019, 07:18 PM	#3
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: S10 Transmission Question Why a s10 trans????????

07-27-2019, 09:34 PM	#5
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: S10 Transmission Question your welcome for the links __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-28-2019, 12:48 PM	#7
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: S10 Transmission Question Those ARE some good links by the way... [/QUOTE] __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-28-2019, 02:38 PM	#8
Vincenthdfan Registered User Join Date: Sep 2014 Location: Olympia, Washington Posts: 172	Re: S10 Transmission Question The previous owner that I bought my 62 SWB from installed a World Class Camaro T-5 with an S-10 tail housing. It is an outstanding combo and I really like it. It fits like it was made for the truck, shifts like butter...cant beat it. I just installed a brand new crate 350 motor but have no intentions of driving it hard, so trans should last a good long time (knock on wood). If I ever win the lottery or get the desire to do burnouts I may upgrade to a different trans at a later date, but for now I'm plenty thankful for the trouble the previous owner went to on my truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.