|
08-08-2019, 02:08 AM
|
#1 |
|
Registered User
Join Date: Mar 2015
Location: rochester
Posts: 49
|
Wide band 02?
Here's my rundown. 2000 vortec 6.0, 4l80 trans with speed engineering headders and there xpipe. My question is where do I put the wide band 02 sensor. Do I need a duel sensor or am I able to put one in. Thanks in advance
Tim |
|
|
|
08-08-2019, 07:15 AM
|
#2 |
|
Registered User
Join Date: Feb 2011
Location: Parkville, MD
Posts: 1,024
|
Re: Wide band 02?
From what I've read...
Should be about 3' from the closest cylinder. Too close and it gets too hot, too far away and it gets too cold. You want it at least 6" after the collector. You want ti in a piece of pipe that is straight for at least 6", as bends can interrupt flow. Should be at least 15* above parallel to the ground. You can run 1 sensor after one header, or one after each header. Up to you. Both sides SHOULD be pretty even. If you google around "wideband location" you will get tons of results.
__________________
1970 C20 Custom Camper - 350, TH350 1997 GMC Suburban 1994 Acura Integra GSR 1987 Dodge Daytona Shelby Z |
|
|
|
|
08-09-2019, 02:47 PM
|
#3 |
|
Registered User
Join Date: Nov 2012
Location: 9
Posts: 862
|
Re: Wide band 02?
3 to 18 inches from the collector seems to be a popular answer.
Run a wideband in addition to your stock sensors. |
|
|
|
|
08-25-2019, 11:02 PM
|
#4 |
|
Post Whore
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,868
|
Re: Wide band 02?
fugly, yes! but effective, I plan on running two Wideband AEM O2 sensors in addition to my narrow band sensors at all times, and when not just plug the second bungs with a plug (you don't want to leave O2 sensors in disconnected without heating them up as they will get ruined)
2.5" dual exhaust made out of all GM 2500 3/4 donor truck intermediate pipes and Suburban over the axle tail pipes |
|
|
 |
| Bookmarks |
|
|
Linear Mode
