The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-03-2019, 04:55 PM   #1
Chopped53
Registered User
 
Join Date: Jul 2019
Location: Calgary, Alberta
Posts: 81
'54 rear bumper on a '53?

Hey there. I'm new to the forum. I posted an introduction and photo in the welcome section. I am hoping you guys can help me with this one. My plan is to put a '54 rear bumper on my '53. I like the little license plate bump. I'm thinking of mounting it upside down with the dual exhaust coming out in the bump.

I was in Vegas last week and stopped in at Tuckers Truck Parts to pick up some bed sides and asked about the bumper. They told me that the '54 frame is a different width than the '53 so the rear bumper won't fit, upside down or otherwise.

Is that true? Have any of you managed to get a '54 bumper onto an earlier model truck?

Here's a couple pics to give you an idea of my build.

Appreciate the help!
Attached Images
  
Chopped53 is offline   Reply With Quote
Old 09-03-2019, 05:17 PM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: '54 rear bumper on a '53?

welcome...
there are several here that run 54s on the early trucks..i was unaware of a difference in frame width at the rear on the 3100s...you could always make your own brackets if that is the case..
47-55.1 should be 46-1/32 at the rear

http://chevy.oldcarmanualproject.com...esto/54129.htm
http://chevy.oldcarmanualproject.com...resto/5070.htm
Attached Images
  
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver

Last edited by mongocanfly; 09-03-2019 at 05:31 PM.
mongocanfly is offline   Reply With Quote
Old 09-03-2019, 06:18 PM   #3
Chopped53
Registered User
 
Join Date: Jul 2019
Location: Calgary, Alberta
Posts: 81
Re: '54 rear bumper on a '53?

Thanks Mongo.....or Greg - still learning forum protocol Great forum. I knew you guys would have the answer!
Chopped53 is offline   Reply With Quote
Old 09-03-2019, 07:58 PM   #4
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
Re: '54 rear bumper on a '53?

I agree with Greg. I mounted a 54 bed on a 52 frame, just had to cut the hump down 2" for everything to line up. Bumper should be no problem. Nice ride you got going...Jim
oldman3 is offline   Reply With Quote
Old 09-03-2019, 08:36 PM   #5
nvrdone
Registered User
 
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,482
Re: '54 rear bumper on a '53?

I put a '54 rear bumper on my'49. used the stock '49 brackets. just bolted it on - no mods needed.
nvrdone is offline   Reply With Quote
Old 09-03-2019, 09:34 PM   #6
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
Re: '54 rear bumper on a '53?

As the guys said the only difference at the back is that the hump over the rear axle on 54 frames is flatter. Meaning you can't lower a 54 quite as much as a 47/53 before you have to notch it.

Width at the rear of a 54 3100 frame is exactly the same as width on 47/53.

The only other difference between the frames is that the crossmember under the bellhousing on the 54 is different than the 47/53 crossmember.That shouldn't be an issue on your truck but guys who use a Cast iron V8 bellhousing can bolt it right to a 54 but have to modify the 47/53 a bit to make it work.

That's going to be a wicked truck 4-1/2 or 5 inch chop or slightly more?
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 09-04-2019, 10:07 AM   #7
Chopped53
Registered User
 
Join Date: Jul 2019
Location: Calgary, Alberta
Posts: 81
Re: '54 rear bumper on a '53?

Thanks everyone for the info. I'll give the bumper a go.

Mr48 - It's a 4-1/2 inch chop. We angled the front posts instead of lengthening the roof, so it ended up a bit lower in the front. Real tough getting the glass to fit! Looks like yours is chopped too. Have you got any pics that you can share?

I'll be driving to her first show 'n shine in two weeks. Then I need to get it inspected for proper registration. Will probably need to get the wipers working and add an e-brake, but I hope it passes. I wanna drive it while I'm finishing it.
Chopped53 is offline   Reply With Quote
Old 09-04-2019, 10:10 AM   #8
jweb
Senior Member
 
jweb's Avatar
 
Join Date: Apr 2010
Location: Oregon
Posts: 1,208
Re: '54 rear bumper on a '53?

Like everyone said, it works fine. I ran a '54 bumper flipped for a few years and used the opening for a hitch.

Took it off when I had my truck painted since I won't be towing my camper any more.
__________________
1951 Truck, LS1/4L60
1964 Suburban, current project
2014 Silverado daily driver
1953 Westerner "canned ham" trailer, rebuilt
1974 Prowler trailer, rebuilt
jweb is offline   Reply With Quote
Old 09-04-2019, 10:34 AM   #9
Marty68
Registered User
 
Join Date: Nov 2014
Location: west coast, Wi
Posts: 534
Re: '54 rear bumper on a '53?

Quote:
Originally Posted by Chopped53 View Post
Thanks everyone for the info. I'll give the bumper a go.

Mr48 - It's a 4-1/2 inch chop. We angled the front posts instead of lengthening the roof, so it ended up a bit lower in the front. Real tough getting the glass to fit! Looks like yours is chopped too. Have you got any pics that you can share?

I'll be driving to her first show 'n shine in two weeks. Then I need to get it inspected for proper registration. Will probably need to get the wipers working and add an e-brake, but I hope it passes. I wanna drive it while I'm finishing it.
LOVE the swept back look. I usually am not to fond of this body style chopped... NICE JOB. I Believe MR 48's reworked hood will help the chop look right.
Marty68 is offline   Reply With Quote
Old 09-04-2019, 11:43 AM   #10
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
Re: '54 rear bumper on a '53?

The hood on my avatar isn't reworked outside of 120 louvers. Just an angle that makes it look slicker. Plan is to use the top half of a 4000 series hood and the bottom few inches of a 3000 series hood when I section it though.

This truck that I saw a couple of times at the Portland Roadster show has one of the nicest hood profiles I have ever seen.


I didn't take a lot of photos of it because of the crowd at the show and that is the only one in the show album.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 09-04-2019, 12:34 PM   #11
Marty68
Registered User
 
Join Date: Nov 2014
Location: west coast, Wi
Posts: 534
Re: '54 rear bumper on a '53?

I like that... a lowered roof makes the hood look so tall.
usually
Marty68 is offline   Reply With Quote
Old 09-04-2019, 12:39 PM   #12
Chopped53
Registered User
 
Join Date: Jul 2019
Location: Calgary, Alberta
Posts: 81
Re: '54 rear bumper on a '53?

Quote:
LOVE the swept back look. I usually am not to fond of this body style chopped... NICE JOB.
Thanks Marty. My dad and I chopped it in 1981, when I was in high school. Also grafted a front frame section from a full size '68 Olds. The chop worked much better than the graft! The truck sat for decades until I could find the time and figure out what to do with my mangled frame. Finally bit the bullet and ordered an Art Morrison chassis last year. The project has really taken off since then.
Chopped53 is offline   Reply With Quote
Old 09-04-2019, 12:51 PM   #13
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
Re: '54 rear bumper on a '53?

hey chopped, that looks awesome. the upside down bumper will look great too, with some exhaust poking through. nice work on the chop with the raked windshield, it looks like it's already flying down the road when it's sitting still.
i wish my project was as far along. probbly see yours driving before mine.
dsraven is offline   Reply With Quote
Old 09-04-2019, 02:02 PM   #14
Chopped53
Registered User
 
Join Date: Jul 2019
Location: Calgary, Alberta
Posts: 81
Re: '54 rear bumper on a '53?

Quote:
Originally Posted by dsraven View Post
hey chopped, that looks awesome. the upside down bumper will look great too, with some exhaust poking through. nice work on the chop with the raked windshield, it looks like it's already flying down the road when it's sitting still.
i wish my project was as far along. probbly see yours driving before mine.
Dsraven - a fellow Canadian! How's it goin', eh? I couldn't find any pics of your project on the forum. Post a pic or tell us about your build.
Chopped53 is offline   Reply With Quote
Old 09-04-2019, 02:39 PM   #15
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
Re: '54 rear bumper on a '53?

my build is a 57 gmc on a 2004 envoy awd frame and running gear. 4.2l inline 6 with auto o/d and 3.73 gears. been building and changing the plans for about 12 years between other jobs. started with the original frame, boxed it, installed ford 8.8 rear with 4 link, also TCI MII front end with airbags all around, ls powerplant with 2wd auto . changed the plan, sold the old frame and now doing this route. just can't get enough shop time to do anything. retire in a year and half, maybe then. or send the wife on a long holiday somewhere so I can get something done without interuptions.
haha.
your truck looks great. good planning if you can stick with it till completion. I like the front window with no rail, is it one piece or glued at the seam?
Attached Images
 
dsraven is offline   Reply With Quote
Old 09-04-2019, 05:24 PM   #16
Chopped53
Registered User
 
Join Date: Jul 2019
Location: Calgary, Alberta
Posts: 81
Re: '54 rear bumper on a '53?

@dsraven - nice truck. I like the extended cab with the extra window. Good proportions and just-right stance. Keep at it. Twelve years is nothing in "truck years"! And we need more classic trucks in Calgary.

My windshield is a two-piece with a tiny gap in the middle (poor man's A/C!). Filling the gap with silicone is on the list. My whole project focus has been to "get it on the road". Now that we've done that, I can spend the winter on all the things we skipped along the way (bed, rear fenders. bumpers, hood, seats, dynamat, carpet.....and the list goes on)
Chopped53 is offline   Reply With Quote
Old 09-05-2019, 10:00 AM   #17
58pan
Registered User
 
Join Date: Mar 2018
Location: Sandpoint Idaho
Posts: 47
Re: '54 rear bumper on a '53?

Here you go. A 54 bumber on a 53. No mod's. You have a great looking truck there.
Attached Images
 
58pan is offline   Reply With Quote
Old 09-05-2019, 12:48 PM   #18
Chopped53
Registered User
 
Join Date: Jul 2019
Location: Calgary, Alberta
Posts: 81
Re: '54 rear bumper on a '53?

Quote:
Originally Posted by 58pan View Post
Here you go. A 54 bumber on a 53. No mod's. You have a great looking truck there.
Thanks. I love that little license plate bump. I don't know what that guy at Tucker's Truck Parts was talking about. Maybe he was thinking of a '55.2 frame.....?
Chopped53 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com