Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-08-2019, 11:29 AM | #1 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
A few trucks at the Poulsbo Wa car show 9/7/19
We are over here for a mini vacation that my wife planned and there was a car show in town today. Not many trucks and no AD trucks but here are the Chevy GMC trucks that were there..
There were two TF trucks both 57. The Maroon one had some tricks that I haven't seen used and the grill might be a bit controversial to some but I liked it. I think I'd like it better if the background was black so the bar floated though. Tail lights were interesting too.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-08-2019, 11:43 AM | #2 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
The Green 57 had a few tricks of it's own including tilt hood, 454 and a knock it out of the park interior. Interior was done by Clayton Wood of CoosBay Oregon according to the show board.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-08-2019, 11:56 AM | #3 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
I don't normally take photos of vehicles with clutter in front of them or hanging off them. It appeared to be a box of T shirts from his company with one hanging on the door handle.
The pretty gal tried the car on for size. It has been in the owner's family for around 40 years and was used in parades all over the PNW. Back end of the green truck from up in the park. The copper 71/ 72 was as nice a stone stock restored one of that model as you will ever find. Not one ding inside the be and it looked better than new showroom stock ever did.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-08-2019, 12:11 PM | #4 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
A couple of OT trucks. The Studebaker looked to be stock.
The 1922 Flatbed. Was bought by a family member of the guy who was showing it at an equipment auction years ago after they had been unsuccessful in buying it from the business owner before that. For far less than they had offered for it before he said. Restored years ago and left to sit in the garage after the new wore off. He drug it out and cleaned it up an took it to the show. It is the only 1922 of that brand and model left that he can find. I didn't write the name down an my photo of the radiator isn't clear enough to read. He was fun because he was having a ball telling people about the truck.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-08-2019, 12:23 PM | #5 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
For those who are brave or crazy enough. How about an under 10 ft speed boat with a 50 HP Merc on it? I didn't get the length but it is small.
The green truck was bagged with a few tricks including Fi.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-08-2019, 12:39 PM | #6 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
A couple more shots of the green truck.
The little red truck was parked in front of the famous See's Poulsbo bakery where Poulsbo bread originated an Donut mecca for the Area. The painting of the AD headed to the mountains was in a gallery down town in a town full of galleries and spendy trinkets. I didn't get a price.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-08-2019, 12:48 PM | #7 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
A local to Poulsbo area fishing boat design that was used by fishing resorts in the area years ago.
Normally we would have our boat tied up on the dock as this is one of our favorite spots to go with the boat.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-08-2019, 07:43 PM | #8 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
spendy trinkets indeed. thats an especially beautiful nash healey lemans, especially with the wire wheels. thanks for the pictures
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
09-08-2019, 09:56 PM | #9 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
That Nash Healey was something nice and the cool thing was that a high number of the spectators recognized that.
There were several "just cars' in the mix either new super cars or mid 60's mid 70's rides that were ok but for the most part had nothing special going on. I should have taken more photos of the copper and white 70/71 as that is at least a 98 point truck at national shows. I don't think there is a new truck of any brand on the showroom floor with the inside of the box as nice as the inside of the box and bed floor are on that truck. If you went by ISCA judging sheet scores it would have out scored every other restored rig out there. My wife loves coming to this town and when the 48 is done she no doubt will be checking the schedule for the show here. That painting of the AD headed for he mountains is 2500.00 and is the original by the artist who owns the gallery it was in.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-09-2019, 09:41 PM | #10 | |||
Registered User
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,200
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
Quote:
Quote:
Quote:
|
|||
09-11-2019, 02:58 AM | #11 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: A few trucks at the Poulsbo Wa car show 9/7/19
That gives the guys who actually know what they are looking at more time to visit with the gent. A quick look at the dash of the 427 Cobra tells the tale with the Smiths gauges.
The show is an open show even though it lists it's self as a classic car show. Everything from a very Early Brush electric car that drew a lot of attention to a late model Challenger hemi with those gawd awful lights that go around the headlights in circles changing colors. I probably didn't take photos of half the cars entered simply they didn't appeal to me or weren't special enough to get that much of my attention. On the other hand there were some rare and some really interesting cars including an electric powered Porsche 911. I had about the Porsche during a discussion of electric conversions. He uses it as a daily driver and has a range of about 65 miles on a charge. He said he has put about 30K on it and it adds about 8.00 a month to his electri bill to charge it.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
Bookmarks |
|
|