![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Steering Column Bracket and Wire
Hey gang,
I have two questions as I reassemble my column/dash. First are these brackets and the gap below the column correct? Seems off to me but I'm not sure how to correct it. Second - the bundle of wires coming out of the column - there's 8 in the ribbon but i also have a tan/gray wire with a connector on the end. i *think* this goes on the back of the cluster but can anyone confirm? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: Steering Column Bracket and Wire
Nobody?
I did find this pic that seems to have the same gap, if not a little smaller. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2006
Location: LaSalle Mi
Posts: 531
|
Re: Steering Column Bracket and Wire
My truck is a bit of a turd, but same gap.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: Steering Column Bracket and Wire
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2017
Location: Escondido
Posts: 305
|
Re: Steering Column Bracket and Wire
Gap here as well; bone stock rig. Had to post-I hate odd numbers!
__________________
-Bruce 1971 K5 Blazer 4WD ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: Steering Column Bracket and Wire
To close the loop on my other question - the extra wire from the tilt column supplies power to the shift indicator. Non-tilts use the fiber optic cable.
On a normal wiring harness this would plug into the fuse panel. On my American Auto Wire harness I need to wire it into the cluster plug grey wire, doubled up with the stock grey dash lights wire. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,539
|
Re: Steering Column Bracket and Wire
I took that bracket right off on mine because it looked like crap right from the factory.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2009
Location: Las Cruces New Mexico
Posts: 219
|
Re: Steering Column Bracket and Wire
Mine is off a 70 blazer. The fit is much better than yours is
__________________
Justin 1970 Blazer in progress |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,382
|
Re: Steering Column Bracket and Wire
Interesting. And you have the U bolt in place holding the column to the dash?
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jan 2009
Location: Las Cruces New Mexico
Posts: 219
|
Re: Steering Column Bracket and Wire
Everything there is stock and not touched to my knowledge
__________________
Justin 1970 Blazer in progress |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2009
Location: Las Cruces New Mexico
Posts: 219
|
Re: Steering Column Bracket and Wire
If you look at post #3 it looks like the bracket used to be up and covering everything. Somewhere along the way it got pulled down
__________________
Justin 1970 Blazer in progress |
![]() |
![]() |
![]() |
Bookmarks |
|
|