WI WTB (One) 8 bolt 16.5x9.75 Steel wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Njeiv** · 07-11-2019, 09:15 PM

WTB Chevy 8 bolt 16.5x9.75 Steel wheel With nubs and 5-1/2” backset.
I have a nice set of 4 but am looking for one for my spare tire.
I’d take a pair if not willing to sell a single.

**too much stuff** · 07-12-2019, 09:27 PM

Bump for ya... Did you find anything at iola? Slim pickins from what I saw.

**Njeiv** · 07-12-2019, 10:04 PM

Thanks Eric, wasn’t too impressed with the pickings as a far as 67-72 stuff goes, picked up a couple little things that I could have done without! But had a good time overall.

**Njeiv** · 07-14-2019, 08:41 AM

Sunday bump

**Njeiv** · 07-20-2019, 11:46 PM

Bump

**Njeiv** · 08-06-2019, 11:18 PM

Surely Someone has 1 or 2 of these things laying around...

**Njeiv** · 08-13-2019, 11:30 AM

Ttt

2006gmcdmax · 08-14-2019, 08:25 PM

I have a set of 4 of them. PM me please.

**FirstOwner69** · 08-15-2019, 09:42 PM

I may have a pair, but I'm not quite sure how to measure. I think they are the desired width and backset. They have 12X16.5 bias ply tires on them.

**Njeiv** · 08-15-2019, 09:58 PM

Great! To measure lay a straightedge across the back side of the rim and measure down to the inside mounting flange (the area that touches the hub)
Let me know what you come up with!
Thanks, Nic

**FirstOwner69** · 08-15-2019, 11:43 PM

A bit difficult to measure with the tires mounted. Backset appears to be only 5.0". Width looks like 9.75" inside of bead. These were purchased from Dick Cepek in 1970 or 1971 to provide better stability and wear with the camper on.

Here's a picture of one on the truck in 2010 just before the restoration.

Jim

**Njeiv** · 08-16-2019, 03:05 AM

Quote:

Originally Posted by FirstOwner69

A bit difficult to measure with the tires mounted. Backset appears to be only 5.0". Width looks like 9.75" inside of bead. These were purchased from Dick Cepek in 1970 or 1971 to provide better stability and wear with the camper on.

Here's a picture of one on the truck in 2010 just before the restoration.

Jim

Could you cut a small piece of wood or something flat to fit on the rim without hitting the tire so you can get an accurate measurement?

**FirstOwner69** · 08-16-2019, 01:44 PM

That's what I did with the backset. It's the width that is more difficult without removing the tire, but I'm pretty confident in the width measurement also.

**Njeiv** · 08-16-2019, 05:44 PM

Thanks for checking, I’m really looking for that 5.5” back set.
Somebody has to have one.
The search continues!

**Njeiv** · 08-20-2019, 06:06 PM

Ttt

*randy500* · 08-20-2019, 06:39 PM

I saw a pair in the junk yard yesterday, what are they worth?

**Njeiv** · 08-20-2019, 07:48 PM

Quote:

Originally Posted by randy500

I saw a pair in the junk yard yesterday, what are they worth?

100 bucks ea. If they’re nice, If they would sell you just one, I would prefer that. but if I need to buy two I would.

*randy500* · 08-20-2019, 07:55 PM

They are on a truck and have air in them, Not sure of how clean, surface rust but not sure if they will be pitted or not.
People at the junk yard are real jerks, unbelievable jerks actually.
Is there more than one style of wheel and can you post a pic of exactly what your looking for? I see that firstowners wheels have a bump in the deep outer hoop part, these did not have that. They are on the rear of an early square body truck.

**Njeiv** · 08-20-2019, 08:52 PM

Quote:

Originally Posted by randy500

They are on a truck and have air in them, Not sure of how clean, surface rust but not sure if they will be pitted or not.
People at the junk yard are real jerks, unbelievable jerks actually.
Is there more than one style of wheel and can you post a pic of exactly what your looking for? I see that firstowners wheels have a bump in the deep outer hoop part, these did not have that. They are on the rear of an early square body truck.

Uploading photos

**Njeiv** · 08-20-2019, 08:54 PM

Quote:

Originally Posted by Njeiv

Uploading photos

1 more

**Njeiv** · 08-20-2019, 09:00 PM

Quote:

Originally Posted by Njeiv

Uploading photos

2 more

*randy500* · 08-20-2019, 09:04 PM

Ok i think there he same, i will try to get out there.

**Njeiv** · 08-20-2019, 09:09 PM

Quote:

Originally Posted by randy500

Ok i think there he same, i will try to get out there.

Sorry for the upside down picture of the backset measurement, I tried loading it both ways and it won’t come through correctly. I just wanted to show you how I measured the backset.

**Njeiv** · 09-11-2019, 08:13 AM

Ttt

**Njeiv** · 09-24-2019, 02:49 PM

Ttt

07-11-2019, 09:15 PM	#1
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	WTB (One) 8 bolt 16.5x9.75 Steel wheel WTB Chevy 8 bolt 16.5x9.75 Steel wheel With nubs and 5-1/2” backset. I have a nice set of 4 but am looking for one for my spare tire. I’d take a pair if not willing to sell a single. __________________ Last edited by Njeiv; 07-14-2019 at 08:40 AM. Reason: Changed description

07-12-2019, 09:27 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Bump for ya... Did you find anything at iola? Slim pickins from what I saw. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-12-2019, 10:04 PM	#3
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Thanks Eric, wasn’t too impressed with the pickings as a far as 67-72 stuff goes, picked up a couple little things that I could have done without! But had a good time overall. __________________

07-14-2019, 08:41 AM	#4
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Sunday bump __________________

07-20-2019, 11:46 PM	#5
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Bump __________________

08-06-2019, 11:18 PM	#6
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Surely Someone has 1 or 2 of these things laying around... __________________

08-13-2019, 11:30 AM	#7
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Ttt __________________

08-14-2019, 08:25 PM	#8
2006gmcdmax Registered User Join Date: Oct 2014 Location: St. Paul Minnesota Posts: 195	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel I have a set of 4 of them. PM me please.

08-15-2019, 09:42 PM	#9
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,853	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel I may have a pair, but I'm not quite sure how to measure. I think they are the desired width and backset. They have 12X16.5 bias ply tires on them. Attached Images

08-15-2019, 09:58 PM	#10
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Great! To measure lay a straightedge across the back side of the rim and measure down to the inside mounting flange (the area that touches the hub) Let me know what you come up with! Thanks, Nic __________________

08-15-2019, 11:43 PM	#11
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,853	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel A bit difficult to measure with the tires mounted. Backset appears to be only 5.0". Width looks like 9.75" inside of bead. These were purchased from Dick Cepek in 1970 or 1971 to provide better stability and wear with the camper on. Here's a picture of one on the truck in 2010 just before the restoration. Jim Attached Images

08-16-2019, 01:44 PM	#13
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,853	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel That's what I did with the backset. It's the width that is more difficult without removing the tire, but I'm pretty confident in the width measurement also.

08-16-2019, 05:44 PM	#14
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Thanks for checking, I’m really looking for that 5.5” back set. Somebody has to have one. The search continues! __________________

08-20-2019, 06:06 PM	#15
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Ttt __________________

08-20-2019, 06:39 PM	#16
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel I saw a pair in the junk yard yesterday, what are they worth?



Register or Log In To remove these advertisements.

08-20-2019, 07:55 PM	#18
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel They are on a truck and have air in them, Not sure of how clean, surface rust but not sure if they will be pitted or not. People at the junk yard are real jerks, unbelievable jerks actually. Is there more than one style of wheel and can you post a pic of exactly what your looking for? I see that firstowners wheels have a bump in the deep outer hoop part, these did not have that. They are on the rear of an early square body truck.

08-20-2019, 09:04 PM	#22
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Ok i think there he same, i will try to get out there.

09-11-2019, 08:13 AM	#24
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Ttt __________________

09-24-2019, 02:49 PM	#25
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: WTB (One) 8 bolt 16.5x9.75 Steel wheel Ttt __________________

Register or Log In To remove these advertisements.