|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-23-2019, 07:35 PM
|
#1 |
|
Registered User
 Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
66 C10 Holley 750 Throttle Cable Connection
I have a Holley 750 while using 67/72 throttle cable and pedal.
Looking how to finish the connection between the 2 Photo attached |
|
|
|
09-23-2019, 08:19 PM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,732
|
Re: 66 C10 Holley 750 Throttle Cable Connection
|
|
|
|
|
09-24-2019, 01:46 PM
|
#3 |
|
Senior Member
  
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: 66 C10 Holley 750 Throttle Cable Connection
Connect it with an e clip to that post that has a groove in it is how I connected mine. I'm using a squarebody pedal, but same general idea and cable type
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
09-24-2019, 03:05 PM
|
#4 | |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,732
|
Re: 66 C10 Holley 750 Throttle Cable Connection
Quote:
It moves independently from the throttle lever. |
|
|
|
|
|
09-25-2019, 12:12 AM
|
#5 | |
|
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: 66 C10 Holley 750 Throttle Cable Connection
Quote:
 Sorry about that, I've never worked with a Holley before
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
|
09-25-2019, 06:00 PM
|
#6 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: 66 C10 Holley 750 Throttle Cable Connection
here is mine. I used original linkage.
|
|
|
|
|
09-27-2019, 07:34 PM
|
#7 |
|
Registered User
Join Date: Jun 2010
Location: gadsden, alabama
Posts: 468
|
Re: 66 C10 Holley 750 Throttle Cable Connection
i used these https://www.speedwaymotors.com/Speed...hings,613.html and a 1/4 inch bolt and lock nut hope this helps
__________________
Due to financial constraints, the light at the end of the tunnel will be shut off until further notice |
|
|
|
|
09-29-2019, 06:51 PM
|
#8 | |
|
Registered User
Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
Re: 66 C10 Holley 750 Throttle Cable Connection
Quote:
Got the bracket Fits great What should i use to connect the cable to the bracket so it pivots correctly without binding? |
|
|
|
|
|
09-29-2019, 09:48 PM
|
#9 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,732
|
Re: 66 C10 Holley 750 Throttle Cable Connection
Likely like bama did with a bolt and jam nut.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
