Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-12-2020, 06:58 PM | #1 |
Registered User
Join Date: Mar 2012
Location: Huntsville, AL
Posts: 1,000
|
How are you guys routing your rear brake lines after converting to disc?
I have captain fabs brackets installed for the D52 calipers and everything on, just not sure how to route the flex line. Are you guys going over the leaf springs or under? I don’t have a flip kit so my springs still sit on top of the axle. Any pictures or feedback would be great. Thanks!
|
01-13-2020, 07:28 PM | #2 |
Registered User
Join Date: Mar 2012
Location: Huntsville, AL
Posts: 1,000
|
Re: How are you guys routing your rear brake lines after converting to disc?
So this is what I have currently mocked up. Thoughts? The loop down wasn’t ideal but the shock mount and leaf spring perch seem to force me further towards the differential.
|
01-13-2020, 08:24 PM | #3 |
Registered User
Join Date: Oct 2013
Location: Maine
Posts: 2,376
|
Re: How are you guys routing your rear brake lines after converting to disc?
My Caddy with rear discs uses a pretty short rubber brake hose, like 6 inches. I wouldn't want too much hose flapping around
__________________
76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10 |
01-13-2020, 09:53 PM | #4 |
Registered User
Join Date: Mar 2012
Location: Huntsville, AL
Posts: 1,000
|
Re: How are you guys routing your rear brake lines after converting to disc?
Yea I think I am going to aim for a much shorter routing.
|
01-17-2020, 08:42 AM | #5 |
Registered User
Join Date: Nov 2015
Location: Downers Grove IL
Posts: 37
|
Re: How are you guys routing your rear brake lines after converting to disc?
I used a shorter flex line and made the connection to the hard line just inside the shock mount. I have my axle flipped. You don't want the flex line hanging very lose.
|
01-17-2020, 11:42 PM | #6 |
Registered User
Join Date: Mar 2012
Location: Huntsville, AL
Posts: 1,000
|
Re: How are you guys routing your rear brake lines after converting to disc?
Here is what I settled on. Feel pretty good about it.
|
01-18-2020, 07:57 AM | #7 |
Registered User
Join Date: Oct 2013
Location: Maine
Posts: 2,376
|
Re: How are you guys routing your rear brake lines after converting to disc?
Looking much better. I drive through gnarly bushes and rocks so I would be trying to loop that to the upside.
__________________
76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10 |
01-18-2020, 09:08 PM | #8 |
Registered User
Join Date: Aug 2003
Location: Nashport, OH
Posts: 549
|
Re: How are you guys routing your rear brake lines after converting to disc?
I welded some tabs on.
|
Bookmarks |
|
|