Looking for this part..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69GMC910 · 02-08-2020, 11:11 PM

I cant find these anywhere. It is like a button that holds the cowl panel to the cab on the outside edges of the cowl panel. Does anyone know a GM part number, or where I can get these? Mine are broken, but I’ll attach a few pics for reference.

Pontiac1976 · 02-15-2020, 01:05 PM

I think Classic Parts or LMC use to have them. If not try recycling/scrap yard.

69GMC910 · 02-15-2020, 03:12 PM

LMC doesnt appear to carry them, I will check classic parts.

Anybody know the GM part number for this piece? Would really help with cross referencing.

TIA!

rustprimer · 02-19-2020, 12:36 PM

Have you tried rpmparts.ca in Saskatchewan or billstruckshop.com in Ontario.

Joe

02-08-2020, 11:11 PM	#1
69GMC910 MOTORHEAD! Join Date: May 2000 Location: Devon AB, Canada Posts: 849	Looking for this part..... I cant find these anywhere. It is like a button that holds the cowl panel to the cab on the outside edges of the cowl panel. Does anyone know a GM part number, or where I can get these? Mine are broken, but I’ll attach a few pics for reference. Attached Images __________________ 82 GMC High Sierra VortecPro 496 12 Bolt, 3.42's AFR 265 Holley 850 Performer RPM Air Gap Hooker 2455's TCI Turbo 400 Super Street Fighter TRRC 12 Bolt Eaton Posi Mark Williams Axles Cal-Tracs Hoosier 30x10.5 Radial Slick Full weight long box pickup Current best- 11.33@117mph

02-15-2020, 01:05 PM	#2
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 766	Re: Looking for this part..... I think Classic Parts or LMC use to have them. If not try recycling/scrap yard. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

02-15-2020, 03:12 PM	#3
69GMC910 MOTORHEAD! Join Date: May 2000 Location: Devon AB, Canada Posts: 849	Re: Looking for this part..... LMC doesnt appear to carry them, I will check classic parts. Anybody know the GM part number for this piece? Would really help with cross referencing. TIA! __________________ 82 GMC High Sierra VortecPro 496 12 Bolt, 3.42's AFR 265 Holley 850 Performer RPM Air Gap Hooker 2455's TCI Turbo 400 Super Street Fighter TRRC 12 Bolt Eaton Posi Mark Williams Axles Cal-Tracs Hoosier 30x10.5 Radial Slick Full weight long box pickup Current best- 11.33@117mph

02-19-2020, 12:36 PM	#4
rustprimer Registered User Join Date: Mar 2017 Location: Barrie, Ontario Posts: 16	Re: Looking for this part..... Have you tried rpmparts.ca in Saskatchewan or billstruckshop.com in Ontario. Joe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.