47-55.1 Oil Filter Location? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dachshund · 03-02-2020, 01:45 PM

Looking into getting a spin-on type oil filter for my 47 (53/54 235...). My question is, where do you recommend placing it? I am also planning headers....Also, where is a good place to get one (part number?)?
Thanks

**mr48chev** · 03-02-2020, 07:36 PM

A remote filter mount that goes on the firewall or inner fender that usually takes a Ford style filter is about all you need plus the correct hoses and fittings to hook it up.

Some examples here https://www.summitracing.com/parts/t...BoCdscQAvD_BwE

You can usually get the trans dapt ones from O'Reilly's and not have to pay shipping.

There are some fancier ones around if you want to spend more money.

dsraven · 03-03-2020, 06:49 PM

sometimes available at a hydraulic shop as well, or farm supply, for less cashola. a hydraulic shop could fab the hoses and supply the fittings needed for you at the same time.

Jemezcrusher · 03-03-2020, 11:04 PM

DO a google search on oil filter for 235 Deve has some good stuff. Not cheap, but you need to make sure you use the right sized orifices to keep the pressure up.

He has a set up for Fenton headers. I have headers and rack and pinion and will see if I can get his system to work.

Looks cool. Check out his site

jwhotrod · 03-12-2020, 12:59 PM

I screwed around with the trans adapt and a few other die cast remote filter mounts and finally bought one from Canton racing (billet aluminum) that was the only one that was machined correctly and didn't have porosity leaks or something.
haven't had problems since. they will also set it up so it either takes a
gm or ford filter.
diameter of the screw on center post.

03-02-2020, 01:45 PM	#1
Dachshund Registered User Join Date: Oct 2018 Location: Trenton MO Posts: 201	Oil Filter Location? Looking into getting a spin-on type oil filter for my 47 (53/54 235...). My question is, where do you recommend placing it? I am also planning headers....Also, where is a good place to get one (part number?)? Thanks

03-02-2020, 07:36 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Oil Filter Location? A remote filter mount that goes on the firewall or inner fender that usually takes a Ford style filter is about all you need plus the correct hoses and fittings to hook it up. Some examples here https://www.summitracing.com/parts/t...BoCdscQAvD_BwE You can usually get the trans dapt ones from O'Reilly's and not have to pay shipping. There are some fancier ones around if you want to spend more money. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-03-2020, 06:49 PM	#3
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,333	Re: Oil Filter Location? sometimes available at a hydraulic shop as well, or farm supply, for less cashola. a hydraulic shop could fab the hoses and supply the fittings needed for you at the same time.

03-03-2020, 11:04 PM	#4
Jemezcrusher Registered User Join Date: Nov 2015 Location: Jemez Springs, NM Posts: 435	Re: Oil Filter Location? DO a google search on oil filter for 235 Deve has some good stuff. Not cheap, but you need to make sure you use the right sized orifices to keep the pressure up. He has a set up for Fenton headers. I have headers and rack and pinion and will see if I can get his system to work. Looks cool. Check out his site

03-12-2020, 12:59 PM	#5
jwhotrod Registered User Join Date: Oct 2018 Location: DeKalb, IL Posts: 159	Re: Oil Filter Location? I screwed around with the trans adapt and a few other die cast remote filter mounts and finally bought one from Canton racing (billet aluminum) that was the only one that was machined correctly and didn't have porosity leaks or something. haven't had problems since. they will also set it up so it either takes a gm or ford filter. diameter of the screw on center post.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.