new truck and parts avalable - The 1947 - Present Chevrolet & GMC Truck Message Board Network

special70gmc · 06-19-2004, 09:26 PM

ok i bought this truck the other day for 500 it came as you see it but in peices, it also came with a complete cab and 12 ton axels with 3.73 gears reason being that i put the 1 ton axles under this one.

the people on the board say i have an np 203 t case but with the new dana 44 i put in the front i have locking hubs so does that mean if i unlock the hubs i can cruise in 4 hi as if i was in 2wd? also where can i pick up some front calipers, rear shues+spring kit for my dana 44/14 bolt FF?

o yeak i put a 6inch suspention 3inch body lift under it i think some 36x12.5x16.5 super swamper TSL's are coming soon, just for a reference there are 36's on it in the pic

-thanks -kyle

special70gmc · 06-19-2004, 09:28 PM

last pics

1974ChevyC10 · 06-19-2004, 10:57 PM

cool truck-is that steering wheel in the cab that came separate out of a 70's model camaro-if so do you want to get rid of it-i want one of those for my 78.lemme know

Paso76GMCstepper · 06-20-2004, 12:25 AM

Very nice truck You have the same valve covers I do. Yes you put the transfer case in 2Hi and then only the rear wheels work. If you engage the transfer case to 4hi or 4low the ransfer case will try to turn the front end Nothing will work unless you lock in the front end. You will also do damage to your transfer case with the truck in 4hi or 4low without the hubs locked. Hers some pics of my 76 GMC stepside under restoration

GMC1tondually4dr · 06-20-2004, 03:27 AM

Special70GMC

$500.....and it runs.....you stole it.

I'm not into 4X4 stuff, just wondering, are all 4X4 driveshafts coming out of the front transfer case? that severe of an angle?

It's not that important, I'm just curious and snoopy

You still got a good deal

78' Silverado · 06-20-2004, 02:00 PM

no lol, But the 6inch susp/3inch body lift do make that happen!! Gotta love it@

*1FaastC10* · 06-20-2004, 06:50 PM

Quote:

Originally Posted by 78' Silverado

no lol, But the 6inch susp/3inch body lift do make that happen!! Gotta love it@

that's actually the rear shaft, and it doesnt appear to be hooked to anything on the other end. if so, its got serious issues and way more than 6" of lift.

to answer the question about the locking hubs and the 203, you can buy a kit for the 203 to convert it to part time.

Paso76GMCstepper · 06-20-2004, 06:52 PM

I also was leaning towards it being unhooked too.

06-19-2004, 09:26 PM	#1
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	new truck and parts avalable ok i bought this truck the other day for 500 it came as you see it but in peices, it also came with a complete cab and 12 ton axels with 3.73 gears reason being that i put the 1 ton axles under this one. the people on the board say i have an np 203 t case but with the new dana 44 i put in the front i have locking hubs so does that mean if i unlock the hubs i can cruise in 4 hi as if i was in 2wd? also where can i pick up some front calipers, rear shues+spring kit for my dana 44/14 bolt FF? o yeak i put a 6inch suspention 3inch body lift under it i think some 36x12.5x16.5 super swamper TSL's are coming soon, just for a reference there are 36's on it in the pic -thanks -kyle Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

06-19-2004, 09:28 PM	#2
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	last pics Attached Images __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

06-19-2004, 10:57 PM	#3
1974ChevyC10 Overworked and Underlaid Join Date: May 2002 Location: Flagstaff,Arizona Posts: 1,279	cool truck-is that steering wheel in the cab that came separate out of a 70's model camaro-if so do you want to get rid of it-i want one of those for my 78.lemme know __________________ I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP

06-20-2004, 12:25 AM	#4
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	Very nice truck You have the same valve covers I do. Yes you put the transfer case in 2Hi and then only the rear wheels work. If you engage the transfer case to 4hi or 4low the ransfer case will try to turn the front end Nothing will work unless you lock in the front end. You will also do damage to your transfer case with the truck in 4hi or 4low without the hubs locked. Hers some pics of my 76 GMC stepside under restoration Attached Images Last edited by Paso76GMCstepper; 06-20-2004 at 12:29 AM.

06-20-2004, 02:00 PM	#6
78' Silverado \/ My Loves \/ Join Date: Mar 2003 Location: Midland,Texas Posts: 462	no lol, But the 6inch susp/3inch body lift do make that happen!! Gotta love it@ __________________ 78' Silverado - Blue - (In a Coma) 04' Silverado -Red- 383 Stroker in progress for the 78'!!!

06-20-2004, 03:27 AM	#5
GMC1tondually4dr Registered User Join Date: Jun 2004 Location: Rosemount, MN Posts: 341	Special70GMC $500.....and it runs.....you stole it. I'm not into 4X4 stuff, just wondering, are all 4X4 driveshafts coming out of the front transfer case? that severe of an angle? It's not that important, I'm just curious and snoopy You still got a good deal

06-20-2004, 06:52 PM	#8
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	I also was leaning towards it being unhooked too.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.