Help me ID/Source these random door parts please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fishmunger · 03-30-2020, 10:38 AM

Anyone know if there are aftermarket replacements and proper names for

1) the dome light door switch
2) the square 1/4” nut that goes behind the armrest
3) and this little rubber cushion that supports the inner door panel

And would someone mind telling me if my rear diff is ‘open’? I believe it is, but my spider says I have Posi, though the gears have been changed....

Thanks gang

GASoline71 · 03-30-2020, 12:48 PM

Quote:

Originally Posted by fishmunger

but my spider says I have Posi...

Your spider is wrong my friend. That is an open diff.

Gary

**specialtyretail** · 03-30-2020, 02:28 PM

Napa # DJ6402.

**LockDoc** · 03-31-2020, 12:51 AM

-
If you have an ACE hardware near you go there and look for "cage nuts" for the arm rest parts. They will be in the slide out fastener boxes.

LockDoc

fishmunger · 03-31-2020, 01:42 AM

Hahaha My SPID!

**HO455** · 03-31-2020, 10:38 PM

The door switch and the bumper are commonly available. Classic Industries is where I got mine at.

toolboxchev · 03-31-2020, 10:55 PM

Contact GMCPauls for the electrical. It is made by the same company that is the remants of DELCO before GM bought and sold them.

For some odd reason, I will only be dealing with GMC Pauls in the future on lots of things.

fishmunger · 04-01-2020, 11:00 AM

Thanks for the tips guys!

Do you think any vendors stock that cage nut? Trying not to venture out into corona land any more than I have to...

fishmunger · 04-09-2020, 03:14 PM

I'm bumping this thread because I have searched high and low for this interior door panel bumper/support rubber thing (3rd pic down), emailed all the vendors, no one has ever heard of it? I wish I knew the name/where to get one.

**LockDoc** · 04-09-2020, 09:22 PM

Quote:

Originally Posted by fishmunger

I'm bumping this thread because I have searched high and low for this interior door panel bumper/support rubber thing (3rd pic down), emailed all the vendors, no one has ever heard of it? I wish I knew the name/where to get one.

What year is your truck and where exactly does the small rubber bumper go? I don't remember seeing anything like that on these trucks.

LockDoc

fishmunger · 04-09-2020, 10:26 PM

Lockdoc,

It's a 1972, and it was just under the inside edge of the plastic door panel at the bottom, near where the white plastic thingamajigs click into place. It seemed to serve as a vibration bumper against the plastic panel.

If no one's seen it, I suppose it could be aftermarket? Sure looked factory though.

**LockDoc** · 04-10-2020, 10:12 AM

Quote:

Originally Posted by fishmunger

Lockdoc,

It's a 1972, and it was just under the inside edge of the plastic door panel at the bottom, near where the white plastic thingamajigs click into place. It seemed to serve as a vibration bumper against the plastic panel.

If no one's seen it, I suppose it could be aftermarket? Sure looked factory though.

I have quite a few '72 door panels. I will check them when I go out and see if any of them have anything like that.

LockDoc

fishmunger · 04-10-2020, 10:35 AM

Thanks LockDoc. The cushion was screwed to the door itself, the panel just rested on top of it...?

**LockDoc** · 04-10-2020, 08:13 PM

Quote:

Originally Posted by fishmunger

Thanks LockDoc. The cushion was screwed to the door itself, the panel just rested on top of it...?

OK, I don't have any '72 doors left except the ones on the '72 Dually work truck. I'm wondering if someone added those for some reason.

LockDoc

fishmunger · 04-10-2020, 10:21 PM

bottom right corner

03-30-2020, 10:38 AM	#1
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	Help me ID/Source these random door parts please Anyone know if there are aftermarket replacements and proper names for 1) the dome light door switch 2) the square 1/4” nut that goes behind the armrest 3) and this little rubber cushion that supports the inner door panel And would someone mind telling me if my rear diff is ‘open’? I believe it is, but my spider says I have Posi, though the gears have been changed.... Thanks gang Attached Images

03-30-2020, 02:28 PM	#3
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Help me ID/Source these random door parts please Napa # DJ6402. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

03-31-2020, 12:51 AM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,891	Re: Help me ID/Source these random door parts please - If you have an ACE hardware near you go there and look for "cage nuts" for the arm rest parts. They will be in the slide out fastener boxes. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-31-2020, 01:42 AM	#5
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	Re: Help me ID/Source these random door parts please Hahaha My SPID!

03-31-2020, 10:38 PM	#6
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,469	Re: Help me ID/Source these random door parts please The door switch and the bumper are commonly available. Classic Industries is where I got mine at. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

03-31-2020, 10:55 PM	#7
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Help me ID/Source these random door parts please Contact GMCPauls for the electrical. It is made by the same company that is the remants of DELCO before GM bought and sold them. For some odd reason, I will only be dealing with GMC Pauls in the future on lots of things.

04-01-2020, 11:00 AM	#8
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	Re: Help me ID/Source these random door parts please Thanks for the tips guys! Do you think any vendors stock that cage nut? Trying not to venture out into corona land any more than I have to...

04-09-2020, 03:14 PM	#9
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	Re: Help me ID/Source these random door parts please I'm bumping this thread because I have searched high and low for this interior door panel bumper/support rubber thing (3rd pic down), emailed all the vendors, no one has ever heard of it? I wish I knew the name/where to get one.

04-09-2020, 10:26 PM	#11
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	Re: Help me ID/Source these random door parts please Lockdoc, It's a 1972, and it was just under the inside edge of the plastic door panel at the bottom, near where the white plastic thingamajigs click into place. It seemed to serve as a vibration bumper against the plastic panel. If no one's seen it, I suppose it could be aftermarket? Sure looked factory though.

04-10-2020, 10:35 AM	#13
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	Re: Help me ID/Source these random door parts please Thanks LockDoc. The cushion was screwed to the door itself, the panel just rested on top of it...?

04-10-2020, 10:21 PM	#15
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	Re: Help me ID/Source these random door parts please bottom right corner Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.