PA 1970 292 4wd engine part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ShortbedClayton** · 03-16-2020, 08:49 PM

Parting out 1970 292 4wd engine.

Valve cover: 40$
Push rod cover plates: 30$
Two piece thermostat housing(top aluminum cast piece broken): 30$
Alternator and brackets: 40$
Fan assembly and water pump pully: 40$
Fuel line from pump to carb: 15$
4speed Z bar engine bracket: 20$

See anything else just ask... will sell whole engine for 250 local pickup only. Engine is not froze up turns over freely.

4wd engine crossmember 292 only: 200$
Motor mounts and stands LH and RH: 60$
Also have a 6cyl offset aircleaner setup for sale. Not perfect but 90% complete for 100$

All Prices are plus shipping. PayPal or MO. Thanks
Posted via Mobile Device

**DeadheadNM** · 03-16-2020, 10:12 PM

How much for the tow hooks?

**1rippen6** · 03-16-2020, 11:24 PM

Quote:

Originally Posted by DeadheadNM

How much for the tow hooks?

It took me like 6 tries to find a tow hook, what an eye you have!!

**ShortbedClayton** · 03-17-2020, 03:23 AM

Quote:

Originally Posted by DeadheadNM

How much for the tow hooks?

Gonna keep them. Good eye! Tried to hide em in pics
Posted via Mobile Device

**DeadheadNM** · 03-17-2020, 06:04 AM

I figured you’d want those - nice find and good luck with the sales.

**ShortbedClayton** · 03-17-2020, 07:07 AM

Quote:

Originally Posted by DeadheadNM

I figured you’d want those - nice find and good luck with the sales.

Thank you. Didn’t realize they were on there till I was losing on the trailer..
Posted via Mobile Device

projectking · 03-17-2020, 07:54 AM

I’ll take the fuel line

**ShortbedClayton** · 03-17-2020, 08:59 AM

Quote:

Originally Posted by projectking

I’ll take the fuel line

It’s yours. Bulky piece but I’ll make box as small as possible to get shipping as low as I can. PM me your info so I can get a shipping cost and total for ya
Posted via Mobile Device

projectking · 03-17-2020, 09:37 AM

Quote:

Originally Posted by ShortbedClayton

It’s yours. Bulky piece but I’ll make box as small as possible to get shipping as low as I can. PM me your info so I can get a shipping cost and total for ya
Posted via Mobile Device

Yeah, I after thinking about that I’d be better off bending one up. Thanks anyways.

**ShortbedClayton** · 03-17-2020, 09:40 AM

No problem.
Posted via Mobile Device

**old51sedan** · 03-17-2020, 11:26 AM

How about the 3 grove harmonic balancer?

**ShortbedClayton** · 03-17-2020, 11:30 AM

Quote:

Originally Posted by old51sedan

How about the 3 grove harmonic balancer?

If I can get off with out damage I’d gladly sell. Don’t know the rarity of this 6 cylinder stuff but how bout 65$
Posted via Mobile Device

**old51sedan** · 03-17-2020, 11:38 AM

will send a PM

**ShortbedClayton** · 03-17-2020, 12:45 PM

Quote:

Originally Posted by old51sedan

will send a PM

Ok
Posted via Mobile Device

projectking · 03-17-2020, 01:17 PM

Contur is looming for an oil bath air cleaner

countr · 03-17-2020, 01:27 PM

Do you have pics. of the air cleaner set up?

Thanks Russ

**ShortbedClayton** · 03-17-2020, 01:34 PM

Quote:

Originally Posted by countr

Do you have pics. of the air cleaner set up?

Thanks Russ

I do. Little piece on snout is broken off but I can tack weld back on if you want me too..
Posted via Mobile Device

countr · 03-17-2020, 02:58 PM

Quote:

Originally Posted by ShortbedClayton

I do. Little piece on snout is broken off but I can tack weld back on if you want me too..
Posted via Mobile Device

Would you sell just the extension tube and the two brackets/post?

Thanks Russ

**ShortbedClayton** · 03-17-2020, 03:27 PM

Quote:

Originally Posted by countr

Would you sell just the extension tube and the two brackets/post?

Thanks Russ

No becuse rest is kinda useless if not complete. Make me an offer on the whole thing
Posted via Mobile Device

countr · 03-17-2020, 05:39 PM

Quote:

Originally Posted by ShortbedClayton

No becuse rest is kinda useless if not complete. Make me an offer on the whole thing
Posted via Mobile Device

I agree, I don't need the complete set up so I will pass.

Thanks Russ

**ShortbedClayton** · 03-23-2020, 07:23 AM

I guess nobody needs 6 cylinder parts... TTT feel free to make reasonable offers on the motor pieces... firm on the crossmember and mounts
Posted via Mobile Device

**ShortbedClayton** · 04-29-2020, 09:29 PM

Bump
Posted via Mobile Device

03-16-2020, 08:49 PM	#1
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 710	1970 292 4wd engine part out Parting out 1970 292 4wd engine. Valve cover: 40$ Push rod cover plates: 30$ Two piece thermostat housing(top aluminum cast piece broken): 30$ Alternator and brackets: 40$ Fan assembly and water pump pully: 40$ Fuel line from pump to carb: 15$ 4speed Z bar engine bracket: 20$ See anything else just ask... will sell whole engine for 250 local pickup only. Engine is not froze up turns over freely. 4wd engine crossmember 292 only: 200$ Motor mounts and stands LH and RH: 60$ Also have a 6cyl offset aircleaner setup for sale. Not perfect but 90% complete for 100$ All Prices are plus shipping. PayPal or MO. Thanks Posted via Mobile Device Attached Images Last edited by ShortbedClayton; 03-17-2020 at 11:27 AM.

03-16-2020, 10:12 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,481	Re: 1970 292 4wd engine part out How much for the tow hooks? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-17-2020, 06:04 AM	#5
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,481	Re: 1970 292 4wd engine part out I figured you’d want those - nice find and good luck with the sales. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-17-2020, 07:54 AM	#7
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: 1970 292 4wd engine part out I’ll take the fuel line __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

03-17-2020, 09:40 AM	#10
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 710	Re: 1970 292 4wd engine part out No problem. Posted via Mobile Device

03-17-2020, 11:26 AM	#11
old51sedan Senior Member Join Date: Oct 2015 Location: Williamston, Mi Posts: 906	Re: 1970 292 4wd engine part out How about the 3 grove harmonic balancer?

03-17-2020, 11:38 AM	#13
old51sedan Senior Member Join Date: Oct 2015 Location: Williamston, Mi Posts: 906	Re: 1970 292 4wd engine part out will send a PM

03-17-2020, 01:17 PM	#15
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: 1970 292 4wd engine part out Contur is looming for an oil bath air cleaner __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

03-17-2020, 01:27 PM	#16
countr Registered User Join Date: Dec 2015 Location: Russell, Iowa Posts: 2,009	Re: 1970 292 4wd engine part out Do you have pics. of the air cleaner set up? Thanks Russ

03-23-2020, 07:23 AM	#21
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 710	Re: 1970 292 4wd engine part out I guess nobody needs 6 cylinder parts... TTT feel free to make reasonable offers on the motor pieces... firm on the crossmember and mounts Posted via Mobile Device

04-29-2020, 09:29 PM	#22
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 710	Re: 1970 292 4wd engine part out Bump Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.