6.0l LS1 in my 68, finally got it - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FirstGen · 06-18-2004, 12:21 PM

Well I finally bought a LS1. I got a killer deal on a complete 6.0 liter. I am now looking for a used T56, 6 speed from a LS1 car with all the hydraulics and clutch.

Jerr, sorry I didn't respond to your PM before but I have been super busy! I PMed you back finally. Thanks.

Here is a pic of the truck (needs springs!) and the new motor.

I'm getting really excited. I bought a cam and springs from an 02 Z06 that will be going in soon.

I gutted and painted the whole interior this week and I'm about to put it all back together. Does anyone know if they make a sliding rear window aftermarket?

FirstGen · 06-18-2004, 12:27 PM

truck pic and 6.0 liter LS1!

**Yukon Jack** · 06-18-2004, 12:43 PM

Will be interesting to see the install.

piecesparts · 06-18-2004, 02:26 PM

YEP, want to see the install. I am presently working on a LS-1 install in my 68 Chevy truck/Rod at this time. I am looking for a clean look and horsepower at the same time. I think that I have all of the parts that I want lined up at Street and Performance.

jorgensensc · 06-18-2004, 02:59 PM

Sawweeet!!!

FirstGen · 06-18-2004, 04:52 PM

Yeah, S and P is wayyyy too expensive for me though... I think I can do just about everything with out using them. Hopefully!

FRENCHBLUE72 · 06-18-2004, 05:20 PM

Nice looking short step can't wait to see the 6.0 installed

FirstGen · 06-19-2004, 12:17 PM

it's a long step actually. I like them better...

neonlarry · 06-19-2004, 02:15 PM

Did you get an LQ4 or an LQ9? And if you don't mind telling just how good of a "killer deal" did you get? I'm asking because I am actively looking for a 6.0 and a 4L80E and wanted to get some idea what about prices. Keep us posted on the install and take LOTS of pictures. I agree with the expensive part, why have someone else make what you can do yourself for a lot less.

FirstGen · 06-19-2004, 02:33 PM

It is an LQ4 motor. Which is what I wanted anyway, better for a blower or N2O... I paid $800 for the motor and wiring, PCM. From what I have seen they usually go for about 2500+ for a complete motor and wiring/pcm setup. Those 4l80's are pretty pricy also, about a grand....

I'll keep everyone posted. I'll know on Monday if I got this 6 speed from my buddy at LG Motorsports of not...

saulgoode · 06-19-2004, 11:00 PM

*****in, can't wait to see the install on that.

Saulgoode

sixty8c10 · 06-20-2004, 12:05 AM

what is that color on your truck

FirstGen · 06-20-2004, 04:15 AM

PPG base coat with three clears, BMW - Dark Steel Metalic

I think it looks real clean, has almost a blue tint to it in the sun.

FirstGen · 06-24-2004, 02:13 AM

first mod, well besides the ZO6 cam and springs I installed tonight in the 6.0liter. I drilled a hole in the stock tank sending unit deal and brazed in 1/2 tubing and routed it with 90 and 45 degree couplers all the way down to the bottom. If you look at the new piping it makes the stock stuff look like a toothpick! haha, 1/2" is overkill but I plan on Ying it and running a dedicated nitrous fuel pump and another inline walbro 255 to the motor. Since these are return line systems the stock line will be used as a return.

06-18-2004, 12:21 PM	#1
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	6.0l LS1 in my 68, finally got it Well I finally bought a LS1. I got a killer deal on a complete 6.0 liter. I am now looking for a used T56, 6 speed from a LS1 car with all the hydraulics and clutch. Jerr, sorry I didn't respond to your PM before but I have been super busy! I PMed you back finally. Thanks. Here is a pic of the truck (needs springs!) and the new motor. I'm getting really excited. I bought a cam and springs from an 02 Z06 that will be going in soon. I gutted and painted the whole interior this week and I'm about to put it all back together. Does anyone know if they make a sliding rear window aftermarket? __________________ 1968 C10 build in process TT LSA/6L90e/9"

06-18-2004, 12:27 PM	#2
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	truck pic and 6.0 liter LS1! Attached Images __________________ 1968 C10 build in process TT LSA/6L90e/9"

06-18-2004, 12:43 PM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Will be interesting to see the install. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-18-2004, 02:59 PM	#5
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Sawweeet!!! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

06-18-2004, 04:52 PM	#6
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Yeah, S and P is wayyyy too expensive for me though... I think I can do just about everything with out using them. Hopefully! __________________ 1968 C10 build in process TT LSA/6L90e/9"

06-18-2004, 02:26 PM	#4
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	YEP, want to see the install. I am presently working on a LS-1 install in my 68 Chevy truck/Rod at this time. I am looking for a clean look and horsepower at the same time. I think that I have all of the parts that I want lined up at Street and Performance.

06-18-2004, 05:20 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Nice looking short step can't wait to see the 6.0 installed

06-19-2004, 12:17 PM	#8
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	it's a long step actually. I like them better... __________________ 1968 C10 build in process TT LSA/6L90e/9"

06-19-2004, 02:15 PM	#9
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Did you get an LQ4 or an LQ9? And if you don't mind telling just how good of a "killer deal" did you get? I'm asking because I am actively looking for a 6.0 and a 4L80E and wanted to get some idea what about prices. Keep us posted on the install and take LOTS of pictures. I agree with the expensive part, why have someone else make what you can do yourself for a lot less. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

06-19-2004, 02:33 PM	#10
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	It is an LQ4 motor. Which is what I wanted anyway, better for a blower or N2O... I paid $800 for the motor and wiring, PCM. From what I have seen they usually go for about 2500+ for a complete motor and wiring/pcm setup. Those 4l80's are pretty pricy also, about a grand.... I'll keep everyone posted. I'll know on Monday if I got this 6 speed from my buddy at LG Motorsports of not... __________________ 1968 C10 build in process TT LSA/6L90e/9"

06-19-2004, 11:00 PM	#11
saulgoode Registered User Join Date: Dec 2003 Location: Houston Posts: 388	*****in, can't wait to see the install on that. Saulgoode

06-20-2004, 12:05 AM	#12
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	what is that color on your truck __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

06-20-2004, 04:15 AM	#13
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	PPG base coat with three clears, BMW - Dark Steel Metalic I think it looks real clean, has almost a blue tint to it in the sun. __________________ 1968 C10 build in process TT LSA/6L90e/9"

06-24-2004, 02:13 AM	#14
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	first mod, well besides the ZO6 cam and springs I installed tonight in the 6.0liter. I drilled a hole in the stock tank sending unit deal and brazed in 1/2 tubing and routed it with 90 and 45 degree couplers all the way down to the bottom. If you look at the new piping it makes the stock stuff look like a toothpick! haha, 1/2" is overkill but I plan on Ying it and running a dedicated nitrous fuel pump and another inline walbro 255 to the motor. Since these are return line systems the stock line will be used as a return. Attached Images __________________ 1968 C10 build in process TT LSA/6L90e/9"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.