1971 c10 master cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CarlsLQ9SS** · 06-13-2020, 10:55 PM

Is there difference in a master cylinder from a non power brake and power brake truck?

**The Rocknrod** · 06-14-2020, 07:24 AM

Good info on the MC's - http://67-72chevytrucks.com/vboard/s...73&postcount=7
Bore size for manual is usually 1" for manual and 1-1/8" for power

**CarlsLQ9SS** · 06-15-2020, 11:15 PM

Quote:

Originally Posted by The Rocknrod

Good info on the MC's - http://67-72chevytrucks.com/vboard/s...73&postcount=7
Bore size for manual is usually 1" for manual and 1-1/8" for power

Thank you for your reply and the link with the info. Now I can tell the difference between the two. So if you use a spacer in the deep hole manual master cylinder you can use it with a power brake booster?

06-13-2020, 10:55 PM	#1
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	1971 c10 master cylinder Is there difference in a master cylinder from a non power brake and power brake truck?

06-14-2020, 07:24 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1971 c10 master cylinder Good info on the MC's - http://67-72chevytrucks.com/vboard/s...73&postcount=7 Bore size for manual is usually 1" for manual and 1-1/8" for power __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.