|
08-19-2020, 08:32 AM
|
#1 |
|
Registered User
Join Date: Sep 2011
Location: Hereford, TX
Posts: 8
|
1966 tailgate handle
i wanted to come up with a handle that was clean and flat as possible, so i came up with this set up, no visible bolts or screws holding this from the front or back
Last edited by Juan; 08-19-2020 at 10:55 AM. |
|
|
|
08-19-2020, 08:35 AM
|
#2 |
|
Registered User
Join Date: Sep 2011
Location: Hereford, TX
Posts: 8
|
Re: 1966 tailgate handle
More pictures
|
|
|
|
|
08-19-2020, 08:36 AM
|
#3 |
|
Registered User
Join Date: Sep 2011
Location: Hereford, TX
Posts: 8
|
Re: 1966 tailgate handle
Cant figure out how to fix the pictures
|
|
|
|
|
08-19-2020, 03:06 PM
|
#4 |
|
Registered User
 
Join Date: Sep 2017
Location: Cedar Park, Tx
Posts: 209
|
Re: 1966 tailgate handle
Looks good.
What handle did you start with? Any detail pictures of the panel cut out and install?
__________________
Wampus Cat Build: http://67-72chevytrucks.com/vboard/s...d.php?t=759550 |
|
|
|
|
08-19-2020, 05:37 PM
|
#5 |
|
Registered User
Join Date: Sep 2011
Location: Hereford, TX
Posts: 8
|
Re: 1966 tailgate handle
89-98 chevy tailgate handle, i took a stock handle and cut roughly 3/4-1 inch out to decrease the height to make it more compact and cut away other material that was in the way, then i made a braket with some strong sheet metal that i had laying around, made some tabs to hold the handle assembly on the inside, and welded a thin nut so one srew bolds it on the bottom so it can be easily removed, then welded that bracket to the inside of the tailgate
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
