55.2-59 Power rack extensions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Rickysnickers** · 11-07-2020, 04:57 PM

For those that have installed Mustang II style suspensions, where are you getting your 2" rack extensions? I've found a couple of eBay auctions for them, but I'm interested in getting something that is of known quality. There a Heidt's kit out there, but I don't need their 4" kit at $60. I just want to get the 2" extension. Any leads? Thank you.

MiraclePieCo · 11-07-2020, 07:06 PM

Speedway.

https://www.speedwaymotors.com/Musta...ions,7488.html

.

**mr48chev** · 11-07-2020, 09:55 PM

This outfit on Ebay has extensions but no details that I can find on how much they extend the width. https://www.ebay.com/itm/2x-Inner-Ti....c100005.m1851

The description is beyond vague.

dsraven · 11-08-2020, 12:21 AM

check the heidt's catalogue site in the tech tips section for their IFS geometry write up. a little insight into how it all works so you don't end up with bump steer. even if you know what you're doing, it's a good refresher.
you could alsways get a set built for you if you can't find the correct length.

**bosco** · 11-08-2020, 02:18 PM

CPP has them as well. I would check their site.

jwhotrod · 11-08-2020, 02:45 PM

Fatman Fabrications Brett makes nothing but the best. He is a mechanical engineer ontop of being a great guy and friend. you wont go wrong with his stuff.

11-07-2020, 04:57 PM	#1
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,063	Power rack extensions For those that have installed Mustang II style suspensions, where are you getting your 2" rack extensions? I've found a couple of eBay auctions for them, but I'm interested in getting something that is of known quality. There a Heidt's kit out there, but I don't need their 4" kit at $60. I just want to get the 2" extension. Any leads? Thank you.

11-07-2020, 07:06 PM	#2
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: Power rack extensions Speedway. https://www.speedwaymotors.com/Musta...ions,7488.html . __________________ 1951 Chevy Panel Truck Last edited by MiraclePieCo; 11-07-2020 at 07:16 PM.

11-07-2020, 09:55 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,710	Re: Power rack extensions This outfit on Ebay has extensions but no details that I can find on how much they extend the width. https://www.ebay.com/itm/2x-Inner-Ti....c100005.m1851 The description is beyond vague. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-08-2020, 12:21 AM	#4
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,333	Re: Power rack extensions check the heidt's catalogue site in the tech tips section for their IFS geometry write up. a little insight into how it all works so you don't end up with bump steer. even if you know what you're doing, it's a good refresher. you could alsways get a set built for you if you can't find the correct length.

11-08-2020, 02:18 PM	#5
bosco Registered User Join Date: Apr 2016 Location: Temescal Valley, CA Posts: 234	Re: Power rack extensions CPP has them as well. I would check their site. Last edited by bosco; 11-12-2020 at 02:15 PM.

11-08-2020, 02:45 PM	#6
jwhotrod Registered User Join Date: Oct 2018 Location: DeKalb, IL Posts: 159	Re: Power rack extensions Fatman Fabrications Brett makes nothing but the best. He is a mechanical engineer ontop of being a great guy and friend. you wont go wrong with his stuff.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.