newer seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sammywells · 12-06-2020, 12:58 PM

Anyone ever use seats from a chevy colorado in a c10

Peanut74 · 12-09-2020, 12:10 AM

Following as I am getting close to deciding on seats. Surprised you haven't gotten any feedback yet.

From what I have been able to find out everyone seems to prefer Silverado seats. Currently leaning toward a 40/20/40 front seat out of a Silverado. What I like most is that they have integrated seat belts.

D'Monsta · 12-09-2020, 09:59 AM

What years do we look for in the Silverado seats?

manuelv72 · 12-15-2020, 08:46 PM

The usual are the 88-98 Silverado seats. I personally have 96 Silverado bench in mine.

**kev2809** · 12-16-2020, 08:14 AM

the 99-06 are nice too

Andy4639 · 12-16-2020, 11:40 AM

I have the 99 Tahoe 6 way electric with heaters and love them. I also have a 90's bench seat in the Ramp truck with arm rest. It's a nice fit for these trucks as well.

67C10Step · 12-16-2020, 12:23 PM

This was the only change someone had done in my truck before I got it. Well, besides the step side bed but it was 68-72 so period correct.

Peanut74 · 12-17-2020, 12:14 AM

I got a couple questions for the people with Silverado seats:

1> What modifications did you make to either the seat or floor pan to make it work?

2> What did you pay for you seat? Just trying to get an idea on how much I should set aside for it.

**kev2809** · 12-17-2020, 08:04 AM

Quote:

Originally Posted by Peanut74

I got a couple questions for the people with Silverado seats:

1> What modifications did you make to either the seat or floor pan to make it work?

2> What did you pay for you seat? Just trying to get an idea on how much I should set aside for it.

on my 99-06 seats, for the bolt holes i just lined it up where it was comfortable and drilled new holes and put new bolts. the tricky part was when u slide it back, the track was hitting a hump in my floor. i notched it out for clearance. if u dont want to cut ur floor, then u need to make spacers or risers

Andy4639 · 12-17-2020, 01:21 PM

My 71 C-10:
99 Tahoe 6 way electric seats with heat. I gave $65.00 for both seats at the local LKQ yard in Greenville sc. The heaters are nice on chilly mornings!
As far as mounting them I used big, thick flat washers under the cab. I also used the 99 Tahoe seat belts.

The Ramp truck:
I paid $150.00 for the seat & belts.
90's bench seat with arm rest and head rest. I loosened up the frame bolts and lined the seat up with the front factory seat holes. I then marked the rear holes and drilled. I also used the big flat washers under the truck. I then put a 1/2" lugnut under the back frame so the seat sat level. Tightened up all the bolts. I also used the seat belts out of the same model truck.

**StingRay** · 12-17-2020, 02:01 PM

So like a broken record every time this topic comes up I will chime in with 67-72 Trucks actually require a reinforced floor to use stock 69-72 bucket seats. GM in their wisdom knew that the regular bench seat floor would not suffice. Now move on to modern seats that have integrated belts. In a forward collision you pull forward with the shoulder belt from the top of the seat turning it into a big lever pushing down through the front seat mounts to force the front through the floor and you and your passengers into the steering wheel and dash. So the floor isn't strong enough for stock buckets where all of the seat belt loads go into the body behind and above you. Now you want to induce all of the seat and belt loads into the seat mounting points you have improvised into the floor? Another good possibility is in a roll over just ripping the seat with you in it out of the improvised floor mounting so you can be beaten into a pulp inside the cab. I actually design and oversee seat/seat belt mounting and destructive testing for it in RV's. I could actually come up with something that is safe....... and I wouldn't do it even for myself. Use the factory mounting points for seat belts that work. Mount your seats to proper reinforced mounts. It is not as simple as drilling new holes and bolting through the tin.

MacataQ · 12-17-2020, 02:16 PM

StingRay
great input on this topic, havent got this far on my build yet, but i will add that
to a folder i have on seat & interior options. is your truck outfitted with stock or non-stock seats. also buckets or bench?
thanx again for info
Mac

**StingRay** · 12-17-2020, 02:50 PM

67-68 Buddy buckets.

Quote:

Originally Posted by MacataQ

StingRay
great input on this topic, havent got this far on my build yet, but i will add that
to a folder i have on seat & interior options. is your truck outfitted with stock or non-stock seats. also buckets or bench?
thanx again for info
Mac

**kev2809** · 12-17-2020, 03:24 PM

Quote:

Originally Posted by StingRay

So like a broken record every time this topic comes up I will chime in with 67-72 Trucks actually require a reinforced floor to use stock 69-72 bucket seats. GM in their wisdom knew that the regular bench seat floor would not suffice. Now move on to modern seats that have integrated belts. In a forward collision you pull forward with the shoulder belt from the top of the seat turning it into a big lever pushing down through the front seat mounts to force the front through the floor and you and your passengers into the steering wheel and dash. So the floor isn't strong enough for stock buckets where all of the seat belt loads go into the body behind and above you. Now you want to induce all of the seat and belt loads into the seat mounting points you have improvised into the floor? Another good possibility is in a roll over just ripping the seat with you in it out of the improvised floor mounting so you can be beaten into a pulp inside the cab. I actually design and oversee seat/seat belt mounting and destructive testing for it in RV's. I could actually come up with something that is safe....... and I wouldn't do it even for myself. Use the factory mounting points for seat belts that work. Mount your seats to proper reinforced mounts. It is not as simple as drilling new holes and bolting through the tin.

then weld some c channel to the floor where the new hole is? thats what the factory did if i remember right, been a while since i looked under my truck and havent driven it far after the seat swap.

im curious though, how hard of a collision would it take to pull a seat floor out that isnt reinforced?

**kev2809** · 12-17-2020, 03:54 PM

also OP.. this thread might help

http://67-72chevytrucks.com/vboard/s...ght=99-06+seat

**StingRay** · 12-17-2020, 08:27 PM

A little more complex a piece than a simple channel. Reinforcements are in multiple locations. Force required will depend on multiple factors. Condition of the floor, direction of load and how it's fastened. The weight of the seat has a lot of bearing on how big a hit it would take. If you are thinking integrated belt seats it'd take significant reinforcements to keep the seat and you attached to the cab in a position conducive to your good health.

Quote:

Originally Posted by kev2809

then weld some c channel to the floor where the new hole is? thats what the factory did if i remember right, been a while since i looked under my truck and havent driven it far after the seat swap.

im curious though, how hard of a collision would it take to pull a seat floor out that isnt reinforced?

12-06-2020, 12:58 PM	#1
sammywells Registered User Join Date: Jun 2018 Location: Lucasville,oh Posts: 61	newer seats Anyone ever use seats from a chevy colorado in a c10

12-09-2020, 12:10 AM	#2
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: newer seats Following as I am getting close to deciding on seats. Surprised you haven't gotten any feedback yet. From what I have been able to find out everyone seems to prefer Silverado seats. Currently leaning toward a 40/20/40 front seat out of a Silverado. What I like most is that they have integrated seat belts. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

12-09-2020, 09:59 AM	#3
D'Monsta Registered User Join Date: Aug 2020 Location: Charlotte Posts: 54	Re: newer seats What years do we look for in the Silverado seats?

12-15-2020, 08:46 PM	#4
manuelv72 Registered User Join Date: Jul 2013 Location: phoenix, az Posts: 12	Re: newer seats The usual are the 88-98 Silverado seats. I personally have 96 Silverado bench in mine.

12-16-2020, 08:14 AM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,180	Re: newer seats the 99-06 are nice too __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-16-2020, 11:40 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: newer seats I have the 99 Tahoe 6 way electric with heaters and love them. I also have a 90's bench seat in the Ramp truck with arm rest. It's a nice fit for these trucks as well. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-16-2020, 12:23 PM	#7
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,475	Re: newer seats This was the only change someone had done in my truck before I got it. Well, besides the step side bed but it was 68-72 so period correct. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

12-17-2020, 12:14 AM	#8
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: newer seats I got a couple questions for the people with Silverado seats: 1> What modifications did you make to either the seat or floor pan to make it work? 2> What did you pay for you seat? Just trying to get an idea on how much I should set aside for it. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

12-17-2020, 01:21 PM	#10
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: newer seats My 71 C-10: 99 Tahoe 6 way electric seats with heat. I gave $65.00 for both seats at the local LKQ yard in Greenville sc. The heaters are nice on chilly mornings! As far as mounting them I used big, thick flat washers under the cab. I also used the 99 Tahoe seat belts. The Ramp truck: I paid $150.00 for the seat & belts. 90's bench seat with arm rest and head rest. I loosened up the frame bolts and lined the seat up with the front factory seat holes. I then marked the rear holes and drilled. I also used the big flat washers under the truck. I then put a 1/2" lugnut under the back frame so the seat sat level. Tightened up all the bolts. I also used the seat belts out of the same model truck. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-17-2020, 02:01 PM	#11
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: newer seats So like a broken record every time this topic comes up I will chime in with 67-72 Trucks actually require a reinforced floor to use stock 69-72 bucket seats. GM in their wisdom knew that the regular bench seat floor would not suffice. Now move on to modern seats that have integrated belts. In a forward collision you pull forward with the shoulder belt from the top of the seat turning it into a big lever pushing down through the front seat mounts to force the front through the floor and you and your passengers into the steering wheel and dash. So the floor isn't strong enough for stock buckets where all of the seat belt loads go into the body behind and above you. Now you want to induce all of the seat and belt loads into the seat mounting points you have improvised into the floor? Another good possibility is in a roll over just ripping the seat with you in it out of the improvised floor mounting so you can be beaten into a pulp inside the cab. I actually design and oversee seat/seat belt mounting and destructive testing for it in RV's. I could actually come up with something that is safe....... and I wouldn't do it even for myself. Use the factory mounting points for seat belts that work. Mount your seats to proper reinforced mounts. It is not as simple as drilling new holes and bolting through the tin. __________________ Saskatoon, Saskatchewan Canada

12-17-2020, 02:16 PM	#12
MacataQ Registered User Join Date: Aug 2018 Location: port colborne Posts: 40	Re: newer seats StingRay great input on this topic, havent got this far on my build yet, but i will add that to a folder i have on seat & interior options. is your truck outfitted with stock or non-stock seats. also buckets or bench? thanx again for info Mac

12-17-2020, 03:54 PM	#15
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,180	Re: newer seats also OP.. this thread might help http://67-72chevytrucks.com/vboard/s...ght=99-06+seat __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.