'72 Suburban - 2005 L59 5.3/4L60 swap - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 06-01-2014, 03:56 PM

2.5" exhaust is plenty for the LS motors unless you have a lot of HP. Nice build by the way.
May I make a suggestion on your cold air intake.
90's model caddy air box. Seal up the factory opening and drill a 4" hole in the bottom of it. Buy one 4" ninty and 2 coupling from Lowes. Drill a 4" hole through the core support and bottom of air box then install the coupling from the front of the truck then the ninty and the other coupling through the hole in the box.

72c10suburban · 06-13-2014, 07:57 PM

No real progress, i messed around and bought a daily driver yota and of course lift, tires and now a camper shell has sort of delayed progress. slowly getting back to it though. The engine and tranny is in but thats about as far as ive made it.

Andy - I like the airbox idea. May have to hit up the pull-a-part once i get it fired off.

72c10suburban · 10-14-2014, 11:46 PM

Some progress. Got the alternator rebuilt and the belt drive on. I ordered a few odd and ends for the front clip and hope to have it reinstalled this weekend.

tinsoldier · 12-20-2014, 10:31 AM

Any update? I am about to yank mine out to do a swap.

72c10suburban · 12-23-2014, 12:02 AM

Yes and no on the progress. The complete engine and tranny is in as well as the cooling system. I still need to finish up the wiring and do the fuel systems then the drive shaft, exhaust and the tune. Its stalled out while i get through Christmas, then game on again first of the year. It at least looks like a complete Suburban now.

72c10suburban · 01-29-2015, 12:43 AM

Finally getting started back. I finished modifying the harness and started installing it today.

SierraMtns · 02-04-2015, 12:51 AM

Quote:

Originally Posted by 72c10suburban

Some progress. Got the alternator rebuilt and the belt drive on. I ordered a few odd and ends for the front clip and hope to have it reinstalled this weekend.

Nice build. Thanks for posting up this picture. I was wondering if it was possible to not run AC. Did you just have to get a shorter belt?

72c10suburban · 02-04-2015, 06:07 AM

The A/C runs off of its own belt on the truck motors. All I did was remove the compressor and bracket for it.

hubba033 · 02-05-2015, 10:50 PM

Any tips on how to remove those 2 stubborn plugs on the transmission?

72c10suburban · 02-06-2015, 12:03 AM

Basically they're glued in. I've heard a heat gun will soften it up. I got lucky and mine came out without too much trouble.

enduroride · 04-14-2015, 08:37 AM

What cam did you install in the 5.3 (part number, lift/duration) ? We are doing the same swap in a 72 LWB C10. Waiting on suspension parts to come in from Porterbuilt, figured I could do some motor work while we wait !
Thanks !

72c10suburban · 02-25-2016, 12:05 AM

Wow. Been a while since Ive been on here. Finally getting back to work on the Suburban after almost a year with little to no progress. Ive ordered the fuel pump, and will be ordering a new tank and sending unit from LMC and will be using Dorman nylon fuel lines. Ive managed to get all the cooling in and plumbed up as well as the inner fenders. Thats been it for the last year as the remaining project fund ended up buying kayaks and a gun or two. Im back on it now.

Average Joe · 02-25-2016, 06:17 PM

Good 4 you!

72c10suburban · 04-25-2019, 07:35 PM

Been a while, and progress has been slow, but this project still LIVES!

It now runs, and moves under its own power. Well, from 1 carport to the other. Ill post some updates next week when I actually get some time off.

Average Joe · 04-27-2019, 08:32 PM

Quote:

Originally Posted by 72c10suburban

Been a while, and progress has been slow, but this project still LIVES!

It now runs, and moves under its own power. Well, from 1 carport to the other. Ill post some updates next week when I actually get some time off.

Happy to hear this!

**kev2809** · 01-02-2021, 12:00 PM

any updates?

06-01-2014, 03:56 PM	#51
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: '72 Suburban - 2005 L59 5.3/4L60 swap 2.5" exhaust is plenty for the LS motors unless you have a lot of HP. Nice build by the way. May I make a suggestion on your cold air intake. 90's model caddy air box. Seal up the factory opening and drill a 4" hole in the bottom of it. Buy one 4" ninty and 2 coupling from Lowes. Drill a 4" hole through the core support and bottom of air box then install the coupling from the front of the truck then the ninty and the other coupling through the hole in the box. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

06-13-2014, 07:57 PM	#52
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap No real progress, i messed around and bought a daily driver yota and of course lift, tires and now a camper shell has sort of delayed progress. slowly getting back to it though. The engine and tranny is in but thats about as far as ive made it. Andy - I like the airbox idea. May have to hit up the pull-a-part once i get it fired off. __________________ 72 C10 Suburban 5.3/4L60 swap thread

10-14-2014, 11:46 PM	#53
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Some progress. Got the alternator rebuilt and the belt drive on. I ordered a few odd and ends for the front clip and hope to have it reinstalled this weekend. __________________ 72 C10 Suburban 5.3/4L60 swap thread

12-20-2014, 10:31 AM	#54
tinsoldier Registered User Join Date: Mar 2013 Location: Peachtree Corners, GA Posts: 84	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Any update? I am about to yank mine out to do a swap.

12-23-2014, 12:02 AM	#55
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Yes and no on the progress. The complete engine and tranny is in as well as the cooling system. I still need to finish up the wiring and do the fuel systems then the drive shaft, exhaust and the tune. Its stalled out while i get through Christmas, then game on again first of the year. It at least looks like a complete Suburban now. __________________ 72 C10 Suburban 5.3/4L60 swap thread

01-29-2015, 12:43 AM	#56
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Finally getting started back. I finished modifying the harness and started installing it today. __________________ 72 C10 Suburban 5.3/4L60 swap thread

02-04-2015, 06:07 AM	#58
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap The A/C runs off of its own belt on the truck motors. All I did was remove the compressor and bracket for it. __________________ 72 C10 Suburban 5.3/4L60 swap thread

02-05-2015, 10:50 PM	#59
hubba033 Registered User Join Date: Sep 2013 Location: Lancaster, PA Posts: 32	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Any tips on how to remove those 2 stubborn plugs on the transmission? __________________ 72 C10 swb LS 5.3 LSA Blower/4l60 performabuilt 01 Pontiac Trans Am WS6

02-06-2015, 12:03 AM	#60
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Basically they're glued in. I've heard a heat gun will soften it up. I got lucky and mine came out without too much trouble. __________________ 72 C10 Suburban 5.3/4L60 swap thread

04-14-2015, 08:37 AM	#61
enduroride Registered User Join Date: Jan 2015 Location: Prairieville, LA Posts: 129	Re: '72 Suburban - 2005 L59 5.3/4L60 swap What cam did you install in the 5.3 (part number, lift/duration) ? We are doing the same swap in a 72 LWB C10. Waiting on suspension parts to come in from Porterbuilt, figured I could do some motor work while we wait ! Thanks ! __________________ 2016 Silverado2005 GMC Sierra 2002 Chevy Slverado Extra Cab (youngest sons) 2009 GMC Denali (oldest sons) 2015 Lexus 250i (wifes) 1972 Chevy C10 LWB, 5.3 / 4L60e swap "COLOR OF MONEY" http://www.louisianaclassictruckclub.com

02-25-2016, 12:05 AM	#62
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Wow. Been a while since Ive been on here. Finally getting back to work on the Suburban after almost a year with little to no progress. Ive ordered the fuel pump, and will be ordering a new tank and sending unit from LMC and will be using Dorman nylon fuel lines. Ive managed to get all the cooling in and plumbed up as well as the inner fenders. Thats been it for the last year as the remaining project fund ended up buying kayaks and a gun or two. Im back on it now. __________________ 72 C10 Suburban 5.3/4L60 swap thread

02-25-2016, 06:17 PM	#63
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Good 4 you! __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

04-25-2019, 07:35 PM	#64
72c10suburban Registered User Join Date: Jul 2013 Location: Calhoun Ga Posts: 87	Re: '72 Suburban - 2005 L59 5.3/4L60 swap Been a while, and progress has been slow, but this project still LIVES! It now runs, and moves under its own power. Well, from 1 carport to the other. Ill post some updates next week when I actually get some time off. __________________ 72 C10 Suburban 5.3/4L60 swap thread

01-02-2021, 12:00 PM	#66
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: '72 Suburban - 2005 L59 5.3/4L60 swap any updates? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.