|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-04-2021, 09:47 PM
|
#26 |
|
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
|
Re: Tie rod and steering linkage
|
|
|
|
01-05-2021, 10:49 AM
|
#27 |
|
Registered User
Join Date: Oct 2003
Location: Regina Saskatchewan Canada eh!
Posts: 171
|
Re: Tie rod and steering linkage
I do get it figured out, after reading the previous posts. Thx for all the help though.
|
|
|
|
|
01-05-2021, 11:27 AM
|
#28 |
|
Registered User
 Join Date: Mar 2010
Location: saskatoon, sk
Posts: 21
|
Re: Tie rod and steering linkage
My driver’s side with plate and spacers
Last edited by Rickysnickers; 01-05-2021 at 12:05 PM. Reason: rotated photo |
|
|
|
|
01-05-2021, 05:07 PM
|
#29 |
|
Registered User
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,200
|
Re: Tie rod and steering linkage
I believe a front sway bar does help a 1/2 ton truck with stock springs feel better in town or on the highway. I used a homemade setup to install a front bar from a square body truck into mine years ago. Last summer I replaced it with a stock bar that I removed from a GMC Panel. Both bars make a noticeable difference. If I were junkyard scrounging for a bar I'd start with a YJ Jeep. I did some quick measuring last summer and I believe the YJ bar(s) could be installed fairly easily.
|
|
|
|
|
01-05-2021, 05:30 PM
|
#30 |
|
Registered User
Join Date: Oct 2003
Location: Regina Saskatchewan Canada eh!
Posts: 171
|
Re: Tie rod and steering linkage
Current progress. (Added shocks since)
Last edited by Rickysnickers; 01-06-2021 at 11:52 AM. Reason: Rotated photos |
|
|
|
|
01-05-2021, 11:07 PM
|
#31 |
|
Registered User
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,482
|
Re: Tie rod and steering linkage
looks very much like my AD. the only other thing to think about is if you have a dropped I beam, the tie rod needs to mount UNDER the spindle arms. otherwise the tie rod will inter fear with the springs.
And yes, sway bars help alot. Ive got both front & rear. Doesnt handle like my Grand Cherokee, but the difference is noticable.
__________________
49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!! |
|
|
|
|
01-06-2021, 01:18 AM
|
#32 |
|
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,333
|
Re: Tie rod and steering linkage
shiny. looks good.
will you keep the stock ride height? |
|
|
|
|
01-06-2021, 10:15 PM
|
#33 | |
|
Registered User
Join Date: Oct 2003
Location: Regina Saskatchewan Canada eh!
Posts: 171
|
Re: Tie rod and steering linkage
Quote:
|
|
|
|
|
|
01-09-2021, 02:43 PM
|
#34 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
|
Re: Tie rod and steering linkage
G&R's57GMC photo of the right spindle shows the spacer at the top.
A design difference between TF and earlier trucks. Looking at the photo of my spindle I posted earlier in the thread That has 54 car backing plates I have spacers top and bottom. I know I had to make one set or the other when I did the swap. That is a 54 3100 axle.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
