Heater control knob - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dream66 · 11-30-2020, 07:09 PM

Lost my heater control knob during restoration (pictured below)

Haven't found one yet on Brothers, LMC or ebay.

Any ideas?

bigmoe · 11-30-2020, 07:21 PM

Just the knob itself or the whole cable/switch assembly?

dream66 · 11-30-2020, 08:19 PM

Just the knob. I may have found an acceptable one from vintage air.

Lower right hand knob in the pic below. I'll hafta call and check shaft size and whether it has a set screw.

bigmoe · 11-30-2020, 08:29 PM

I bought a nice billet one on eBay for mine but wasn’t concerned with it looking original.

**The Rocknrod** · 12-01-2020, 08:51 AM

Could you use a wiper knob with the set screw in the base for that?

dream66 · 12-01-2020, 09:34 AM

Maybe.

The shaft size on the wiper knob is larger than the heater control shaft but perhaps I could fill it with JB weld or comparable and re-drill for the smaller shaft size.

dream66 · 12-01-2020, 02:59 PM

Okay, I got the problem solved - YAY !!!!!!

Well, maybe.

The reproduction radio knob should work. Same shaft size with a flat and set screw.

**The Rocknrod** · 12-01-2020, 03:52 PM

Think that's the headlight unit?

dream66 · 12-01-2020, 05:44 PM

Not according to LMC or NPD websites. The headlight knob is pre-mounted on a triangular shaped shaft.

AcampoDave · 12-01-2020, 09:42 PM

Those knobs are pretty decent. Not quite original but I bought some for my Vintage Air kit and decided to complete the look by doing them all.

**The Rocknrod** · 12-02-2020, 07:12 AM

A radio knob with a set screw is whats throwing me...

dream66 · 12-02-2020, 07:16 AM

Good point! We'll see when it arrives.

**The Rocknrod** · 12-02-2020, 07:24 AM

My aftermarket choke knob has the set screw, radio knob is usually is a slip on. I bought a choke knob from The Truck Shop in Orange it was exactly as the one you show. I plan on getting their radio knob set and will not be happy if if it's a set screw set up. I'm sure it will ruin their day.

dream66 · 12-02-2020, 02:43 PM

Well whaddya know. My parts donor truck had the heater knob still on it and it looks EXACTLY like the radio knob with a set screw pictured above except without the chrome trim.

Since I ordered the rest of the knobs with chrome trim, the radio knob I ordered should work.

val1gonzales · 12-02-2020, 08:48 PM

That's the windshield wiper knob.

**The Rocknrod** · 12-02-2020, 09:22 PM

Yep. Give that man a cigar.

dream66 · 12-02-2020, 11:01 PM

Quote:

Originally Posted by val1gonzales

That's the windshield wiper knob.

Nope. It has a larger shaft that is hexagon shaped.

dream66 · 01-02-2021, 01:46 PM

Quote:

Originally Posted by val1gonzales

That's the windshield wiper knob.

Update: The pic of the radio knob that I posted is WRONG !!! The new radio knobs arrived and they do not have set screws.

val1gonzales is correct. The knobs with the set screws are wiper knobs.

So...I'm going to modify the extra radio knob by adding a set screw...maybe.

To be continued..................

karlbenz · 01-11-2021, 10:47 PM

never understood why they don't reproduce them

**The Rocknrod** · 01-12-2021, 05:13 AM

Quote:

Originally Posted by karlbenz

never understood why they don't reproduce them

But they do. Truck Shop in Orange, CA has them.

karlbenz · 01-12-2021, 09:16 AM

Quote:

Originally Posted by The Rocknrod

But they do. Truck Shop in Orange, CA has them.

I was talking about the heater knob

11-30-2020, 07:09 PM	#1
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Heater control knob Lost my heater control knob during restoration (pictured below) Haven't found one yet on Brothers, LMC or ebay. Any ideas? Attached Images

11-30-2020, 07:21 PM	#2
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 999	Re: Heater control knob Just the knob itself or the whole cable/switch assembly?

11-30-2020, 08:19 PM	#3
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: Heater control knob Just the knob. I may have found an acceptable one from vintage air. Lower right hand knob in the pic below. I'll hafta call and check shaft size and whether it has a set screw. Attached Images

11-30-2020, 08:29 PM	#4
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 999	Re: Heater control knob I bought a nice billet one on eBay for mine but wasn’t concerned with it looking original.

12-01-2020, 08:51 AM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Heater control knob Could you use a wiper knob with the set screw in the base for that? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-01-2020, 09:34 AM	#6
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: Heater control knob Maybe. The shaft size on the wiper knob is larger than the heater control shaft but perhaps I could fill it with JB weld or comparable and re-drill for the smaller shaft size.

12-01-2020, 02:59 PM	#7
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: Heater control knob Okay, I got the problem solved - YAY !!!!!! Well, maybe. The reproduction radio knob should work. Same shaft size with a flat and set screw. Attached Images Last edited by dream66; 12-01-2020 at 03:21 PM.

12-01-2020, 03:52 PM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Heater control knob Think that's the headlight unit? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-01-2020, 05:44 PM	#9
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: Heater control knob Not according to LMC or NPD websites. The headlight knob is pre-mounted on a triangular shaped shaft.

12-01-2020, 09:42 PM	#10
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,781	Re: Heater control knob Those knobs are pretty decent. Not quite original but I bought some for my Vintage Air kit and decided to complete the look by doing them all.

12-02-2020, 07:12 AM	#11
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Heater control knob A radio knob with a set screw is whats throwing me... __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-02-2020, 07:16 AM	#12
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: Heater control knob Good point! We'll see when it arrives.

12-02-2020, 07:24 AM	#13
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Heater control knob My aftermarket choke knob has the set screw, radio knob is usually is a slip on. I bought a choke knob from The Truck Shop in Orange it was exactly as the one you show. I plan on getting their radio knob set and will not be happy if if it's a set screw set up. I'm sure it will ruin their day. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-02-2020, 02:43 PM	#14
dream66 Registered User Join Date: Feb 2020 Location: Austin, TX Posts: 77	Re: Heater control knob Well whaddya know. My parts donor truck had the heater knob still on it and it looks EXACTLY like the radio knob with a set screw pictured above except without the chrome trim. Since I ordered the rest of the knobs with chrome trim, the radio knob I ordered should work.

12-02-2020, 08:48 PM	#15
val1gonzales Registered User Join Date: Apr 2019 Location: San Antonio Posts: 125	Re: Heater control knob That's the windshield wiper knob.



Register or Log In To remove these advertisements.

12-02-2020, 09:22 PM	#16
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Heater control knob Yep. Give that man a cigar. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-11-2021, 10:47 PM	#19
karlbenz Registered User Join Date: Nov 2008 Location: kannapolis, nc Posts: 532	Re: Heater control knob never understood why they don't reproduce them __________________ 2000 c3500 utility bed 7.4l 5sp manual old body style. Cab and chassis 1964 GMC K10 383cu in/sm465/twin stick np205 1965 Chevy C60

Register or Log In To remove these advertisements.