The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-17-2014, 12:43 AM   #1
full foot notch
Registered User
 
Join Date: Apr 2003
Location: Central florida
Posts: 3,223
Grove in center of both front brake rotors ?

Was working on the truck and was trying to see if the spindles on my truck were CPP or not since there's a CPP spring kit all around. I noticed this grove on the rotor and first thought was aww F I've gotta take apart this truck to replace the pads and rotor, so I looked and saw that the pad has plenty of meat on it. I ran my finger nail over it and it seems to be a machined groove and not something akin to a bad pad. I checked the passenger side and it too had an identical groove in the rotor, I tried getting digital calipers between the wheel and rotor and seems about 1 inch down from the outside edge. I've heard of slotted rotors but not with a single groove. And since it's identical locations on both front rotors my mind tends to eliminate that it's bad pads , the second appearing line nearest the hub is just where the cast part of the rotor meets the machined surface , it's not a line at all

Here's a pic of the rotors
full foot notch is offline   Reply With Quote
Old 09-17-2014, 01:04 AM   #2
Mikeeal33
Registered User
 
Mikeeal33's Avatar
 
Join Date: Feb 2014
Location: Northern Nevada
Posts: 208
Re: Grove in center of both front brake rotors ?

Yes it is supposed to be there. No worries run it!
__________________
1972 Driver SOLD
Mikeeal33 is offline   Reply With Quote
Old 09-17-2014, 01:24 AM   #3
full foot notch
Registered User
 
Join Date: Apr 2003
Location: Central florida
Posts: 3,223
Re: Grove in center of both front brake rotors ?

Any idea who makes the rotor ?
full foot notch is offline   Reply With Quote
Old 09-17-2014, 06:57 AM   #4
PGSigns
Senior Member
 
PGSigns's Avatar
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
Re: Grove in center of both front brake rotors ?

Looks like a 5 lug wheel so it is a stock 73 to 87 rotor. Could be from any auto parts store.
Jimmy
__________________
60 to 66 Chevy and GMC window decals
http://67-72chevytrucks.com/vboard/s...d.php?t=661131
Good friends, good food and a hotrod what else do you need?
1966 BBW long fleet Daily driver
1965 BBW short fleet Sold and going to a good home
1965 Suburban
2003 3500 Duramax
2005 Ultra Classic
PGSigns is offline   Reply With Quote
Old 09-17-2014, 12:35 PM   #5
Mikeeal33
Registered User
 
Mikeeal33's Avatar
 
Join Date: Feb 2014
Location: Northern Nevada
Posts: 208
Re: Grove in center of both front brake rotors ?

Quote:
Originally Posted by full foot notch View Post
Any idea who makes the rotor ?
What year is your truck? Mine is a 72 with front discs, and that groove is there so I don't agree with it being a 73-87 rotor. When I was looking at stock replacements they all had the groove in em.

I don't know any particular manufacturer, but I do agree that they can be had at any of the parts stores.
__________________
1972 Driver SOLD
Mikeeal33 is offline   Reply With Quote
Old 09-26-2014, 07:52 PM   #6
NovaBrad
Registered User
 
Join Date: Aug 2014
Location: Huntley,Illinois
Posts: 21
Re: Grove in center of both front brake rotors ?

My 72 C10 has the same groove\rotors and I believe my 72 Nova also has the same groove as well.
NovaBrad is offline   Reply With Quote
Old 09-26-2014, 08:40 PM   #7
full foot notch
Registered User
 
Join Date: Apr 2003
Location: Central florida
Posts: 3,223
Re: Grove in center of both front brake rotors ?

Mines a 72 also. And glad to know I'm not going insane over this
full foot notch is offline   Reply With Quote
Old 09-27-2014, 11:21 AM   #8
66 C10 383
Senior Member
 
Join Date: Aug 2012
Location: Somewhere In So. IL.
Posts: 412
Re: Grove in center of both front brake rotors ?

Most stock style rotors have that groove. I've been told it's to show the rotors thickness, as in, if the rotors are turned past the point the groove is gone, the rotors need to be replaced. So you basically can visually check the thickness rather that checking with micrometers.
__________________
Doug

Old Build Thread - 383/T56
http://www.67-72chevytrucks.com/vboa...d.php?t=540838

Updated Build Thread - Modern Relic - 66 C10 536 Dark Aqua
5.3/4L60E - BTR Stage IV Truck Cam - Vintage Air - Dakota Digital
http://67-72chevytrucks.com/vboard/s...d.php?t=778784
66 C10 383 is offline   Reply With Quote
Old 09-27-2014, 01:17 PM   #9
full foot notch
Registered User
 
Join Date: Apr 2003
Location: Central florida
Posts: 3,223
Re: Grove in center of both front brake rotors ?

See my thought would of been maybe the groove was there for assisting brake pad gasses so that the pad doesn't float
full foot notch is offline   Reply With Quote
Old 10-01-2014, 10:05 AM   #10
ERASER5
Registered User
 
ERASER5's Avatar
 
Join Date: Jun 2006
Location: Indiana
Posts: 4,859
Re: Grove in center of both front brake rotors ?

Quote:
Originally Posted by full foot notch View Post
See my thought would of been maybe the groove was there for assisting brake pad gasses so that the pad doesn't float
That too, but in the days of turning rotors, that groove was a simple visual cue. Groove gone and the rotor not smooth yet? Replace. No question about it.
__________________
'70 GMC C1500 LWB
Power disc brakes. WooHoo!
Posi 6 Lug Dana 60
ERASER5 is offline   Reply With Quote
Old 01-14-2021, 03:07 PM   #11
Rich72C10
Mr. Cheyenne
 
Rich72C10's Avatar
 
Join Date: Jun 2020
Location: Kyle, Texas
Posts: 1,687
Re: Grove in center of both front brake rotors ?

ah, so glad about this posting. I was checking my rotors and thought darn that can't be good, then noticed the same grove on the other side! Guess if the grove is nice and deep - rotor are in good shape!
__________________
Richard

'72 Chevy C10 Cheyenne *Super WHT/MED BRONZE/WHT
SBC 350 | TH350 | LWB | AC | Buddy Seats
Upgrades: Tilt | Front Sway Bar | Radio | Sliding Window | Bed Spare w/Lock
Bed Rails | Full LEDs | Courtesy Lights | Tachometer | Glovebox Lock & Light | Head Light Relays | *Upgraded Fully Super Trim
Rich72C10 is offline   Reply With Quote
Old 01-14-2021, 09:13 PM   #12
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,631
Re: Grove in center of both front brake rotors ?

I don't think they about the gasses back then
kwmech is offline   Reply With Quote
Old 01-15-2021, 01:40 PM   #13
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: Grove in center of both front brake rotors ?

I remember just the early 71-72 rotors having that groove.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com