Suggestions on where to buy a notch cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

G-NUT · 01-25-2021, 04:59 PM

Anyone have any suggestions one where I could buy a prefabricated notch cover? I know AVS and GaugeStore have some options, but I believe I need a taller notch cover than what they offer. Theirs is 6" tall. I have a Porterbuilt dropmember 3 notch on my 1984 Suburban.

SCOTI · 01-25-2021, 05:30 PM

Maybe reach out to Todd @ https://lowboymotorsports.com/

He does a bunch of notch covers for his in-house rear frame set-ups. He might be able to help get you started in a direction you can finish.

61_FL_Apache · 01-26-2021, 09:16 AM

Like the watts link setup.

G-NUT · 02-01-2021, 03:33 PM

Quote:

Originally Posted by SCOTI

Maybe reach out to Todd @ https://lowboymotorsports.com/

He does a bunch of notch covers for his in-house rear frame set-ups. He might be able to help get you started in a direction you can finish.

Thanks. I appreciate the response. I'll check him out. Following your link, I've seen several of their vehicles in magazines and a few at show in person.

G-NUT · 02-01-2021, 03:37 PM

Quote:

Originally Posted by 61_FL_Apache

Like the watts link setup.

Thank you. It's a Porterbuilt product. The entire front and rear suspension is all built / sourced from them. Great stuff. Took a while to get my components but it's all been top notch, great craftsmanship, great fit, all hardware supplied, and great customer support.

SCOTI · 02-01-2021, 04:06 PM

Quote:

Originally Posted by G-NUT

Thanks. I appreciate the response. I'll check him out. Following your link, I've seen several of their vehicles in magazines and a few at show in person.

Yes sir. And he gets stuff done!

I'm amazed @ the pace of work being done as it moves through his shop. Wheels/tires. Frames/frame mods. Dually swap/Semi wheel kits. Sheet-metal tub installs. Raised bed floors. Air ride service work & corrections for poorly built set-ups.

Not sure he does specifically what you're seeking but worth reaching out as he might steer you in a direction if he can't provide what you need.

01-25-2021, 04:59 PM	#1
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 163	Suggestions on where to buy a notch cover Anyone have any suggestions one where I could buy a prefabricated notch cover? I know AVS and GaugeStore have some options, but I believe I need a taller notch cover than what they offer. Theirs is 6" tall. I have a Porterbuilt dropmember 3 notch on my 1984 Suburban. __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed Last edited by G-NUT; 01-25-2021 at 05:25 PM.

01-25-2021, 05:30 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: Suggestions on where to buy a notch cover Maybe reach out to Todd @ https://lowboymotorsports.com/ He does a bunch of notch covers for his in-house rear frame set-ups. He might be able to help get you started in a direction you can finish. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-26-2021, 09:16 AM	#3
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Suggestions on where to buy a notch cover Like the watts link setup. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.