NOS 72 arm rest part # - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 01-31-2021, 01:34 PM

Just checking to see if anyone can confirm if later run NOS 72 arm rests had part numbers molded on the bottoms. I know the early ones do.
Thanks.

72supr · 01-31-2021, 05:28 PM

I don’t know if this answers your question but I’m looking for an answer myself. The top one has the part # molded into it and is the original on a 72.The bottom one you can see the # I’m thinking it might not be a GM. Pic is upside down for sure.

Tuff Gong · 02-01-2021, 12:56 AM

Might be Abe to zoom in and get the numbers

**too much stuff** · 02-01-2021, 10:07 AM

Quote:

Originally Posted by Tuff Gong

Might be Abe to zoom in and get the numbers

Thanks for the pic. This is what i am wondering about. The one on the right clearly has numbers and i don't see any on the left. Can you verify?

**CUSTOM/10** · 02-01-2021, 10:10 AM

I have had them with and without part numbers, in gm boxes.

**too much stuff** · 02-01-2021, 04:52 PM

Quote:

Originally Posted by CUSTOM/10

I have had them with and without part numbers, in gm boxes.

Do you remember if the shine and texture was similar for the ones without parts numbers?

**CUSTOM/10** · 02-02-2021, 08:37 AM

I still have a set, I'll check and see if they have numbers, shine & texture.

Quote:

Originally Posted by too much stuff

Do you remember if the shine and texture was similar for the ones without parts numbers?

**CUSTOM/10** · 02-02-2021, 10:33 AM

Mine look like "Tuff Gong" and the part# is different from whats on the box. Maybe a new run & part#.

**too much stuff** · 02-03-2021, 09:42 AM

Quote:

Originally Posted by CUSTOM/10

Mine look like "Tuff Gong" and the part# is different from whats on the box. Maybe a new run & part#.

Thanks for the pic. I think that answers my question.

**72ironmike** · 02-03-2021, 09:53 AM

Quote:

Originally Posted by CUSTOM/10

I have had them with and without part numbers, in gm boxes.

I can confirm what Gary said. I have opened sealed GM Boxes several times and one did not have a part #. Can't remember which side. Texture was the same.

**too much stuff** · 02-04-2021, 09:24 AM

Quote:

Originally Posted by 72ironmike

I can confirm what Gary said. I have opened sealed GM Boxes several times and one did not have a part #. Can't remember which side. Texture was the same.

Thanks mike.

01-31-2021, 01:34 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	NOS 72 arm rest part # Just checking to see if anyone can confirm if later run NOS 72 arm rests had part numbers molded on the bottoms. I know the early ones do. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-31-2021, 05:28 PM	#2
72supr Registered User Join Date: Oct 2015 Location: Protection S.Dakota Posts: 428	Re: NOS 72 arm rest part # I don’t know if this answers your question but I’m looking for an answer myself. The top one has the part # molded into it and is the original on a 72.The bottom one you can see the # I’m thinking it might not be a GM. Pic is upside down for sure. Attached Images

02-01-2021, 12:56 AM	#3
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,179	Re: NOS 72 arm rest part # Might be Abe to zoom in and get the numbers Attached Images

02-01-2021, 10:10 AM	#5
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: NOS 72 arm rest part # I have had them with and without part numbers, in gm boxes. __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-02-2021, 10:33 AM	#8
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: NOS 72 arm rest part # Mine look like "Tuff Gong" and the part# is different from whats on the box. Maybe a new run & part#. Attached Images __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 02-02-2021 at 10:43 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.