Many small Parts for sale (glove box, horn caps, brackets, hinges, etc) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stelth2002 · 07-07-2004, 11:16 PM

These are just taking up some smaller spaces. Most prices are plus shipping, some are not. If your not happy when you get the parts, ill give you the money back. If you have any questions then shoot me an email to metalmile@gmail.com Thanks

Nice hugger orange glove box. Has the button latch and hinge with it. Its straight with some paint wear. 10 plus shipping.
Barely used flywheel for sbc application. I'll guarantee this is a good one. I know they are 100 plus new, this one has a high estimate of 150 miles on it. 50 plus shipping.
Non AC heater control- is missing one lever. Came from a big c70, parts are the same. moves freely. 10 plus shipping.
Chevrolet aluminum horn cap with rubber groment for a 1967 to 1968. Also for the big 1.5 ton trucks and above until about 1987. 10 shipped
GMC aluminum horn cap with rubber groment for 1967 and up gmc. Also for the big 1.5 ton trucks and above until about 1987. 10 shipped
Shock bracket for coil spring 12 bolt rear and lower trailing arm brackets for both sides. 15 plus shipping.
1967- 1968 Emergency brake unit. Complete and works. 20 plus shipping
Power steering brakets. Includes the 2 shown that i took off my truck this spring. 15 plus shipping.
2 interior lights for a chevy or gmc. neither are cracked and are without harness. 5 shipped a piece.
Drivers side door hinges. May need rebushed, but it was tight on the cab when taken off about 1 year ago. 10 plus shipping.
Washer bottle and braket. 5 plus shipping.
Pan hard bar from 12 bolt rear. 10 plus shipping.
Pulleys and brackets.... im not sure what everyone is. Make offer
A 2.5 inch and 3 inch water pump fan spacer. Both aluminum. 10 shipped a piece

THANKS JT

stelth2002 · 07-07-2004, 11:23 PM

MOre pics

stelth2002 · 07-07-2004, 11:25 PM

more pics

Bob Moore · 07-07-2004, 11:46 PM

Item #6 - rear shock bracket and lower control arm brackets.
I'll take them. Tell me how you want payment and where to send it -
$15 + shipping to 98407. Thanks - Bob

tripp · 07-08-2004, 12:15 AM

i'm interested in the Chevy horn cap.

stelth2002 · 07-08-2004, 12:19 AM

Bob, pm sent.

stelth2002 · 07-13-2004, 11:23 AM

ANyone else interested in anything. You can make offers!

silvertonguedevil · 07-13-2004, 11:41 AM

where in Idaho are you located?

pickupman · 07-13-2004, 02:01 PM

I would be interested in the PS brackets and the 2 pulleys. PM me if you still have them and how much you want for them.
Thanks, Bill

stelth2002 · 07-13-2004, 03:36 PM

silvertongue... Im all over idaho. Actually im in utah right now, but i usually for college i reside in moscow, idaho and i also have family in southern idaho close to wendell.

Pickupman, i sent you a PM.

JT

silvertonguedevil · 07-13-2004, 04:07 PM

My father lives on the Oregon side of the border (By Fruitland). I thought if you were close, I could just have him pick stuff up from you. Anyhoo, I sent you a PM. Thank you.

stelth2002 · 07-13-2004, 04:31 PM

silvertongue, i sent you a PM back. he must live in ontario or something like that then?

JT

silvertonguedevil · 07-13-2004, 06:17 PM

Vale, actually but yes, right there. I sent ya another one.

stelth2002 · 07-15-2004, 11:55 AM

The glove box door, power steering brackets and trailing arm brackets are sold. The rest of the items are still for sale. Make me an offer

PunkRock247 · 07-15-2004, 12:06 PM

I'm interested in the flywheel, can you let me know how much shipping would be to 94550?

stelth2002 · 07-15-2004, 12:28 PM

PunkRock247 PM sent

stelth2002 · 07-15-2004, 08:54 PM

Flywheel is sold

JT

07-07-2004, 11:16 PM	#1
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Many small Parts for sale (glove box, horn caps, brackets, hinges, etc) These are just taking up some smaller spaces. Most prices are plus shipping, some are not. If your not happy when you get the parts, ill give you the money back. If you have any questions then shoot me an email to metalmile@gmail.com Thanks Nice hugger orange glove box. Has the button latch and hinge with it. Its straight with some paint wear. 10 plus shipping. Barely used flywheel for sbc application. I'll guarantee this is a good one. I know they are 100 plus new, this one has a high estimate of 150 miles on it. 50 plus shipping. Non AC heater control- is missing one lever. Came from a big c70, parts are the same. moves freely. 10 plus shipping. Chevrolet aluminum horn cap with rubber groment for a 1967 to 1968. Also for the big 1.5 ton trucks and above until about 1987. 10 shipped GMC aluminum horn cap with rubber groment for 1967 and up gmc. Also for the big 1.5 ton trucks and above until about 1987. 10 shipped Shock bracket for coil spring 12 bolt rear and lower trailing arm brackets for both sides. 15 plus shipping. 1967- 1968 Emergency brake unit. Complete and works. 20 plus shipping Power steering brakets. Includes the 2 shown that i took off my truck this spring. 15 plus shipping. 2 interior lights for a chevy or gmc. neither are cracked and are without harness. 5 shipped a piece. Drivers side door hinges. May need rebushed, but it was tight on the cab when taken off about 1 year ago. 10 plus shipping. Washer bottle and braket. 5 plus shipping. Pan hard bar from 12 bolt rear. 10 plus shipping. Pulleys and brackets.... im not sure what everyone is. Make offer A 2.5 inch and 3 inch water pump fan spacer. Both aluminum. 10 shipped a piece THANKS JT Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-07-2004, 11:23 PM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	MOre pics Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-07-2004, 11:25 PM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	more pics Attached Images __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-07-2004, 11:46 PM	#4
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Parts for sale Item #6 - rear shock bracket and lower control arm brackets. I'll take them. Tell me how you want payment and where to send it - $15 + shipping to 98407. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

07-08-2004, 12:15 AM	#5
tripp Registered User Join Date: Mar 2003 Location: Meansville, Georgia Posts: 218	Chevy horn cap i'm interested in the Chevy horn cap. __________________ 68 SWB Stepside 72 Cheyenne 20 72 SWB Fleetside 72 Suburban 72 2wd Blazer

07-08-2004, 12:19 AM	#6
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Bob, pm sent. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! Last edited by stelth2002; 07-13-2004 at 11:22 AM.

07-13-2004, 11:23 AM	#7
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	ANyone else interested in anything. You can make offers! __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-13-2004, 11:41 AM	#8
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	where in Idaho are you located? __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

07-13-2004, 02:01 PM	#9
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	I would be interested in the PS brackets and the 2 pulleys. PM me if you still have them and how much you want for them. Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

07-13-2004, 03:36 PM	#10
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	silvertongue... Im all over idaho. Actually im in utah right now, but i usually for college i reside in moscow, idaho and i also have family in southern idaho close to wendell. Pickupman, i sent you a PM. JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-13-2004, 04:07 PM	#11
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	My father lives on the Oregon side of the border (By Fruitland). I thought if you were close, I could just have him pick stuff up from you. Anyhoo, I sent you a PM. Thank you. __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

07-13-2004, 04:31 PM	#12
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	silvertongue, i sent you a PM back. he must live in ontario or something like that then? JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-13-2004, 06:17 PM	#13
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Vale, actually but yes, right there. I sent ya another one. __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

07-15-2004, 11:55 AM	#14
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	The glove box door, power steering brackets and trailing arm brackets are sold. The rest of the items are still for sale. Make me an offer __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-15-2004, 12:06 PM	#15
PunkRock247 Registered User Join Date: Dec 2002 Location: Antelope, CA Posts: 44	I'm interested in the flywheel, can you let me know how much shipping would be to 94550? __________________ 1969 Chevrolet C-10 SWB



Register or Log In To remove these advertisements.

07-15-2004, 12:28 PM	#16
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	PunkRock247 PM sent __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-15-2004, 08:54 PM	#17
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Flywheel is sold JT __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

Register or Log In To remove these advertisements.