window fuzzy installation question ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kens65fb · 08-13-2021, 10:47 AM

Is it possible to install the window fuzzies PRIOR to installing the window glass?

It seems that is would make the window fuzzy install easier.

bsarts · 08-13-2021, 11:24 AM

Brothers' has a great youtube vid covering the door assembly and window install

kens65fb · 08-13-2021, 01:02 PM

Quote:

Originally Posted by bsarts

Brothers' has a great youtube vid covering the door assembly and window install

Yes, I saw that video, it was great.

I can't remember where, but I also read something, that someone installed the fuzzies before the glass, and it made the installation easier, as the glass was out of the way.

forestb · 08-14-2021, 07:00 PM

You could probably drop everything including the glass into the door and then install the fuzzies and then bring it back up through the bottom.

61hawk · 08-14-2021, 07:33 PM

That's what I had to do, my glass was about level with the bottom of the window and it was tough to get the first strip in, the second strip was nearly impossible and I'm surprised I didn't bust the glass. There was no bump stop at the bottom of the door to remove to get the glass below the window frame.

I did put them in first, but that makes the rubber strip that goes across the top and down the back a major P-in the-A to fit correctly.

I ended up snapping all of the clips off and drilling (5/64" drillbit) and screwing (#4 flathead screws) the clips in place. They fit at the correct height now as well.

61hawk · 08-14-2021, 07:35 PM

Quote:

Originally Posted by bsarts

Brothers' has a great youtube vid covering the door assembly and window install

I watched it and still haven't figured out how they got them in with the glass in the way.

**nsb29** · 08-15-2021, 03:26 PM

I taped up my glass and installed too long pieces of tape folded back over to the other side of the glass dropped it down into the bottom of the door installed the fuzzies as well as The felts in the channel once they were in place I pulled that long pieces of tape through the fuzzies witch let me let me pull the glass up from the bottom of the door and onto its track then I installed the windwing I also bent the flange that the fuzzies is attached to away from the glass on both sides to give it a little more clearance when the window is all the way up

08-13-2021, 10:47 AM	#1
kens65fb Registered User Join Date: Dec 2018 Location: Dallas, PA Posts: 551	window fuzzy installation question ? Is it possible to install the window fuzzies PRIOR to installing the window glass? It seems that is would make the window fuzzy install easier.

08-13-2021, 11:24 AM	#2
bsarts Registered User Join Date: Jul 2019 Location: Idaho Falls, Id. Posts: 173	Re: window fuzzy installation question ? Brothers' has a great youtube vid covering the door assembly and window install

08-14-2021, 07:33 PM	#5
61hawk Registered User Join Date: Mar 2008 Location: Lexington, SC Posts: 324	Re: window fuzzy installation question ? That's what I had to do, my glass was about level with the bottom of the window and it was tough to get the first strip in, the second strip was nearly impossible and I'm surprised I didn't bust the glass. There was no bump stop at the bottom of the door to remove to get the glass below the window frame. I did put them in first, but that makes the rubber strip that goes across the top and down the back a major P-in the-A to fit correctly. I ended up snapping all of the clips off and drilling (5/64" drillbit) and screwing (#4 flathead screws) the clips in place. They fit at the correct height now as well.

08-15-2021, 03:26 PM	#7
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: window fuzzy installation question ? I taped up my glass and installed too long pieces of tape folded back over to the other side of the glass dropped it down into the bottom of the door installed the fuzzies as well as The felts in the channel once they were in place I pulled that long pieces of tape through the fuzzies witch let me let me pull the glass up from the bottom of the door and onto its track then I installed the windwing I also bent the flange that the fuzzies is attached to away from the glass on both sides to give it a little more clearance when the window is all the way up __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

08-14-2021, 07:00 PM	#4
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: window fuzzy installation question ? You could probably drop everything including the glass into the door and then install the fuzzies and then bring it back up through the bottom.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.