Frame Crossmember Replacement '62 C20 Rear End - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mschwader · 09-01-2021, 11:44 AM

Hi All! Where can I find replacement crossmembers for the rear of my frame? Original owner used the truck on a farm. Welded a hitch to the crossmembers and whatever he was hauling bent them.

**cwcarpenter98** · 09-01-2021, 04:59 PM

I highly doubt any aftermarket company is making those, so your best bet would be to source them from a donor, 60-62 frame.

If you become a supporting member of the site, you can post a WTB add over in the parts section of the board.

Another option would be to contact AspenAuto

BabyBlue64 · 09-02-2021, 03:59 AM

Depends on your situation, but you can also try to heat up the dents in the crossmembers and push the truck with the hitch to something solid. Maybe the crossmembers will come back in original position.

09-01-2021, 11:44 AM	#1
mschwader Registered User Join Date: Jan 2014 Location: milwaukee, wi Posts: 58	Frame Crossmember Replacement '62 C20 Rear End Hi All! Where can I find replacement crossmembers for the rear of my frame? Original owner used the truck on a farm. Welded a hitch to the crossmembers and whatever he was hauling bent them. Attached Images

09-01-2021, 04:59 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Frame Crossmember Replacement '62 C20 Rear End I highly doubt any aftermarket company is making those, so your best bet would be to source them from a donor, 60-62 frame. If you become a supporting member of the site, you can post a WTB add over in the parts section of the board. Another option would be to contact AspenAuto __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

09-02-2021, 03:59 AM	#3
BabyBlue64 Registered User Join Date: Dec 2016 Location: Noordwijkerhout, Netherlands Posts: 56	Re: Frame Crossmember Replacement '62 C20 Rear End Depends on your situation, but you can also try to heat up the dents in the crossmembers and push the truck with the hitch to something solid. Maybe the crossmembers will come back in original position.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.