tube from blower motor to heater box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65chevysub · 09-19-2021, 02:13 PM

Is a salvage yard the only place to find the plastic elbow/tube that goes from the blower motor to the heater box, or are they available online somewhere? Mine fell off, and I can't seem to find them anywhere.
Thanks

Pontiac1976 · 09-20-2021, 12:50 AM

That one of the best or E-bay, GM Dealer parts may still have some. Not sure if Chevrolet classic parts may have them.

65chevysub · 09-22-2021, 09:52 PM

Thanks Pontiac 1976. I'll check ebay

SilverMiner · 09-23-2021, 07:56 PM

Out of curiosity I searched the "Parts and Illustration Catalog" 1979-1984 (you didn't mention what year your truck was) and I was not able to find a part number for that elbow although I do believe I know what you're referring to.

I believe that hose is intended to provide cooling for the electric fan motor, so I would look go to the hardware store and hunt up some generic hose of the proper diameter. But that is only if a junk-yard search fails, because one should be easily found there. I don't suspect many others will have been previously snagged.

.

09-19-2021, 02:13 PM	#1
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,382	tube from blower motor to heater box Is a salvage yard the only place to find the plastic elbow/tube that goes from the blower motor to the heater box, or are they available online somewhere? Mine fell off, and I can't seem to find them anywhere. Thanks

09-20-2021, 12:50 AM	#2
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 766	Re: tube from blower motor to heater box That one of the best or E-bay, GM Dealer parts may still have some. Not sure if Chevrolet classic parts may have them. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

09-22-2021, 09:52 PM	#3
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,382	Re: tube from blower motor to heater box Thanks Pontiac 1976. I'll check ebay

09-23-2021, 07:56 PM	#4
SilverMiner Registered User Join Date: Oct 2005 Location: North Idaho Posts: 335	Re: tube from blower motor to heater box Out of curiosity I searched the "Parts and Illustration Catalog" 1979-1984 (you didn't mention what year your truck was) and I was not able to find a part number for that elbow although I do believe I know what you're referring to. I believe that hose is intended to provide cooling for the electric fan motor, so I would look go to the hardware store and hunt up some generic hose of the proper diameter. But that is only if a junk-yard search fails, because one should be easily found there. I don't suspect many others will have been previously snagged. . __________________ 1980 K10 Suburban Silverado, original 350 w/Qjet swapped to 406sb, TH350C swapped to TH400/205



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.