65 gmc window frame trim. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigmoe · 03-20-2020, 02:09 PM

I have a gmc cab with trim that came with no doors and I got some good c10 doors for it. I’d like to get the gmc trim that goes around the doors window frame. ( have the cab sale pieces so I don’t need a full set): They are in a big u shape. Hopefully I can get clips and figure where to drill the holes in the c10 doors. Anyone know a source for this trim. I assume it’s not reproduced.

forestb · 03-20-2020, 04:04 PM

Did the gms's have the sale pieces? The ones I have seen have some chrome pieces that finish the loop and have a "custom" script in the middle.

forestb · 03-20-2020, 04:07 PM

Here are the ones I have on my chevy with no script

bigmoe · 03-20-2020, 04:32 PM

Yup just like that. I just need the door parts, but for a 64 and up.

sstock · 03-20-2020, 08:46 PM

Careful though forestb are for 63 and down models, 64-to 66 are different because of the door shape. So you can start looking on the 60-66 GMC forum, there was a set fore sale over there a couple months ago.

This is my 64, see the difference?

bigmoe · 03-20-2020, 09:26 PM

Mine is a 64, not a knee knocker.

bigmoe · 03-21-2020, 08:51 AM

The next challenge would be installing them on c10 doors. How do they mount?

forestb · 03-21-2020, 10:55 AM

They attach with bolts and clips that slide back and forth along the trim. So there is a little wiggle room. The clips are in the locations that you can’t reach from the back.

bigmoe · 03-21-2020, 11:07 AM

I wonder if you could 3m them? Lots of people are using 3m on the side trim.

**vetnat** · 03-22-2020, 11:56 PM

Bigmoe, PM me. I believe I may have the parts you need, right here in the land of the plummeting dollar! Off a 66 GMC.

**vetnat** · 03-23-2020, 12:42 AM

Sorry bigmoe. Only have the hoop piece for passenger door. I think I have the rest of the trim pieces from the cab for both sides, but it sounds like you do too.

**vetnat** · 03-23-2020, 11:15 PM

See if this works to post pic. Truck is in first post.

http://67-72chevytrucks.com/vboard/s...d.php?t=745674

**vetnat** · 04-01-2020, 11:59 PM

When I dug out the window trim, I found it has a big crease in it. Must have happened in storage.

**1971 GMC SHORTY** · 04-02-2020, 01:16 AM

I’ve Seen Worst A Good Chrome Shop could Fix That

Vortech · 09-26-2021, 09:17 PM

I think the crease is normal,

03-20-2020, 02:09 PM	#1
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	65 gmc window frame trim. I have a gmc cab with trim that came with no doors and I got some good c10 doors for it. I’d like to get the gmc trim that goes around the doors window frame. ( have the cab sale pieces so I don’t need a full set): They are in a big u shape. Hopefully I can get clips and figure where to drill the holes in the c10 doors. Anyone know a source for this trim. I assume it’s not reproduced. Last edited by bigmoe; 03-22-2020 at 10:43 AM.

03-20-2020, 04:04 PM	#2
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: 65 gmc window frame trim. Did the gms's have the sale pieces? The ones I have seen have some chrome pieces that finish the loop and have a "custom" script in the middle.

03-20-2020, 04:07 PM	#3
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: 65 gmc window frame trim. Here are the ones I have on my chevy with no script Attached Images

03-20-2020, 04:32 PM	#4
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: 65 gmc window frame trim. Yup just like that. I just need the door parts, but for a 64 and up. Last edited by bigmoe; 03-22-2020 at 10:44 AM.

03-20-2020, 08:46 PM	#5
sstock Registered User Join Date: Mar 2014 Location: Tacoma Wa Posts: 146	Re: 65 gmc window frame trim. Careful though forestb are for 63 and down models, 64-to 66 are different because of the door shape. So you can start looking on the 60-66 GMC forum, there was a set fore sale over there a couple months ago. This is my 64, see the difference? Attached Images __________________ 1953 3100 261cu in, sm420, 3.55 torque tube, omaha orange 1964 GMC 1000 series,custom, 305E, sm420

03-20-2020, 09:26 PM	#6
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: 65 gmc window frame trim. Mine is a 64, not a knee knocker.

03-21-2020, 08:51 AM	#7
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: 65 gmc window frame trim. The next challenge would be installing them on c10 doors. How do they mount?

03-21-2020, 10:55 AM	#8
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: 65 gmc window frame trim. They attach with bolts and clips that slide back and forth along the trim. So there is a little wiggle room. The clips are in the locations that you can’t reach from the back.

03-21-2020, 11:07 AM	#9
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: 65 gmc window frame trim. I wonder if you could 3m them? Lots of people are using 3m on the side trim.

03-22-2020, 11:56 PM	#10
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: 65 gmc window frame trim. Bigmoe, PM me. I believe I may have the parts you need, right here in the land of the plummeting dollar! Off a 66 GMC. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

03-23-2020, 12:42 AM	#11
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: 65 gmc window frame trim. Sorry bigmoe. Only have the hoop piece for passenger door. I think I have the rest of the trim pieces from the cab for both sides, but it sounds like you do too. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

03-23-2020, 11:15 PM	#12
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: 65 gmc window frame trim. See if this works to post pic. Truck is in first post. http://67-72chevytrucks.com/vboard/s...d.php?t=745674 __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

04-01-2020, 11:59 PM	#13
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 511	Re: 65 gmc window frame trim. When I dug out the window trim, I found it has a big crease in it. Must have happened in storage. Attached Images __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.

04-02-2020, 01:16 AM	#14
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: 65 gmc window frame trim. I’ve Seen Worst A Good Chrome Shop could Fix That __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

09-26-2021, 09:17 PM	#15
Vortech Registered User Join Date: Nov 2012 Location: San Jose California Posts: 196	Re: 65 gmc window frame trim. I think the crease is normal,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.