|
07-20-2004, 02:08 PM
|
#1 |
|
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
6 inch drop
i'm going to drop my truck 6 inch in the rear with coils springs is there any thing that's need to be done like relocate the shock mounts or will it be fine just with the coils.what else need to done to do this right.thanks
|
|
|
|
07-20-2004, 02:17 PM
|
#2 |
|
Captain Ed
Join Date: Jul 2003
Location: Port Charlotte, FL
Posts: 1,241
|
I dropped mine four inches with coils and had to get an adjustable track bar and shock relocating kit.
|
|
|
|
|
07-20-2004, 02:44 PM
|
#3 |
|
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
ttt
|
|
|
|
|
07-20-2004, 05:00 PM
|
#4 |
|
Registered User
Join Date: Mar 2001
Location: Moore, Ok
Posts: 1,149
|
With a 6 inch drop you'll need to relocate the shock mount and install shocks for the lowered stance. You'll aslo need an adjustable panhard bar or kit of some type. You can get by without a frame notch but you'll probably need to shave down the rear bump stops to give the rear end a little extra travel. I've never used the progressive type aftermarket bump stops but they might be the best way to go if you have problems with bottoming out.
__________________
72 SWB parts and pieces Oklahoma Last edited by Stroker; 07-20-2004 at 05:04 PM. |
|
|
|
|
07-20-2004, 05:42 PM
|
#5 |
|
Watch out for your cornhole !
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
I run the whole ECE 6 inch rear kit with coils, super track bar shock relocators, and KYB shocks.
It is awesome. Hauls heavy loads without bottoming out, yet still rides real well.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
07-20-2004, 07:13 PM
|
#6 |
|
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
thanks alot guys i know what to do now.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
