Reproduction Gauge Cluster Bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kens65fb · 12-09-2021, 10:40 AM

My truck is almost completely painted, and I am starting to assemble all my interior parts.

The original gauge cluster bezel has some cracks, and a slight bend to it so I will be replacing it.

Has anyone purchased a new aftermarket bezel ?

How was the fit & finish?

I am leaning towards a chromed bezel, like this one vs. the painted one.

I already purchased the chrome radio.

Any thoughts, or advice?

88Stanger · 12-09-2021, 10:52 AM

I am not sure if it matters to you, but i went all after market gauges, custom bezel. The bezel is milled alluminium that i will powder coat black, gauges are all Autometer Phantoms (White Face). I have this basic same setup in my 1969 C10 and i really like it, but no doubt it is not cheap....

AcampoDave · 12-09-2021, 11:06 AM

I like chrome too, but the California sun alway seem to find it and reflect back into my eyes when I'm driving.

bigmoe · 12-09-2021, 01:23 PM

I like the chrome. Is that padded dash in the picture something you can buy? Or is it a custom one off?

kens65fb · 12-09-2021, 02:52 PM

Quote:

Originally Posted by bigmoe

I like the chrome. Is that padded dash in the picture something you can buy? Or is it a custom one off?

I guess I wasn't clear, that is not my truck, but one that I grabbed a pic from.

AcampoDave · 12-09-2021, 06:17 PM

I remember years back there was an aftermarket version in ABS plastic. I thought it might be nice...already black, lightweight, and no paint to scratch with the keys around the ignition. I went to look for it a bit back and couldn't find it now. Guess it wasn't so great after all.

**PGSigns** · 12-09-2021, 09:35 PM

I have bought one of the aftermarket painted ones and it was fine.
Jimmy

**The Rocknrod** · 12-10-2021, 07:04 AM

I have an aftermarket chrome unit, fits nicely using stock type gauges.

kens65fb · 12-10-2021, 01:32 PM

Quote:

Originally Posted by The Rocknrod

I have an aftermarket chrome unit, fits nicely using stock type gauges.

Did you install the Headlight switch, wiper switch, and ignition switch to the bezel, before installing the bezel in the dash??

I seems like it would be easier than trying to do it after the bezel is installed.

**The Rocknrod** · 12-10-2021, 01:39 PM

Quote:

Originally Posted by kens65fb

Did you install the Headlight switch, wiper switch, and ignition switch to the bezel, before installing the bezel in the dash??

I seems like it would be easier than trying to do it after the bezel is installed.

I tried that. Didnt work so well for me. OBTW the Trck Shop has a wrench for the ignition switch bezel if you want.

12-09-2021, 10:40 AM	#1
kens65fb Registered User Join Date: Dec 2018 Location: Dallas, PA Posts: 551	Reproduction Gauge Cluster Bezel My truck is almost completely painted, and I am starting to assemble all my interior parts. The original gauge cluster bezel has some cracks, and a slight bend to it so I will be replacing it. Has anyone purchased a new aftermarket bezel ? How was the fit & finish? I am leaning towards a chromed bezel, like this one vs. the painted one. I already purchased the chrome radio. Any thoughts, or advice? Attached Images

12-09-2021, 10:52 AM	#2
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: Reproduction Gauge Cluster Bezel I am not sure if it matters to you, but i went all after market gauges, custom bezel. The bezel is milled alluminium that i will powder coat black, gauges are all Autometer Phantoms (White Face). I have this basic same setup in my 1969 C10 and i really like it, but no doubt it is not cheap.... __________________ John 3:16 - Saved me... God Bless

12-09-2021, 11:06 AM	#3
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,776	Re: Reproduction Gauge Cluster Bezel I like chrome too, but the California sun alway seem to find it and reflect back into my eyes when I'm driving.

12-09-2021, 01:23 PM	#4
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Re: Reproduction Gauge Cluster Bezel I like the chrome. Is that padded dash in the picture something you can buy? Or is it a custom one off?

12-09-2021, 06:17 PM	#6
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,776	Re: Reproduction Gauge Cluster Bezel I remember years back there was an aftermarket version in ABS plastic. I thought it might be nice...already black, lightweight, and no paint to scratch with the keys around the ignition. I went to look for it a bit back and couldn't find it now. Guess it wasn't so great after all. Last edited by AcampoDave; 12-09-2021 at 11:05 PM. Reason: Typo

12-09-2021, 09:35 PM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Reproduction Gauge Cluster Bezel I have bought one of the aftermarket painted ones and it was fine. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

12-10-2021, 07:04 AM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Reproduction Gauge Cluster Bezel I have an aftermarket chrome unit, fits nicely using stock type gauges. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.