TX Rolling Blazer 4x4 Frame

[boynton]

Not really interested in shipping. I have a tractor and can put it on a trailer. The axles I believe are 3:08. If I were to use them, I would rebuild them. The frame is in very good condition with no major cracking. The front frame horn needs about an hour of work and the whole thing needs to be cleaned up. Comes with the 4x4 front and rear drive shafts. Also available is a 4x4 350 transmission for an additional $100 with the frame or $200 separate. The fluid is clean but I make no guarantee on it hence the price.

$1500

[boynton]

A few more

In the last photo you can see where the frame was notched 1/4” or less.

[29od1]

Looks like a 72 frame since the rear frame horns bolt directly to the bumper.

[boynton]

Originally Posted by 29od1

Looks like a 72 frame since the rear frame horns bolt directly to the bumper.

Yes it is a ‘72 GMC frame.

[too much stuff]

What part of texas and when would it need to be picked up? I will be in northern TX this winter.

[boynton]

Originally Posted by too much stuff

What part of texas and when would it need to be picked up? I will be in northern TX this winter.

If we work out a deal it really doesn’t matter when you come get it. I am right off of Interstate 35 at mm 283 which is about an hour north of Austin or an hour south of Waco

[boynton]

Originally Posted by too much stuff

What part of texas and when would it need to be picked up? I will be in northern TX this winter.

Sold received the deposit and look forward to seeing you in February.