American Auto Wire Install - Help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LS short box · 02-13-2022, 10:01 PM

I try to hide the wiring as much as possible. At the firewall I ran the front and rear harness wires along the frame rail.
Make sure you have good grounds. Battery to the engine/frame. Frame to the radiator support. Frame to the rear tail lights.
I regards to the VSS wiring depending on the location you choose for the LT1 ECM I would run the VSS wiring behind the back of the engine.
I also like the split braided wire covering.
Pic of the engine bay on my 68.

02-13-2022, 10:01 PM	#12
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,146	Re: American Auto Wire Install - Help! I try to hide the wiring as much as possible. At the firewall I ran the front and rear harness wires along the frame rail. Make sure you have good grounds. Battery to the engine/frame. Frame to the radiator support. Frame to the rear tail lights. I regards to the VSS wiring depending on the location you choose for the LT1 ECM I would run the VSS wiring behind the back of the engine. I also like the split braided wire covering. Pic of the engine bay on my 68. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.