The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-20-2022, 09:32 PM   #1
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Pondering some theft deterrents…

I know there’s a chance a car or truck will get stolen, however, I was thinking about a few.
One came to mind, having a detachable shifter. I have a five speed trans, so if the shifter is not in the truck, a thief could not drive it away. Of course it could always be towed, but that’s a different story.

Kinda on the same lines as removing the steering wheel, and a shifter would be a little easier to carry.

You guys know if anyone has done this type of removable shifter?
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 03-20-2022, 09:43 PM   #2
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,699
Re: Pondering some theft deterrents…

Just so I understand, you have a floor shifted trans. Do you mean that you would remove the entire shift lever, not just the knob? Would you use the lever for a cane, or something?
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 03-20-2022, 10:02 PM   #3
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,778
Re: Pondering some theft deterrents…

Yep, I used to remove the shifter on my old compound 4 speed as a theft deterrent. Especially when camping. You need strong fingers for compressing and twisting that cap though wow...even if you left it in the back of the truck, the average theif wouldnt have a clue how to put it back in or what gear it was in when you pulled it. Edit: I used to top of my gear oil thru that shifter hole too. It was easy
AcampoDave is offline   Reply With Quote
Old 03-20-2022, 10:25 PM   #4
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Re: Pondering some theft deterrents…

Quote:
Originally Posted by Steeveedee View Post
Just so I understand, you have a floor shifted trans. Do you mean that you would remove the entire shift lever, not just the knob? Would you use the lever for a cane, or something?
Of course there’s no sense in removing the shift knob.

Yes, removing the entire shift lever. It’s not a stock 60-66 trans, it’s out of an S10.

Thinking about welding some sort of connector that would mate the shift lever and be fairly easy to remove.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 03-20-2022, 10:53 PM   #5
61hawk
Registered User
 
61hawk's Avatar
 
Join Date: Mar 2008
Location: Lexington, SC
Posts: 324
Re: Pondering some theft deterrents…

If you have an iPhone or other Apple devices you could always hide an Apple Airtag on the truck. Not a theft deterent but a fairly cheap tracking device. It's about the size of two stacked quarters and works on the Apple network, anyone with an iPhone or other wireless Apple device gets within 800 feet of the tag it updates the location. No monthly fees and the battery lasts about a year. There are similar devices for Android cell phones.

There are YouTube videos of guys having someone take their vehicle and hide it somewhere in the city, the iPhone app will give you navigation directions to it's location. I use one on a horse trailer, but plan on putting one on my truck. If someone wants to take your truck they're going to take it but this gives you a chance to figure out where it is.
61hawk is offline   Reply With Quote
Old 03-20-2022, 10:56 PM   #6
61hawk
Registered User
 
61hawk's Avatar
 
Join Date: Mar 2008
Location: Lexington, SC
Posts: 324
Re: Pondering some theft deterrents…

On the YouTube channel for Vice Grip Garage, his anti-theft device is just to pop the hood and swap the coil wire with a spark plug wire at the distributor cap. Unless you're looking for something it's hard to find because the distributor cap has all 9 wires on it.
61hawk is offline   Reply With Quote
Old 03-20-2022, 11:32 PM   #7
60short
Revitalizing a 6T C10
 
60short's Avatar
 
Join Date: Aug 2017
Location: Santa Barbara, CA
Posts: 222
Re: Pondering some theft deterrents…

I haven't seen this on an older truck, but my favorite idea is a magnetic (reed) switch that was hidden under the dash hooked up to the ignition circuit.

magnet had to be swiped to enable the ignition circuit before the truck could start...

I suppose you could do the same thing with a toggle switch, or the dimmer switch, or one the pull knobs?
__________________
1960 C-10 Apache- "Rusty the Redneck Reject"
1/2 Ton short bed step side.
350 crate motor, 3 speed manual (floor shifted) MKII - Buddy Buckets and Glass Packs
20+ year long term project in process
Lots of Rust, more memories...
60short is offline   Reply With Quote
Old 03-21-2022, 12:38 AM   #8
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Re: Pondering some theft deterrents…

Quote:
Originally Posted by 61hawk View Post
On the YouTube channel for Vice Grip Garage, his anti-theft device is just to pop the hood and swap the coil wire with a spark plug wire at the distributor cap. Unless you're looking for something it's hard to find because the distributor cap has all 9 wires on it.
Not a bad idea, however, I don’t want to open the hood every time I park it.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 03-21-2022, 12:39 AM   #9
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Re: Pondering some theft deterrents…

Quote:
Originally Posted by 60short View Post
I haven't seen this on an older truck, but my favorite idea is a magnetic (reed) switch that was hidden under the dash hooked up to the ignition circuit.

magnet had to be swiped to enable the ignition circuit before the truck could start...

I suppose you could do the same thing with a toggle switch, or the dimmer switch, or one the pull knobs?
That’s a pretty good idea.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 03-21-2022, 12:54 AM   #10
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,778
Re: Pondering some theft deterrents…

Hurst shifters are kind of like what you're describing. And they got the cool factor too.
AcampoDave is offline   Reply With Quote
Old 03-21-2022, 01:08 AM   #11
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Re: Pondering some theft deterrents…

Quote:
Originally Posted by AcampoDave View Post
Hurst shifters are kind of like what you're describing. And they got the cool factor too.
Never seen a Hurst shifter that was detachable. That would be cool.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 03-21-2022, 01:46 AM   #12
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,778
Re: Pondering some theft deterrents…

Quote:
Originally Posted by Asshat View Post
Never seen a Hurst shifter that was detachable. That would be cool.
Not the shifter, just the stick
https://www.speedwaymotors.com/Hurst...hoC2E0QAvD_BwE
AcampoDave is offline   Reply With Quote
Old 03-21-2022, 08:13 AM   #13
bsarts
Registered User
 
bsarts's Avatar
 
Join Date: Jul 2019
Location: Idaho Falls, Id.
Posts: 173
Re: Pondering some theft deterrents…

I put a battery disconnect switch next to the seat with a removeable key. Just ran the negative cables back there. Now I have to run a dedicated ground to the battery for the radio though......
bsarts is offline   Reply With Quote
Old 03-21-2022, 08:20 AM   #14
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Pondering some theft deterrents…

Quote:
Originally Posted by Asshat View Post
I know there’s a chance a car or truck will get stolen, however, I was thinking about a few.
One came to mind, having a detachable shifter. I have a five speed trans, so if the shifter is not in the truck, a thief could not drive it away. Of course it could always be towed, but that’s a different story.

Kinda on the same lines as removing the steering wheel, and a shifter would be a little easier to carry.

You guys know if anyone has done this type of removable shifter?
From what I've been reading, the fact that it had a shifter ( and a clutch pedal) is already a deterrent.

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 03-21-2022, 08:23 AM   #15
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Pondering some theft deterrents…

Quote:
Originally Posted by AcampoDave View Post
The factory Hurst shifter for the New Process A833 (RPO MY6) is like this, except it is retained with a spring clip.

You stab it in for installation; to remove you defeat the clip and slide it out. No threaded fasteners.
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 03-21-2022, 08:26 AM   #16
Keith Seymore
Registered User
 
Keith Seymore's Avatar
 
Join Date: May 2009
Location: Motor City
Posts: 9,226
Re: Pondering some theft deterrents…

My diesel pickup presently has a small fuel leak = unintentional theft deterrent.

If I forget to manually turn on the electric booster pump then it will run for a few seconds and then shut off.

K
__________________
Chevrolet Flint Assembly
1979-1986
GM Full Size Truck Engineering
1986 - 2019
Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926
My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524
Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/
Keith Seymore is offline   Reply With Quote
Old 03-21-2022, 08:31 AM   #17
Thealien
Senior Member
 
Thealien's Avatar
 
Join Date: Jun 2007
Location: Pine Ridge Florida
Posts: 4,135
Re: Pondering some theft deterrents…

The problem I see with most theft deterrents is they will come with a ramp truck with fake signs on the door and just take it. It can be stuck in gear the brakes can be locked on and they’ll just drag it up the ramp. None of the neighbors or nobody will even question it and they will just think you’re sending your vehicle out for some work. I don’t know how to prevent that other than a locked garage with maybe another vehicle in front of it.

I am going to need to figure something out also when my 2 Wheel Dr. is finished. I don’t have a lockable garage at the moment but I’m working on it. A garage that would’ve cost $40-$50,000 around here just a couple of years ago is $80-$100,000 now.
Thealien is offline   Reply With Quote
Old 03-21-2022, 08:50 AM   #18
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,672
Re: Pondering some theft deterrents…

If they want it, they will get it...no matter what you do.....sad times
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is online now   Reply With Quote
Old 03-22-2022, 11:23 PM   #19
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,699
Re: Pondering some theft deterrents…

Quote:
Originally Posted by Asshat View Post
Of course there’s no sense in removing the shift knob.

Yes, removing the entire shift lever. It’s not a stock 60-66 trans, it’s out of an S10.

Thinking about welding some sort of connector that would mate the shift lever and be fairly easy to remove.
I didn't know, or forgot that you had put in a later model trans, thus the stupid question. I'd hate to pull the stock shift lever out of that trans over and over again!
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 03-23-2022, 12:21 AM   #20
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Re: Pondering some theft deterrents…

Quote:
Originally Posted by Steeveedee View Post
I didn't know, or forgot that you had put in a later model trans, thus the stupid question. I'd hate to pull the stock shift lever out of that trans over and over again!
My thought was to puzzle a thief when he enters the vehicle. Most trucks have a shift lever, so when he does not see one it is not possible to really move the truck. Maybe tow it away - of course, this is always possible. As far as driving the truck, there is no shift lever to get it out of reverse. In addition, I would have the floor covered so it was not evident that the shifter was removed. One could even have a small locking door that prevented access to use vise grips on the shifter, even if they get that far.
Maybe just an access door and a simple way of attaching the shift lever, like a male/female slot with a lock pin.
And, take it a step further and disable the ignition switch on the dash. Put a real ignition switch in the small access cover where the shifter is attached.

Maybe this isn’t that practical, I was just trying to think outside the box.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 03-23-2022, 12:28 AM   #21
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,778
Re: Pondering some theft deterrents…

The best thing to have is good "stated value" insurance which is stated higher than the average selling price for your truck. Then do all the sensible things like locking it up and maybe a theft deterrent device. At least if it gets ripped off, the insurance money will allow you to start again but in a better place than where you started from before. I know that everybody loves their specifc classic ride and wants to keep it, but similar to dogs, we learn to love the new one and move on.
AcampoDave is offline   Reply With Quote
Old 03-23-2022, 06:37 AM   #22
SkinnyG
Registered User
 
SkinnyG's Avatar
 
Join Date: Feb 2012
Location: Beautiful BC, Canada, eh?!
Posts: 2,267
Re: Pondering some theft deterrents…

The old VW guys used a shifter that could be key locked into a particular gear.

I've read on here of having a toggle switch that can change the key switch from "starter" to "horn."

A hidden switch to an electric fuel pump, and then you can only drive as far as what's in the float bowl will allow. Probably better than a total kill switch, because then the thief thinks they've won, but then it dies ten feet away.

Alarm systems usually disable the starter wires.

In most of my previous vehicles, I've used aesthetics as my theft deterrent; I'd park next to nicer vehicles.
__________________
1961 Apache: "Grabber Orange" Shortboxed, pancake, step-notch, air-ride, turbo, LS
1977 Silverado: Shortboxed & dropped, potato-potato
V8 Pontiac Firefly (Chevy Sprint): The ultimate engine swap: 5.7L in a 1.0L bag
Lotus Super 7 Replica: Scratch-built street-legal rollerskate
SkinnyG is offline   Reply With Quote
Old 03-25-2022, 02:15 AM   #23
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Re: Pondering some theft deterrents…

Thinking about using a quick disconnect, like an air line coupling; but that may not work out. Possibly a threaded stud on the end of the shift mechanism.
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Old 03-26-2022, 08:09 PM   #24
val1gonzales
Registered User
 
Join Date: Apr 2019
Location: San Antonio
Posts: 124
Re: Pondering some theft deterrents…

With gas prices as crazy as they are now, and might get higher, could use the fuel theft deterrent device from a from the Mad Max V8 interceptor Falcon.
Attached Images
  

Last edited by val1gonzales; 03-26-2022 at 08:12 PM. Reason: add photo
val1gonzales is offline   Reply With Quote
Old 03-26-2022, 09:02 PM   #25
Asshat
Registered User
 
Asshat's Avatar
 
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
Re: Pondering some theft deterrents…

Quote:
Originally Posted by val1gonzales View Post
With gas prices as crazy as they are now, and might get higher, could use the fuel theft deterrent device from a from the Mad Max V8 interceptor Falcon.
How does that work?
__________________
1963 C20, small window, long bed
292, 4-speed
Asshat is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:46 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com