47-55.1 Interesting You tube video on AD truck sheet metal work - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 04-04-2022, 02:39 PM

I'd say we both need some prodding, The wind is blowing 20 mph right now and I don't have any place to work inside.

dsraven · 04-05-2022, 10:13 AM

hey Brian, do you have a link to your channel?
it's kinda funny about the miata, been there, you just gotta finish his project for him so you can get your space back. they stall out just like we do and sometimes they need a little help when they get over their head. they tend to go away rather than face the problem and/or ask for some help.

MARTINSR · 04-05-2022, 10:28 AM

Quote:

Originally Posted by dsraven

hey Brian, do you have a link to your channel?
it's kinda funny about the miata, been there, you just gotta finish his project for him so you can get your space back. they stall out just like we do and sometimes they need a little help when they get over their head. they tend to go away rather than face the problem and/or ask for some help.

I don't have a channel with anything of use for you. I have one video on drawing flames on it, that's it.

https://www.youtube.com/watch?v=Lbk4t_TDs3c

Brian

**Getter-Done** · 04-05-2022, 08:45 PM

Quote:

Originally Posted by MARTINSR

Ahhhhhhhh

Brian

I apologize for my Old person mix-up confusion

I just subbed your channel.
Maybe you will be the next U tube Star

MARTINSR · 04-05-2022, 10:08 PM

Quote:

Originally Posted by Getter-Done

I apologize for my Old person mix-up confusion

I just subbed your channel.
Maybe you will be the next U tube Star

It's all good!

Brian

**mr48chev** · 04-05-2022, 10:38 PM

I just watched the flame video. Now I'll have to dig the doodle pad out.

Now I wish I had had time to take some art and photography classes in high school but 2 hrs of auto shop each day in my Jr and Sr years ate up most of my time for fun electives.

MARTINSR · 04-06-2022, 10:24 AM

LOLOL I took no art, I just drew those flames all over book "covers" remember when you had those on every book? Yeah, I BARELY passed my math classes and stuff, but I had awesome flames drawn all over the covers. LOLOLOLOL

Brian

**mr48chev** · 04-06-2022, 01:39 PM

I used to draw flames and drew a lot of cars when I was a kid, Still draw cars but can only do a straight on side shot. I never got a handle on the angle thing.

MARTINSR · 04-07-2022, 09:58 AM

I do the angle thing, problem is all I will draw are T buckets. LOL

Brian

MARTINSR · 04-07-2022, 10:19 AM

This is on my garage wall, it's a dream drawing I made in 1977 probably during a math class or something. LOL

At that time my truck still had the flat bed and long wheel base 3/4 ton frame. So funny, looks like my truck now. I need to get back to it!

Brian

MARTINSR · 04-07-2022, 10:21 AM

This was done in an art class in high school 1977. It shows my life!

I love my garage covered with memories like this. I have a lot of treasures that mean a lot to me that could have easily been thrown away. So blessed to have them.

Brian

dsraven · 04-07-2022, 10:39 AM

yeah, uhhh, where's the flames big boy?

haha. looks good. nice to see you kept stuff.

**mr48chev** · 04-10-2022, 10:25 PM

From the looks of that it appears that we could know Brian as an illustrator / automotive cartoonist rather than a skilled metal pounder.

MARTINSR · 04-10-2022, 10:47 PM

I fake both.

Brian

**Getter-Done** · 04-10-2022, 10:49 PM

Ya'll don't know Brian very well

**mr48chev** · 04-10-2022, 11:00 PM

I may get to know him better as Boise is a good take a break from driving spot on the way from Toppenish to Wendell and we no doubt will be making a lot of trips to Wendell so we can see the grand baby after this year.

MARTINSR · 04-10-2022, 11:06 PM

Stop on by and help me get my truck done, please.

Brian

**Getter-Done** · 04-10-2022, 11:06 PM

Okay then

04-04-2022, 02:39 PM	#26
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,731	Re: Interesting You tube video on AD truck sheet metal work I'd say we both need some prodding, The wind is blowing 20 mph right now and I don't have any place to work inside. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-05-2022, 10:13 AM	#27
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,372	Re: Interesting You tube video on AD truck sheet metal work hey Brian, do you have a link to your channel? it's kinda funny about the miata, been there, you just gotta finish his project for him so you can get your space back. they stall out just like we do and sometimes they need a little help when they get over their head. they tend to go away rather than face the problem and/or ask for some help.

04-05-2022, 10:38 PM	#31
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,731	Re: Interesting You tube video on AD truck sheet metal work I just watched the flame video. Now I'll have to dig the doodle pad out. Now I wish I had had time to take some art and photography classes in high school but 2 hrs of auto shop each day in my Jr and Sr years ate up most of my time for fun electives. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-06-2022, 10:24 AM	#32
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Interesting You tube video on AD truck sheet metal work LOLOL I took no art, I just drew those flames all over book "covers" remember when you had those on every book? Yeah, I BARELY passed my math classes and stuff, but I had awesome flames drawn all over the covers. LOLOLOLOL Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-06-2022, 01:39 PM	#33
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,731	Re: Interesting You tube video on AD truck sheet metal work I used to draw flames and drew a lot of cars when I was a kid, Still draw cars but can only do a straight on side shot. I never got a handle on the angle thing. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-07-2022, 09:58 AM	#34
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Interesting You tube video on AD truck sheet metal work I do the angle thing, problem is all I will draw are T buckets. LOL Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-07-2022, 10:19 AM	#35
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Interesting You tube video on AD truck sheet metal work This is on my garage wall, it's a dream drawing I made in 1977 probably during a math class or something. LOL At that time my truck still had the flat bed and long wheel base 3/4 ton frame. So funny, looks like my truck now. I need to get back to it! Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-07-2022, 10:21 AM	#36
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Interesting You tube video on AD truck sheet metal work This was done in an art class in high school 1977. It shows my life! I love my garage covered with memories like this. I have a lot of treasures that mean a lot to me that could have easily been thrown away. So blessed to have them. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" Last edited by Rickysnickers; 04-08-2022 at 10:04 AM.

04-07-2022, 10:39 AM	#37
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,372	Re: Interesting You tube video on AD truck sheet metal work yeah, uhhh, where's the flames big boy? haha. looks good. nice to see you kept stuff.

04-10-2022, 10:25 PM	#38
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,731	Re: Interesting You tube video on AD truck sheet metal work From the looks of that it appears that we could know Brian as an illustrator / automotive cartoonist rather than a skilled metal pounder. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-10-2022, 10:47 PM	#39
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Interesting You tube video on AD truck sheet metal work I fake both. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-10-2022, 10:49 PM	#40
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,457	Re: Interesting You tube video on AD truck sheet metal work Ya'll don't know Brian very well __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

04-10-2022, 11:00 PM	#41
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,731	Re: Interesting You tube video on AD truck sheet metal work I may get to know him better as Boise is a good take a break from driving spot on the way from Toppenish to Wendell and we no doubt will be making a lot of trips to Wendell so we can see the grand baby after this year. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-10-2022, 11:06 PM	#42
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Interesting You tube video on AD truck sheet metal work Stop on by and help me get my truck done, please. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.