4" lift pitman arm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tracy · 06-11-2002, 11:40 AM

I PURCHASED A 4" LIFT RECENTLY. I NOW NEED A DROP PITMAN OR WHATEVER ELSE SHOCKS ETC TO COMPLETE IT. I KNOW I'LL PROBABLY GET THE SHOCKS THROUGH 4X4 WHOLESALERS BUT WHERE SHOULD I GET THAT ARM OR DOES ANYONE HAVE ONE FOR SALE?? MY BUDDY SAID HE GOT HIS FROM 4X4 WHOLESALE FOR AROUND $55.

Mudder · 06-11-2002, 12:04 PM

get it when u get your shocks. they are all priced about the same.

**Yukon Jack** · 06-11-2002, 12:30 PM

I got my adjustable drop drag link made by Skyjacker from www.offroaddesign.com It's not on their website, so you would have to call them. Seems it was around $90-100. There aren't any dropped pitman arms that fit the old closed knuckle Dana 44 that was used on my 69 - that's why I had to used the drop drag link.

Mike C · 06-11-2002, 11:35 PM

I got an Explorer Pro Comp from 4 wheel parts wholesalers. I had a $20 coupon so it only cost $35 bucks out the door!

I ran my truck for over 10 years without the arm, but when I did the new drag link and AGR rockcrawler box and pump I figured what the heck and went and added the arm. FYI, all pitman arms are the same for Dana 44s and 8.5" 10 bolts. The one for our trucks has been discontinued so I went with one from a 1992 3/4 ton Suburban (last of the straight axles)

06-11-2002, 11:40 AM	#1
tracy Registered User Join Date: Jul 2000 Location: branson, missouri Posts: 166	4" lift pitman arm I PURCHASED A 4" LIFT RECENTLY. I NOW NEED A DROP PITMAN OR WHATEVER ELSE SHOCKS ETC TO COMPLETE IT. I KNOW I'LL PROBABLY GET THE SHOCKS THROUGH 4X4 WHOLESALERS BUT WHERE SHOULD I GET THAT ARM OR DOES ANYONE HAVE ONE FOR SALE?? MY BUDDY SAID HE GOT HIS FROM 4X4 WHOLESALE FOR AROUND $55. __________________ 72 CHEYENNE 3/4 TON 4X4...14 bolt full float rear.4.10 gear and 350/350/np205 has a little needs a lot!

06-11-2002, 12:04 PM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	same get it when u get your shocks. they are all priced about the same.

06-11-2002, 12:30 PM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	I got my adjustable drop drag link made by Skyjacker from www.offroaddesign.com It's not on their website, so you would have to call them. Seems it was around $90-100. There aren't any dropped pitman arms that fit the old closed knuckle Dana 44 that was used on my 69 - that's why I had to used the drop drag link. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-11-2002, 11:35 PM	#4
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,731	I got an Explorer Pro Comp from 4 wheel parts wholesalers. I had a $20 coupon so it only cost $35 bucks out the door! I ran my truck for over 10 years without the arm, but when I did the new drag link and AGR rockcrawler box and pump I figured what the heck and went and added the arm. FYI, all pitman arms are the same for Dana 44s and 8.5" 10 bolts. The one for our trucks has been discontinued so I went with one from a 1992 3/4 ton Suburban (last of the straight axles) __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.