NC WTB: NP205 mount and support rod - The 1947 - Present Chevrolet & GMC Truck Message Board Network

77K10Silverado · 03-25-2016, 09:05 AM

Just what the title says. Looking for a frame mount and the rod that goes to trans.

**MAXMAN** · 03-25-2016, 10:07 AM

What transmission?

bulldozer1979 · 03-25-2016, 10:28 AM

Is this the frame mount you are in need of ? PM me if it is, thanks

48cj2a · 03-25-2016, 11:04 AM

Here is what the rod to a THM400 looks like:

esbstuff · 03-25-2016, 11:54 AM

Don't think I ever saw a 205/4-speed support rod... but i'm interested. Following...

**MAXMAN** · 03-25-2016, 12:11 PM

Had them for TH400 & TH350 on the earlier trucks when you still got a np205 in a 3/4 ton. I should have a strut, crossmember, converter cover, and strut braces that go to engine mounts for a TH400. Problem is, these are getting difficult to find--at least in my part of the country. I would have to get $250 shipped for the package. If you only need the strut and crossmember, I am probably not interested in breaking up the package.

77K10Silverado · 03-25-2016, 09:58 PM

Quote:

Originally Posted by bulldozer1979

Is this the frame mount you are in need of ? PM me if it is, thanks

No, I have these already. Thx for the reply!
Posted via Mobile Device

77K10Silverado · 03-25-2016, 10:04 PM

Quote:

Originally Posted by MAXMAN

What transmission?

This was a factory TH350/350. I sold that and picked up a 27 spline np205. Was going to try and do the mods and mate it with a 700r4. To be honest, I'm not sure that I really need a brace. I may rig something up from scratch.
Posted via Mobile Device

77K10Silverado · 03-25-2016, 10:06 PM

Quote:

Originally Posted by MAXMAN

Had them for TH400 & TH350 on the earlier trucks when you still got a np205 in a 3/4 ton. I should have a strut, crossmember, converter cover, and strut braces that go to engine mounts for a TH400. Problem is, these are getting difficult to find--at least in my part of the country. I would have to get $250 shipped for the package. If you only need the strut and crossmember, I am probably not interested in breaking up the package.

I'm not quite sure of all the buzzwords you're using. Lol. Do you have pics??
Posted via Mobile Device

48cj2a · 03-25-2016, 10:55 PM

Didn't they stop using them after the HD K transmissions started or was that just the support rods from the flywheel cover up to the motor mounts?

CHEVY072481 · 05-04-2022, 04:41 PM

Do you know the size of the bolts that go to the side transfer case support rod?

SunSoaked · 05-05-2022, 10:52 AM

One things for sure, the quickest way to crack the transmission housing is to add the side brace. There's a reason GM stopped using them.

SunSoaked · 05-05-2022, 10:55 AM

Quote:

Originally Posted by SunSoaked

One things for sure, the quickest way to crack the transmission housing is to add the side brace. There's a reason GM stopped using them.

And I just noticed this thread is 6 years old. lol

03-25-2016, 09:05 AM	#1
77K10Silverado Registered User Join Date: Jul 2014 Location: Winston-Salem, NC Posts: 561	WTB: NP205 mount and support rod Just what the title says. Looking for a frame mount and the rod that goes to trans. __________________ *Mike B.* 77 K10 - http://67-72chevytrucks.com/vboard/s...=1#post6752641

03-25-2016, 10:07 AM	#2
MAXMAN Junior Member Join Date: Jan 2012 Location: WENATCHEE,WA Posts: 80	Re: WTB: NP205 mount and support rod What transmission?

03-25-2016, 10:28 AM	#3
bulldozer1979 Registered User Join Date: Nov 2013 Location: NYC Posts: 126	Re: WTB: NP205 mount and support rod Is this the frame mount you are in need of ? PM me if it is, thanks Attached Images

03-25-2016, 11:04 AM	#4
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: WTB: NP205 mount and support rod Here is what the rod to a THM400 looks like: __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

03-25-2016, 11:54 AM	#5
esbstuff Registered User Join Date: Jun 2011 Location: St Robert, Mo Posts: 730	Re: WTB: NP205 mount and support rod Don't think I ever saw a 205/4-speed support rod... but i'm interested. Following...

03-25-2016, 12:11 PM	#6
MAXMAN Junior Member Join Date: Jan 2012 Location: WENATCHEE,WA Posts: 80	Re: WTB: NP205 mount and support rod Had them for TH400 & TH350 on the earlier trucks when you still got a np205 in a 3/4 ton. I should have a strut, crossmember, converter cover, and strut braces that go to engine mounts for a TH400. Problem is, these are getting difficult to find--at least in my part of the country. I would have to get $250 shipped for the package. If you only need the strut and crossmember, I am probably not interested in breaking up the package.

03-25-2016, 10:55 PM	#10
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: WTB: NP205 mount and support rod Didn't they stop using them after the HD K transmissions started or was that just the support rods from the flywheel cover up to the motor mounts? __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

05-04-2022, 04:41 PM	#11
CHEVY072481 Registered User Join Date: Oct 2011 Location: paris, texas Posts: 4	Re: WTB: NP205 mount and support rod Do you know the size of the bolts that go to the side transfer case support rod?

05-05-2022, 10:52 AM	#12
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: WTB: NP205 mount and support rod One things for sure, the quickest way to crack the transmission housing is to add the side brace. There's a reason GM stopped using them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.