55.2-59 Wood bed finish - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**popeyestruck** · 11-30-2022, 03:11 PM

Spoke with a guy on a woodworkers forum and told him I was using tung oil with a 50/50 mix with mineral spitits first coat and he recommended first coat to use a mix of pure gum turpentine and tung oil on the first coat. Then use the mineral spirits. He said it would help prevent mold and fungus

_Ogre · 12-01-2022, 01:20 PM

good you have a plan
if you were 1500 miles closer i'd give you mineral spirits, i bought 10 gal for $50
it's $20/gal everywhere

11-30-2022, 03:11 PM	#26
popeyestruck Senior Member Join Date: May 2022 Location: Longwood 59 chevy Posts: 333	Re: Wood bed finish Spoke with a guy on a woodworkers forum and told him I was using tung oil with a 50/50 mix with mineral spitits first coat and he recommended first coat to use a mix of pure gum turpentine and tung oil on the first coat. Then use the mineral spirits. He said it would help prevent mold and fungus

12-01-2022, 01:20 PM	#27
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Wood bed finish good you have a plan if you were 1500 miles closer i'd give you mineral spirits, i bought 10 gal for $50 it's $20/gal everywhere __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.