LS PS and 71 steering gear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hounddogs! · 12-30-2022, 10:22 AM

Wanting to make sure I don't overpressure the old steering box with the 5.3 PS pump...

How many shims do I need in the pump? I ask this way because I don't have a pressure gauge setup for this, but I can count to six or so. Thanks.

Loren

cj847 · 12-30-2022, 10:36 AM

I would suggest you hook it up and see. I doubt you will over pressure it. It would be hard to tell anyway as from factory there was little road feel anyway. The only time I would use shims is if you had rack and pinion.

I am actually having the opposite problem. I'm beginning to think it is my box. I will know in about a week when I put another new pump on.

http://67-72chevytrucks.com/vboard/s...d.php?t=840389

**1971Stepside** · 12-30-2022, 11:34 AM

I'm running the 71 steering gear with the LS pump and hydro boost and the gearbox is fine as is.

**LockDoc** · 12-30-2022, 12:05 PM

Quote:

Originally Posted by hounddogs!

Wanting to make sure I don't overpressure the old steering box with the 5.3 PS pump...

How many shims do I need in the pump? I ask this way because I don't have a pressure gauge setup for this, but I can count to six or so. Thanks.

Loren

I have been running the '76 steering box in my '67 Panel Truck with the LS1 power steering pump since 2015. I have had no problems with it. I just had to use the adapters in the steering box for the newer hoses: Borgeson 923122GM o ring adapter.

https://www.amazon.com/Borgeson-925122/dp/B01E2Q1NO4

LockDoc

12-30-2022, 10:22 AM	#1
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 889	LS PS and 71 steering gear Wanting to make sure I don't overpressure the old steering box with the 5.3 PS pump... How many shims do I need in the pump? I ask this way because I don't have a pressure gauge setup for this, but I can count to six or so. Thanks. Loren __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

12-30-2022, 10:36 AM	#2
cj847 Registered User Join Date: Sep 2016 Location: Ozark, MO Posts: 573	Re: LS PS and 71 steering gear I would suggest you hook it up and see. I doubt you will over pressure it. It would be hard to tell anyway as from factory there was little road feel anyway. The only time I would use shims is if you had rack and pinion. I am actually having the opposite problem. I'm beginning to think it is my box. I will know in about a week when I put another new pump on. http://67-72chevytrucks.com/vboard/s...d.php?t=840389

12-30-2022, 11:34 AM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: LS PS and 71 steering gear I'm running the 71 steering gear with the LS pump and hydro boost and the gearbox is fine as is. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.