01-10-2023, 09:51 AM | #1 |
Registered User
Join Date: May 2019
Location: Brandon Manitoba Canada
Posts: 68
|
Weatherstripping
I need new door to cab seals, it looks like there are two types available glue on and push on. Has anybody tried the push on? Do they stay in place? I thought it would be nice not to mess with glue if the push on ones work.
|
01-10-2023, 10:23 AM | #2 |
Senior Member
Join Date: Mar 2015
Location: washington
Posts: 2,296
|
Re: Weatherstripping
I used the Honda Civic seals. Couldn't be happier. They are push on and have had no issues.
More information: https://67-72chevytrucks.com/vboard/...nda+door+seals 06-11 Honda 2dr civic fit. The four doors versions are too short. They come it two colors on the internal plastic. Weatherstripping from a 2013 Ram standard cab truck also works. I purchased my Honda seals new. Noticed they are often "out of stock" now days? Cheers Last edited by Accelo; 01-10-2023 at 10:30 AM. |
01-10-2023, 10:28 AM | #3 |
Registered User
Join Date: Mar 2008
Location: Lexington, SC
Posts: 324
|
Re: Weatherstripping
Go with the Honda Civic weatherstrips and don't look back. They go on perfect and you can remove them if you need to.
Honda 72315-SVA-A01ZA Right Side Honda 72355-SVA-A01ZA Left Side |
01-10-2023, 12:12 PM | #4 |
Registered User
Join Date: Aug 2020
Location: Braunschweig, Lower Saxony, Germany
Posts: 812
|
Re: Weatherstripping
The Honda Civic door seals are fantastic,
they close with a soft click, great
__________________
------------------------------------------- Greetings Harald My 62 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=829782 |
01-10-2023, 01:21 PM | #5 |
Registered User
Join Date: May 2019
Location: Brandon Manitoba Canada
Posts: 68
|
Re: Weatherstripping
OK will try that, thanks for the tip!
|
01-10-2023, 07:01 PM | #6 |
Registered User
Join Date: Sep 2006
Location: Louisiana
Posts: 375
|
Re: Weatherstripping
Couldn't find Civic coupes in pull a part. Ended up getting weatherstrip out of Honda Element with the 60/40 double door. Strips ended up a couple of inches longer than what I needed.
Regards Steve |
01-10-2023, 07:05 PM | #7 |
Senior Member
Join Date: Mar 2016
Location: Sonora California
Posts: 285
|
Re: Weatherstripping
I put new rubber seals on my truck, and they keep the doors from closing completely. I tried trimming them, but I am still having the problem. Will the Honda seals help with that issue?
|
01-11-2023, 11:57 PM | #8 |
Registered User
Join Date: Feb 2013
Location: central California
Posts: 2,776
|
Re: Weatherstripping
They might, but in my experience they always seem to need some door adjustments. It really may depend on if yours has had body panels changed or door hinges worn out. Honda seals are great, and so are the Prescion push ons, but they can't compensate for poor door alignment. In my case I bit the bullet and pulled the fender and cowel corner to get them out of the way and got a helper and adjusted the door. Hinge to cab lets you adjust up/ down and side to side, while hinge to door sets the depth in the frame. It takes patience and a floor jack at the door bottom is a big help too.
|
01-12-2023, 12:50 PM | #9 |
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 995
|
Re: Weatherstripping
Honda seals on my 65 as well. I even managed to find a gray set to match my silver interior.
|
Bookmarks |
|
|