steering box question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**65truckowner** · 03-19-2023, 06:35 PM

I really dont think this flat spot on the bottom of my steering box from my 66 is right. The funny thing is my other steering box has the same flat spot. It looks like someone hit it with a hammer. The seal also is bent to match the flat spot. Is the box junk? I dont see how to install a seal now.

028 by Daniel Crymes, on Flickr

AcampoDave · 03-19-2023, 06:59 PM

Here is a shot from the stock box to my 64. It's a lot different

AcampoDave · 03-19-2023, 07:04 PM

Pitman arm side, no flat spot

**65truckowner** · 03-19-2023, 07:51 PM

The picture is the pitman arm side. I did not think it was right but funny how both my boxes have the same flat spot. Are they junk now?

AcampoDave · 03-19-2023, 08:51 PM

Maybe shoot an email and your pic to Redhead Steering and see what they say.

**65truckowner** · 03-22-2023, 07:47 PM

Are these boxes easy to take apart or is it going to explode when I do

ACK · 03-23-2023, 05:07 PM

I can't say for sure this can be done, but a machine shop can bore it out to make it round if it isn't ovaled out of tolerance. They would also be able to flatten out the top. Both processes would be simple for an experienced shop. There's probably a few of places in your area, drop in with it and talk to them to see what they think and how much it would cost.

03-19-2023, 06:35 PM	#1
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,316	steering box question I really dont think this flat spot on the bottom of my steering box from my 66 is right. The funny thing is my other steering box has the same flat spot. It looks like someone hit it with a hammer. The seal also is bent to match the flat spot. Is the box junk? I dont see how to install a seal now.028 by Daniel Crymes, on Flickr __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

03-19-2023, 06:59 PM	#2
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,776	Re: steering box question Here is a shot from the stock box to my 64. It's a lot different Attached Images

03-19-2023, 07:04 PM	#3
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,776	Re: steering box question Pitman arm side, no flat spot Attached Images

03-19-2023, 07:51 PM	#4
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,316	Re: steering box question The picture is the pitman arm side. I did not think it was right but funny how both my boxes have the same flat spot. Are they junk now? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

03-19-2023, 08:51 PM	#5
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,776	Re: steering box question Maybe shoot an email and your pic to Redhead Steering and see what they say.

03-22-2023, 07:47 PM	#6
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,316	Re: steering box question Are these boxes easy to take apart or is it going to explode when I do __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

03-23-2023, 05:07 PM	#7
ACK Registered User Join Date: Oct 2012 Location: Philly, PA Posts: 540	Re: steering box question I can't say for sure this can be done, but a machine shop can bore it out to make it round if it isn't ovaled out of tolerance. They would also be able to flatten out the top. Both processes would be simple for an experienced shop. There's probably a few of places in your area, drop in with it and talk to them to see what they think and how much it would cost. __________________ My truck ain't dead, it just smells funny.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.