Transmission Hump Height - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Too Slow '90 · 03-25-2023, 07:40 PM

Is the trans hump pictured low or high? I have a base '60 Apache with a three speed manual. I thought they came with the low hump but the rubber mat I just bought is too small so it has me thinking....

Arne · 03-25-2023, 08:39 PM

That looks considerably taller than mine, which I believe is a low hump.

FamilyTruckster65 · 03-25-2023, 09:15 PM

You are both showing pictures of a high hump. Normally the high hump is bolted in and a low hump generally is welded in.

**cwcarpenter98** · 03-25-2023, 09:18 PM

Both of y'all have a high hump. The low hump has a step up at the rear.

The low hump was bolted in on 60-63 floors.

Too Slow '90 · 03-26-2023, 06:44 AM

Thanks to all who responded. So is it normal to have a 3 speed manual and a high hump on a '60? From what I read it should be a low hump from the factory. This is a one owner (family) vehicle that I don't believe has ever been modified before it came to me.

**cwcarpenter98** · 03-26-2023, 09:40 AM

I'm not sure on that, but it's definitely plausible. The front section of the tunnel different between high and low, so if it's been changed in the past, you probably would be able to tell

62c30 · 03-26-2023, 08:10 PM

I have a 61 half ton with a 3 on the tree and a 62 one ton with the factory four speed. Other than the hole for the shifter on the one ton they are the same and both bolt in.

03-25-2023, 07:40 PM	#1
Too Slow '90 Registered User Join Date: Nov 2014 Location: The Old Dominion Posts: 63	Transmission Hump Height Is the trans hump pictured low or high? I have a base '60 Apache with a three speed manual. I thought they came with the low hump but the rubber mat I just bought is too small so it has me thinking.... Attached Images

03-25-2023, 08:39 PM	#2
Arne Registered User Join Date: Sep 2022 Location: Eugene, OR Posts: 490	Re: Transmission Hump Height That looks considerably taller than mine, which I believe is a low hump. __________________ . - Arne Finished Project - 1964 C10 Stepside, mild restomod ————————————

03-25-2023, 09:15 PM	#3
FamilyTruckster65 Registered User Join Date: Dec 2019 Location: Oregon Posts: 158	Re: Transmission Hump Height You are both showing pictures of a high hump. Normally the high hump is bolted in and a low hump generally is welded in.

03-25-2023, 09:18 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Transmission Hump Height Both of y'all have a high hump. The low hump has a step up at the rear. The low hump was bolted in on 60-63 floors. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-26-2023, 06:44 AM	#5
Too Slow '90 Registered User Join Date: Nov 2014 Location: The Old Dominion Posts: 63	Re: Transmission Hump Height Thanks to all who responded. So is it normal to have a 3 speed manual and a high hump on a '60? From what I read it should be a low hump from the factory. This is a one owner (family) vehicle that I don't believe has ever been modified before it came to me.

03-26-2023, 09:40 AM	#6
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Transmission Hump Height I'm not sure on that, but it's definitely plausible. The front section of the tunnel different between high and low, so if it's been changed in the past, you probably would be able to tell __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-26-2023, 08:10 PM	#7
62c30 Registered User Join Date: Jan 2017 Location: Derby Kansas Posts: 386	Re: Transmission Hump Height I have a 61 half ton with a 3 on the tree and a 62 one ton with the factory four speed. Other than the hole for the shifter on the one ton they are the same and both bolt in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.