Blazer half cabs

[CTENTA1]

Originally Posted by Chulisohombre

They chopped out the back window for the rollbar. Kinda kills it as it would need a lot more work to make it a half top again instead of just a sun roof.

I think they used a full top and cut that front portion (home made) like mentioned above.

[Pjay3000]

Hey guys I am new to this I just buy my 71 blazer and I am looking for a half cab

[Pjay3000]

480-695-6728 PJ give me a shout when you get done making one of those would definitely love to get one off you

[Chulisohombre]

Originally Posted by CTENTA1

I think they used a full top and cut that front portion (home made) like mentioned above.

To me it looks like it was a half top to begin with. If they cut down the original top, It would be a flat cut at the back and not have the double drip rail like it has. Either way I have had a double wall homemade one and what they did was cut down a double wall and then put the hatch in place as the back window with bondo and sheet metal. It wasn't too bad looking but I went a different direction with mine and needed space so I sold it.

[Pjay3000]

Cool I finally got one of the guys on here to email me back on the original fiberglass ones we'll see how that goes my buddy has one and it came out pretty clean

[raggedjim]

In this thread a guy built one from a full top for his pickup truck that looks really good...

http://67-72chevytrucks.com/vboard/s...d.php?t=577069

[truckeez]

The New version of the 76-91

[Pjay3000]

Hey if you could give me a call sometime 480-695-6728 I want to see what's on volved I'm getting at half cab thanks

[truckeez]

Originally Posted by Pjay3000

Hey if you could give me a call sometime 480-695-6728 I want to see what's on volved I'm getting at half cab thanks

Well this 76-91 version is pretty much the same as, you get a sheetmetal shop to fab the lower bedwall, get 4 buddies to come over and remove the heavy factory one, and simply bolt in the custom stuff,
(you mask off the floor and wax it and set the bedwall in place temporarily set upward slightly lile 1/32 " pump in scilicone to form the lower bedwall gasket~ clean away excess Tidy-ly)

and once its set up yo then bolt the bewall in place, it seals -But is not stuck to the floor.

[truckeez]

Originally Posted by truckeez

Well this 76-91 version is pretty much the same as, you get a sheetmetal shop to fab the lower bedwall, get 4 buddies to come over and remove the heavy factory one, and simply bolt in the custom stuff,
(you mask off the floor and wax it and set the bedwall in place temporarily set upward slightly lile 1/32 " pump in scilicone to form the lower bedwall gasket~ clean away excess Tidy-ly)

and once its set up yo then bolt the bewall in place, it seals and is not stuck to the floor.

This rear walls lower edge turns back on a 76-91 style, on the 69-72 if goes forward

[Zsanders]

Hey everybody, new to the group. I have a Pacesetter half cab and I’m looking for a bulkhead or a diagram so I can build one. I’ll try and add a pic of my 71 2wd with the half cab on it.

Thanks
Zac

[BigCountryx]

Digging this one up

[Rem701]

Originally Posted by BigCountryx

Digging this one up

Is that your top?

[BigCountryx]

Originally Posted by Rem701

Is that your top?

Yes, needs a little love, but she's mine.

[jlelec]

I have one I am going to sell. Its a fiberglass Pacesetter. Its in good shape, anyone know what these bring? Can post pictures later, its 15 miles away I need a roll bar and a full top.

[invicta455]

interested pending pictures and price

[BigCountryx]

Prolly about 50 bucks, I'm on my way to pick it up, I'll give you double it's worth lol.

[LUV2XCLR8]

Originally Posted by jlelec

I have one I am going to sell. Its a fiberglass Pacesetter. Its in good shape, anyone know what these bring? Can post pictures later, its 15 miles away I need a roll bar and a full top.

IMHO, Pacesetter's do not bring same $ MTP's bring.

(MTP - Minnesota Truck Parts, attaches like factory)

I sold my Pace about 8-10 years ago for $800 with
a Bulkhead. Would estimate $1500 easy "if" it has
the latches, decent shape, and removable divider.