Is this the hole for the parking brake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**K10-Kansas** · 06-06-2023, 07:24 AM

Hi. There was no parking brake on my truck when I bought it. Supposedly it's a 77-78 K10 chassis. I bought a C10 cable from LMC since that's the one that fits my C10 pedal assembly. But maybe it doesn't fit my K10 frame. Is this hole on the frame where this part of the cable is suppose to set in? Also, it seems weird that the parking brake would set outside the frame instead of inside.

**K10-Kansas** · 06-06-2023, 07:32 AM

Other pic

**kwmech** · 06-06-2023, 06:53 PM

The C10 cables may come up short as the 4wd chassis sit higher. AND you're right they should be on the inside of the frame, 'cept for the one coming from the parking brake mechanism

**mongocanfly** · 06-06-2023, 08:48 PM

what you need is a couple of short lines that can be bent back up into the reservoir ,, put the master cyl in a vice or such and start pumping on the piston
lots of utube on this if you cant figure it out

**K10-Kansas** · 06-07-2023, 07:06 AM

Quote:

Originally Posted by mongocanfly

what you need is a couple of short lines that can be bent back up into the reservoir ,, put the master cyl in a vice or such and start pumping on the piston
lots of utube on this if you cant figure it out

Hey Mongo, I deleted that post since I had intended it to be in the other thread.

06-06-2023, 07:24 AM	#1
K10-Kansas Senior Member Join Date: Nov 2022 Location: Kansas City Posts: 497	Is this the hole for the parking brake Hi. There was no parking brake on my truck when I bought it. Supposedly it's a 77-78 K10 chassis. I bought a C10 cable from LMC since that's the one that fits my C10 pedal assembly. But maybe it doesn't fit my K10 frame. Is this hole on the frame where this part of the cable is suppose to set in? Also, it seems weird that the parking brake would set outside the frame instead of inside. Attached Images __________________ 1971 C10 manual cab. 76 4x4 chassis. Cut short frame. Carbureted Blueprint 350, automatic 700r4. ~ James

06-06-2023, 07:32 AM	#2
K10-Kansas Senior Member Join Date: Nov 2022 Location: Kansas City Posts: 497	Re: Is this the hole for the parking brake Other pic Attached Images __________________ 1971 C10 manual cab. 76 4x4 chassis. Cut short frame. Carbureted Blueprint 350, automatic 700r4. ~ James

06-06-2023, 06:53 PM	#3
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,634	Re: Is this the hole for the parking brake The C10 cables may come up short as the 4wd chassis sit higher. AND you're right they should be on the inside of the frame, 'cept for the one coming from the parking brake mechanism

06-06-2023, 08:48 PM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Is this the hole for the parking brake what you need is a couple of short lines that can be bent back up into the reservoir ,, put the master cyl in a vice or such and start pumping on the piston lots of utube on this if you cant figure it out __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.