Where is the best place to buy rocker panels? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bleach · 08-15-2004, 09:14 PM

Well, that's pretty much my question. I need to replace both of mine. Anyone got any ideas on the best made and best priced rocker panels?

*Randy70C-10* · 08-15-2004, 10:12 PM

They all seem about the same quality, mine came from JC Whitney and fit perfect. I think they cost around $15 each, but this was before I knew of this board and the venders.

Blue Beard · 08-15-2004, 10:15 PM

try some of the board dealers.....

are you replacing just the outer units...?

Bleach · 08-15-2004, 10:18 PM

Outer Units.....that's a good question. If you can define outer and their counterpart (inner?) then I will be able to tell you. I didn't know there was more than one! I'm not an old hand, but hey, you gotta start somewhere.

Joe67 · 08-15-2004, 10:21 PM

I agree - check the vendors here on the board.
I'd guess only 1 or 2 companies actually manuf them. maybe one in the USA & one overdseas?

Contact GMCPaul on this site

*dtlilly* · 08-15-2004, 10:46 PM

Outer rockers are what you see from the outside. Inner rockers are a bolt on brace needed for structural integrety. Most cases the inners need replacing if the outers are gone. The inners are cheaper than the outers. I too would suggest going with one of the board vendors.

08-15-2004, 09:14 PM	#1
Bleach this guy Join Date: Apr 2004 Location: Southwest VA Posts: 122	Where is the best place to buy rocker panels? Well, that's pretty much my question. I need to replace both of mine. Anyone got any ideas on the best made and best priced rocker panels?

08-15-2004, 10:15 PM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	try some of the board dealers..... are you replacing just the outer units...? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

08-15-2004, 10:21 PM	#5
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	I agree - check the vendors here on the board. I'd guess only 1 or 2 companies actually manuf them. maybe one in the USA & one overdseas? Contact GMCPaul on this site __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-15-2004, 10:12 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	They all seem about the same quality, mine came from JC Whitney and fit perfect. I think they cost around $15 each, but this was before I knew of this board and the venders.

08-15-2004, 10:18 PM	#4
Bleach this guy Join Date: Apr 2004 Location: Southwest VA Posts: 122	Outer Units.....that's a good question. If you can define outer and their counterpart (inner?) then I will be able to tell you. I didn't know there was more than one! I'm not an old hand, but hey, you gotta start somewhere.

08-15-2004, 10:46 PM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Outer rockers are what you see from the outside. Inner rockers are a bolt on brace needed for structural integrety. Most cases the inners need replacing if the outers are gone. The inners are cheaper than the outers. I too would suggest going with one of the board vendors.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.