55.2-59 Photo needed: 1956 235 throttle linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 08-24-2023, 11:40 AM

Just looking for a picture of the throttle linkage on a stock 235. I already did a google images search and didn't find anything definitive. I installed mine just as the assembly manual shows but the bell crank just doesn't look right and the throttle return spring rubbed on the exhaust pipe when I did a quick mock up. I would like a picture just to confirm I have mine installed correctly. I may move the return spring tab toward the rear one bolt hole yet just so the spring is more parallel to the linkage. The linkage is connected to the carburetor too, Rochester 'B'.

**mr48chev** · 08-25-2023, 05:09 AM

All I can remember is that there is one way that it works and a couple of ways it doesn't work.

57tailgater · 08-25-2023, 11:58 AM

The diagram looks to show the spring connected more towards the rearmost of those 2 cast block ribs where it looks like you are connected near the front one. That may help with the exhaust interference.

dsraven · 08-26-2023, 08:02 PM

how does this compare to yours?
https://www.jalopyjournal.com/forum/...stion.1189596/

08-24-2023, 11:40 AM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Photo needed: 1956 235 throttle linkage Just looking for a picture of the throttle linkage on a stock 235. I already did a google images search and didn't find anything definitive. I installed mine just as the assembly manual shows but the bell crank just doesn't look right and the throttle return spring rubbed on the exhaust pipe when I did a quick mock up. I would like a picture just to confirm I have mine installed correctly. I may move the return spring tab toward the rear one bolt hole yet just so the spring is more parallel to the linkage. The linkage is connected to the carburetor too, Rochester 'B'. Attached Images __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

08-25-2023, 05:09 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,710	Re: Photo needed: 1956 235 throttle linkage All I can remember is that there is one way that it works and a couple of ways it doesn't work. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-25-2023, 11:58 AM	#3
57tailgater Registered User Join Date: Nov 2011 Location: Middle Georgia Posts: 309	Re: Photo needed: 1956 235 throttle linkage The diagram looks to show the spring connected more towards the rearmost of those 2 cast block ribs where it looks like you are connected near the front one. That may help with the exhaust interference.

08-26-2023, 08:02 PM	#4
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,333	Re: Photo needed: 1956 235 throttle linkage how does this compare to yours? https://www.jalopyjournal.com/forum/...stion.1189596/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.