NV WTB, a couple real nice OEM front bumper bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 09-28-2023, 10:50 PM

Like the ones on the left. Nice shape please, like the ones on the left

Thank you

PaulJG · 09-30-2023, 11:48 AM

What do the 'E's look like.

I took picture of this at a 2nd hand store cause I couldnt see that well. Recall seeing 3 bolts.
I sold ones off my 69..but they all had a nice discernible 'A' on them.

**71CHEVYSHORTBED402** · 09-30-2023, 01:01 PM

Quote:

Originally Posted by PaulJG

What do the 'E's look like.

I took picture of this at a 2nd hand store cause I couldnt see that well. Recall seeing 3 bolts.
I sold ones off my 69..but they all had a nice discernible 'A' on them.

The "E" bolts are on the left and stamped under the head. The "C" on the right are stamped at the bolt's end like where yours shows an "A".

PaulJG · 09-30-2023, 01:13 PM

Include a pic of the letter on bottom of bolt your looking for...it might help. The 'A"s are ones I sold on WTB.
I can't discern the letter stamp on ones I saw at 2nd store weeks ago. Previous pic.
Good luck on search.

**71CHEVYSHORTBED402** · 10-02-2023, 02:02 PM

Picture of the bolts I'm looking for. OEM doesn't necessarily have to be stamped "E". The heads look like the set of four in the OP. Thank you

**72ironmike** · 10-02-2023, 05:20 PM

Tony, Do you have a picture of bumper where the inner bolts fit
& is it recessed ?

**71CHEVYSHORTBED402** · 10-02-2023, 07:35 PM

Quote:

Originally Posted by 72ironmike

Tony, Do you have a picture of bumper where the inner bolts fit
& is it recessed ?

Here's one. Note I found all six bolts pictured in the OP on this truck. Figured the two on the right were installed into the outer holes. I'm not sure they're factory correct. Or if installed by the factory, perhaps they're wrong. I know the four on the left are correct.

**72ironmike** · 10-02-2023, 09:47 PM

Do you notice how the inner 4 are recessed ? The outer are not ? I wonder if the outer two were shorter headed because then the depth of the bolt head would all be the same when fastened/tightened ???

**71CHEVYSHORTBED402** · 10-03-2023, 01:03 AM

Quote:

Originally Posted by 72ironmike

Do you notice how the inner 4 are recessed ? The outer are not ? I wonder if the outer two were shorter headed because then the depth of the bolt head would all be the same when fastened/tightened ???

Wow, interesting thought. Perhaps my outer two bolts are original and factory intended after all. Hmm. That would mean I got all the bolts I need

Hmm. I read someplace that those on the left were the only style for a front bumper. Doesn't mean they're right.

On topic, I have this image of all my bumper bolts. The tops of the front bolts ("E" and "C") look pretty darn close, you might be on to something.

**72ironmike** · 10-03-2023, 10:42 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Wow, interesting thought. Perhaps my outer two bolts are original and factory intended after all. Hmm. That would mean I got all the bolts I need

Hmm. I read someplace that those on the left were the only style for a front bumper. Doesn't mean they're right.

On topic, I have this image of all my bumper bolts. The tops of the front bolts ("E" and "C") look pretty darn close, you might be on to something.

Total wild ass guess ! I was looking at my front bumper & thought the painter really torqued those middle bolts until I just purchased a new bumper, saw the recesses and started me thinking. Somebody has to know ? Joesjunk has that all original 4x4, maybe he can eyeball it ?

**71CHEVYSHORTBED402** · 10-03-2023, 11:54 AM

Quote:

Originally Posted by 72ironmike

Total wild ass guess ! I was looking at my front bumper & thought the painter really torqued those middle bolts until I just purchased a new bumper, saw the recesses and started me thinking. Somebody has to know ? Joesjunk has that all original 4x4, maybe he can eyeball it ?

Think I may need to ask

I posted on the subject, no response, though I recalled it was a repeat because I brought it up 2015, where a response was the pair of "C" bolts are wrong. I can't say for sure where they were on the bumper, it would just make sense the outside.

The proposed consensus was they're all like the "E" bolts. Odds many (most, all

) 71-72 bumpers had the same thing, the front just happens to look the same because the difference is at least barely distinguishable. Both heads are 1" diameter, 1" threads.

**71CHEVYSHORTBED402** · 10-03-2023, 02:57 PM

For comparison. OEM bumper with bolts shown in the OP.

09-28-2023, 10:50 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,333	WTB, a couple real nice OEM front bumper bolts Like the ones on the left. Nice shape please, like the ones on the left Thank you Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

09-30-2023, 11:48 AM	#2
PaulJG Registered User Join Date: May 2021 Location: Eureka California Posts: 49	Re: WTB, a couple real nice OEM front bumper bolts What do the 'E's look like. I took picture of this at a 2nd hand store cause I couldnt see that well. Recall seeing 3 bolts. I sold ones off my 69..but they all had a nice discernible 'A' on them. Attached Images __________________ 1970 Barracuda slant 6..the one car I wish I never sold! and long ago 1969 C30 CC soon to be 4x4 1980 Boston Whaler Supercat 17sold, 19sold, 20

09-30-2023, 01:13 PM	#4
PaulJG Registered User Join Date: May 2021 Location: Eureka California Posts: 49	Re: WTB, a couple real nice OEM front bumper bolts Include a pic of the letter on bottom of bolt your looking for...it might help. The 'A"s are ones I sold on WTB. I can't discern the letter stamp on ones I saw at 2nd store weeks ago. Previous pic. Good luck on search. Attached Images __________________ 1970 Barracuda slant 6..the one car I wish I never sold! and long ago 1969 C30 CC soon to be 4x4 1980 Boston Whaler Supercat 17sold, 19sold, 20

10-02-2023, 02:02 PM	#5
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,333	Re: WTB, a couple real nice OEM front bumper bolts Picture of the bolts I'm looking for. OEM doesn't necessarily have to be stamped "E". The heads look like the set of four in the OP. Thank you Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

10-02-2023, 05:20 PM	#6
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,059	Re: WTB, a couple real nice OEM front bumper bolts Tony, Do you have a picture of bumper where the inner bolts fit & is it recessed ?

10-02-2023, 09:47 PM	#8
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,059	Re: WTB, a couple real nice OEM front bumper bolts Do you notice how the inner 4 are recessed ? The outer are not ? I wonder if the outer two were shorter headed because then the depth of the bolt head would all be the same when fastened/tightened ???

10-03-2023, 02:57 PM	#12
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,333	Re: WTB, a couple real nice OEM front bumper bolts For comparison. OEM bumper with bolts shown in the OP. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 10-03-2023 at 04:04 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.