|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-18-2023, 05:20 PM
|
#1 |
|
Registered User
Join Date: Jan 2021
Location: ft worth texas
Posts: 37
|
Need measurement (63 bed rail)
I lost the location of my 2nd from rear bed rail. ( there are 2 holes in the frame near the location of 2nd rail from tail gate bed, and I’m not sure which one is correct location)
See pic for appropriate location (can someone help?) Last edited by ViatminC10; 10-18-2023 at 08:59 PM. |
|
|
|
10-18-2023, 11:03 PM
|
#2 |
|
Senior Member
   
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: Need measurement (63 bed rail)
Long bed or short bed?
Maybe this picture of a 65 c20 frame will help?
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 10-18-2023 at 11:33 PM. |
|
|
|
|
10-19-2023, 07:48 AM
|
#3 |
|
Registered User
Join Date: Jan 2021
Location: ft worth texas
Posts: 37
|
Re: Need measurement (63 bed rail)
Sorry I forgot to mention it is a 63 C10 Long Bed
|
|
|
|
|
10-19-2023, 05:16 PM
|
#4 |
|
Registered User
Join Date: Dec 2016
Location: Canon City, Colorado
Posts: 124
|
Re: Need measurement (63 bed rail)
My '63 LWB, has cross sills at, approximately. 11-5/8" and 22" center line from the end of the frame rail.
|
|
|
|
|
10-19-2023, 10:46 PM
|
#5 |
|
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: Need measurement (63 bed rail)
Ya know, it would have helped if I had understood your question better. That's what I get for some late night reading
 Was totally thinking you were asking about the rear cross member that's no longer in place because of your fuel tank. If I were running that tank, I would probably relocate that rear crossmember as a little bit of extra metal in case someone hits ya
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
10-20-2023, 11:13 AM
|
#6 |
|
Registered User
Join Date: Jan 2021
Location: ft worth texas
Posts: 37
|
Re: Need measurement (63 bed rail)
Thanks guys!!
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
